My $0.02 is that I have worked with the EX4200 VCs since they were first
released and they have proved to work very well indeed. This includes first
hand installation / management and also from a service support aspect.
I have also worked with mixed VCs and these have worked extremely well too.
I'
Capacity: Looking at the published numbers, a 4200 VC shows 128Gbps. 4300
shows 320Gbps (this may be the same with the latest Cisco 3800 series).
Functionality: I've had really good success with my GRES testing on a
Juniper VC. The Master and Backup nodes are handled as FPC's in the same
manner th
hey all,
we have an EX9208 that is reporting a Minor alarm as follows:
user@hostname> show system alarms
2 alarms currently active
Alarm time Class Description
2013-09-27 17:40:56 EDT Minor CB 0 Fabric Chip 1 Not Online
2013-09-27 17:40:56 EDT Minor CB 0 Fabric Chip 0 Not Onli
Has anyone configured this up? I'm looking to implement it (testing at
this point) but confused...:)
It looks like you still need to utilize an LT interface to identify which
PFE is going to do the heavy lifting? Believe it or not, I've never
actually configured an LT interface before so this is
___
Arbor Networks 9th Annual Infrastructure Security Survey Now Open
___
Arbor Networks would like to invite you to participate in our annual
infrastructure se
On the 5800 in stream mode (which is the way to go) you must configure a source
address on each node.
Because the logs come from the control plane and NOT the routing engines.
So, the solution is to configure your security log under the groups stanza for
both nodes.
Within each node, you configur
Hello Guys,
I have two SRX 5800 firewalls in cluster active-active mode so both
firewalls carry the session. I configured security logs sent to syslog
server (precisely STRM), below is config.
security log
mode stream;
format sd-syslog;
source-address ;
stream security-logs {
category all
Mounir Mohamed [mounirmoha...@gmail.com] wrote:
> This is not a hardware issue and does not need RMA for the failed REs. They
> only need SSD secure erase sequence and a single reboot. However this has
> to be performed by Juniper engineers. I recommend to contact your SE and he
> will take care ab
The 4500 has a newer module with 64Gbps bi-directional links. The 4550 you can
use two of the modules to get the 256 number.
Phil
> On Oct 9, 2013, at 3:29 AM, "Georgios Vlachos"
> wrote:
>
>
> Juniper VC is 32 Gbps per link (2), hence 64 Gbps full duplex actually.
>
>
> -Original Mes
Juniper VC is 32 Gbps per link (2), hence 64 Gbps full duplex actually.
-Original Message-
From: juniper-nsp [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of
Maarten van der Hoek
Sent: Wednesday, October 09, 2013 9:41 AM
To: 'Phil Fagan'; 'R S'
Cc: 'juniper-nsp'
Subject: Re: [j-
10 matches
Mail list logo
