Re: [j-nsp] Transporting VLAN between two 10GE ports on MX80

Hello. This may help you: http://www.juniper.net/techpubs/software/junos/junos91/mx-solutions-guide/configuring-basic-mx-series-layer-2-features.html 2012/8/29 Robert Hass > Hi > > I need to transport VLAN (switch / bridge) from port xe-0/0/1 (unit > 200) to port xe-0/0/2 (unit 200) on MX80. > I

[j-nsp] Transporting VLAN between two 10GE ports on MX80

Hi I need to transport VLAN (switch / bridge) from port xe-0/0/1 (unit 200) to port xe-0/0/2 (unit 200) on MX80. It it possible ? If yes can anyone paste configuration for this task. Can I enable QinQ for this VLAN also ? BTW. I'm running 10.4S10 Rob _

Re: [j-nsp] Config help with an SRX110 & ADSL

It would be nice to share the configuration stanza after the fix or doing the correction from Josh. Atif On Wed, Aug 29, 2012 at 2:06 AM, Josh Farrelly wrote: > Thanks Dale/Stefan, that's fixed it. Much appreciated. > > Regards, > > Josh Farrelly > Senior Project Engineer > > P +64 9 630 4095 >

Re: [j-nsp] Config help with an SRX110 & ADSL

Thanks Dale/Stefan, that's fixed it. Much appreciated. Regards, Josh Farrelly Senior Project Engineer P +64 9 630 4095 M +64 21 919 885 E j...@base-2.co.nz PO Box 24666, Royal Oak, Auckland 1345. 126 Valley Rd, Mt Eden, Auckland 1024. www.base-2.co.nz -Original Message- From: Ste

Cláudio duarte.u...@gmail.com invited you to check out Dropbox

Cláudio duarte.u...@gmail.com wants you to try Dropbox! Dropbox lets you bring all your photos, docs and videos with you anywhere and share them easily. Accept invitation here: http://www.dropbox.com/el/?r=/referrals/NjI1MTg1MTM3MTc%3Fsrc%3Dreferrals_bulk9%26eh%3D297d757&b=clk:None:4746804672080

Re: [j-nsp] SIP with SRX.

Do you have ALG enabled or disabled on 11.2 ? FYI - We are running 3600. On Tue, Aug 28, 2012 at 9:47 PM, Charlie Allom wrote: > On Tue, Aug 28, 2012 at 09:27:59PM +1000, ashish verma < > ashish.s...@gmail.com> wrote: > > > > Just looking for some recommendations on enabling SIP on SRX platform

Re: [j-nsp] Config help with an SRX110 & ADSL

Oops, I meant to say that you should replace fe-0/0/0.0 with the at-1/0/0.0 interface under the propagate settings, since at-1/0/0.0 is the one receiving the DHCP parameters from upstream. Stefan Fouant JNCIE-SEC, JNCIE-SP, JNCIE-ENT, JNCI Technical Trainer, Juniper Networks Follow us on Twitte

Re: [j-nsp] Config help with an SRX110 & ADSL

Also, your DHCP propagate setting is referencing fe-0/0/0.0 whereas is should be referencing vlan.0, vlan.1 and vlan.2. Per the docs, the propagate option applies to the logical interface which will receive TCP/IP settings from the external network for propagation to the DHCP pool running on the

Re: [j-nsp] LACP Load Balance

Also, you need to send a sizable number of flows to effect a proper distribution. A handful of flows is just not going to cut it, based on the below mentioned hash. Stefan Fouant JNCIE-SEC, JNCIE-SP, JNCIE-ENT, JNCI Technical Trainer, Juniper Networks Follow us on Twitter @JuniperEducate Sent

Re: [j-nsp] SRX NIC Teaming

If memry serves, swithing in cluster mode is added in newer junos versions. from 11.x ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp

Re: [j-nsp] Config help with an SRX110 & ADSL

[Apologies for top post] There are a few problems with the config (once you get basic comms up you'll need to look at your IPsec settings) but I suspect the main problem is that interface at-1/0/0.0 isn't assigned to a security zone (untrust). Cheers, Dale On Aug 28, 2012 8:10 PM, "Josh Farrelly

[j-nsp] SIP with SRX.

Hi All, Just looking for some recommendations on enabling SIP on SRX platform. Are people using SIP ALG and does it behave as intended or have defined specific policies to allow the flow? If someone could give their working policies for reference that would be great. Thanks _

Re: [j-nsp] SRX NIC Teaming

Sure ! It is supported - Message d'origine - De : Wan Tajuddin Wan Hussin [eazy_...@yahoo.com] Envoyé : 28.08.2012 03:47 MST À : "juniper-nsp@puck.nether.net" Objet : [j-nsp] SRX NIC Teaming Hi Expert, Just wondering, Since SRX650 have a built in ethernet switching when in cluster m

[j-nsp] SRX NIC Teaming

Hi Expert, Just wondering, Since SRX650 have a built in ethernet switching when in cluster mode. Can we connect direct from server to SRX and enable NIC teaming to two SRX ( in cluster mode )? Any reference I can use?   \EZ Joe (CCNA,CCSI, BIT Software Engineering) ___

[j-nsp] Config help with an SRX110 & ADSL

Hi guys I'm having a few issues getting traffic to pass on an SRX110 I'm setting up for a branch office. It may be something simple as this is one of the first times setting up a Juniper device. I have a default route, source NAT on the egress zone and policies configured but I can't pass traf

Re: [j-nsp] LACP Load Balance

On 28/08/12 17:20, Mohammad Khalil wrote: > I am trying to make load balancing on the links as I checked the traffic > and its not balanced > Any ideas will be highly appreciated Depending on what traffic you're sending it may not be evenly hashable across the links. Depending on which side is un

[j-nsp] LACP Load Balance

Hi I have two links connected between mx240 and EX4200 The configuration on the mx240 side router# show interfaces ge-2/0/1 speed 1g; link-mode full-duplex; gigether-options { 802.3ad ae1; router# show interfaces ge-2/1/0 speed 1g; link-mode full-duplex; gigether-options { 802.3ad ae1; }