Hi all,
This will sound like a very weird question, but has anyone seen a scenario
whereby an MX960 with 4 x 10G links always hashes (uses) a single link out
of the 40G bundle ? We have restarted the device, traffic flows in one
direction only use a single link, the reverse path is all 4 links in
Hi,
times will depend on the type of failure.
If the upstream router fails but your link does not go down (for example
if there is a switch between the routers), you will have a BGP session
timeout after 3 minutes (with default config) and then the router starts
to change the routes, which can tak
On 08. aug. 2018 21:16, sameer mughal wrote:
Thanks Ola.
Actually, I want to do this NAT through the interface.
Senario: public ip /32 on interface and private ip belongs to my LAN
segment.
Please advice.
Isn't that about exactly what the Juniper-example does?
set security nat static rule
Thanks Ola.
Actually, I want to do this NAT through the interface.
Senario: public ip /32 on interface and private ip belongs to my LAN
segment.
Please advice.
On Wed, Aug 8, 2018, 3:27 PM Ola Thoresen wrote:
> On 08. aug. 2018 11:44, sameer mughal wrote:
>
> > Hi,
> >
> > Can anyone help me to
Hi,
We currently have two MX5's with three upstreams (two of which have a BGP
session with each MX5). We wanted to get full routes from all upsteams but
were told by a few people at the time that should one peer drop out it
would take 2-3 minutes before the MX5 would pull the routes for the
upstre
On 08. aug. 2018 11:44, sameer mughal wrote:
Hi,
Can anyone help me to configure static NAT bidirectional?
It is pretty straight forward:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-nat-static.html
Rgds.
Ola Thoresen
nLogic AS
__
Hi,
Can anyone help me to configure static NAT bidirectional?
Public IP: 202.101.83.50
Private IP: 10.10.10.80
Actually, i want to configure video conference device and it need ip which
has been white listed from authorities therefore it's necessary to
configure 1-to-1 NAT .
7 matches
Mail list logo