Hi all, I have an EX4200 VC stack where a copper interface (0/8 below) has suddenly became a VC port:
> show virtual-chassis vc-port fpc0: -------------------------------------------------------------------------- Interface Type Trunk Status Speed Neighbor or ID (mbps) ID Interface PIC / Port vcp-0 Dedicated 2 Up 32000 1 vcp-0 vcp-1 Dedicated 1 Up 32000 1 vcp-1 0/8 Auto-Configured -1 Up 1000 fpc1: -------------------------------------------------------------------------- Interface Type Trunk Status Speed Neighbor or ID (mbps) ID Interface PIC / Port vcp-0 Dedicated 2 Up 32000 0 vcp-0 vcp-1 Dedicated 1 Up 32000 0 vcp-1 0/8 Auto-Configured -1 Up 1000 Does anyone know why this would happen or how to safely remove it as a VC-port? I did find the following thread that doesn't really present a solution/explanation: https://forums.juniper.net/t5/Ethernet-Switching/EX3300-normal-port-suddenly-change-to-VC-Port/td-p/302245 Furthermore, it doesn't even appear that copper interfaces are supported as VC-ports on this platform. This VC stack is running 12.3R9.4. Any suggestions would be appreciated. Thanks, Josh _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp