Juniper GOWEX [juni...@iber-x.com] wrote:
> Thank you very much for your help.
>
> Both RE?s have the same software image. and now my doubts are about
> the configuration, Do I need to edit groups RE0 and re1? In this
> moment I haven?t IP in the fxp0 interface, How I can access the
> Backup RE
See JNCIA guide pag 456.
Setting the burst-size-limit
The Juniper Networks Technical Assistance Center (JTAC) suggests setting
the burst-sizelimit
equal to the amount of traffic forwarded by the interface in 5
milliseconds. Let's look at
an example.
Suppose you have a Gigabit Ethernet interface in
It should be 5ms of the interface speed, not 5ms of the CIR
Stefan Fouant
GPG Key ID: 0xB4C956EC
Sent from my HTC EVO.
- Reply message -
From: "Arun Kumar"
Date: Thu, Mar 8, 2012 6:24 am
Subject: [j-nsp] How to calculate "burst-size-limit" in JUNOS Firewall Policer
To:
Hi All,
I am
Hi All,
I am facing some issues in calculating the right burst size limit for
Firewall policer in Junos. As per the document, the burst size limit is
calculated like below:
1. The minimum value allowed is 1500 bytes.
2. The minimum value should be 10 times of interface MTU.
3. Burst size limit is
> Both RE´s have the same software image. and now my doubts are about the
> configuration, Do I need to edit groups RE0 and re1? In this moment I haven´t
> IP in the fxp0 interface, How I can access the Backup RE from the Master RE
> ?.
>
request routing-engine login (backup | master | other-ro
Thank you very much for your help.
Both RE´s have the same software image. and now my doubts are about the
configuration, Do I need to edit groups RE0 and re1? In this moment I
haven´t IP in the fxp0 interface, How I can access the Backup RE from
the Master RE ?.
Best regards
El 08/03/2
6 matches
Mail list logo
