Re: [j-nsp] MC-LAG reliability

cheers and merry xmas Alberto Santos CCIE #26648 JNCIP-SP *"...Fix your DNS, make it dual-stack, take your mail server and make it dual-stack, take your web server and make it dual-stack..." by Randy Bush/RIPE IPv6* On 22 December 2016 at 15:15, Vincent Bernat wrote: > Hey! > >

Re: [j-nsp] MC-LAG error on MX-104

Hi, I've seem this before, usually it happens when the active and standby are config with the same chassis-id 0 or 1 and/or the standby MX is also configured with active mode. cheers, Alberto On 11 December 2015 at 17:49, Marcelio Webster wrote: > Hi! > > > Send us the configurations > Tks >

[j-nsp] Working config for NG-MVPN/mLDP + Inter AS option B or C

Hi, is there anyone running ng-mvpn/mldp + Inter AS option B or C that could share a working config from a PE/RR/ASBR? Best Regards, Alberto ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp

[j-nsp] VPLS stuck in VC-Dn - inet.3 lookup problem

Hi, I'm set upping VPLS + Inter AS option B with the following topology and I'm noticing a lookup problem between ASBRs. LAN |--(AC)-PE-PASBR1ASBR2(AC)--| LAN since I'm only running eBGP family l2vpn, ASBR2 does not have any other route in inet3 that could be use to bring

[j-nsp] clear show class-of-service fabric statistics summary

Hi, Do you know if it is possible to clear show class-of-service fabric statistics summary ? thx BR Alberto ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp

[j-nsp] Mcast support on Olive/VMware

Hi, Has anyone been able to run mcast over emX interfaces on Olive/VMware? I read some articles about it and it would be supported, but it requires a Kernel module (which I can't find syscall.ko) and set some mcast flags in the Kernel. Does it really work? or should I try QEMU instead? cheers A

[j-nsp] Juniper Cisco DS-TE RDM

Hi list, I'm trying to setup a DS-TEM RDM environment, but as soon as I config RDM on the cisco side IS-IS does't come up correctly on Junos and it also keep complaining about the the subtvl for DS-TE. Jan 7 11:19:03.107022 ERROR: ISIS ignored a bad packet: L1 LSP id ..0004.00-00 from 00

Re: [j-nsp] similar ASA feature (RRI) on SRX

Hi, it looks like a possibility, but the remote IP address keeps changing because it is dialup connection. can't monitor the next hop. BR *Alberto Santos * CCIE #26648 JNCIS-SP - ITIL-F *"...Fix your DNS, make it dual-stack, take your mail server and make it dual-stack, take your

[j-nsp] similar ASA feature (RRI) on SRX

Hi there, I'm swapping a cisco ASA and I found myself stuck on how configure any similar to cisco RRI(reverse route injection) feature on junos,I'm load balacing with a BigIP between them and I need to know where the tunnel is active in order to advertise it on OSPF, has anyone experience any in t

Re: [j-nsp] Reg: 6VPE - Inter-AS

Hi VikramS, I see you are using option B and LDP as transport label protocol between two AS, but I fail to find a IGP between them. I didn't test it yet, so this is my guessing would be IPv6 to IPv4 requires extra lookup and since there is no IGP running between two ASs, based on ur config there i

[j-nsp] SRX 5800 cluster reports 100% of CPU through snmpget

Hey everyone, I'm facing difficult times with srx5800 and snmpget. I have a cluster which reports it is running over 100% CPU for it's RE0, but it is not. Have someone ever seen this before? Routing Engine status: Slot 0: Current state Master Election priority

[j-nsp] Static route into inet.2 problem

Hi, I'm having trouble config a static route into inet.2 which seats inside a routing instance, When I set a IP next hop it doesn't even show up, set routing-instances X_VRF routing-options rib X_VRF.inet.2 static route n.n.n.n/27 next-hop n.n.n.n but if I change it to, for example, reject it wo