ation-msb;
destination-lsb;
}
}
}
}
}
From: Doan Nguyen
To: Mario Andres Rueda Jaimes ;
"juniper-nsp@puck.nether.net"
Sent: Monday, September 26, 2011 1:46 PM
Subject: Re: [j-nsp] TRAFFIC DIST
Mario,
we've just finished testing a similar setup except with aggregate ethernet.
There isn't anything wrong with your configs but make sure your traffic flow
does simulate a good range of source/destination IP space. This is the same
for your source/destination port range. We had around 2000 s
Have you thought about using SCU/DCU tagging and having the firewall filter
force traffic based on that?
BGP could tag routes with SCU/DCU based on community string attribute, once in
the router you could
apply firewall filter at the PFE level to force traffic based on the SCU/DCU
tagging. The
Hi,
are you basically trying to redirect traffic from host and internet to take a
detour box "access server" not shown on the topo, that is strictly hanging off
from
router A? All your FBF needs to happen on router A if you're to enforce
traffic
to take a detour to your local access server.
Starting JUNOS a requirement for cflowd to work is to configure NTP as
Stefan pointed out a few emails earlier.
--- On Wed, 8/18/10, sth...@nethelp.no wrote:
From: sth...@nethelp.no
Subject: Re: [j-nsp] Flow accounting on an M7i
To: a...@ctdam.com
Cc: juniper-nsp@puck.nether.net
Date: Wed
Tim,
the difference between sampling with the PIC vs. using the RE is that with the
PIC
the router sends the entire packet to the pic vs. the IP header. With this
bandwidth
to the PIC is probably more of the limiting factor for your sampling rate.
With the RE
you do not have the bandwidth iss
Hi,
has anyone seen where your FPC has a constantly high CPU and interrupt? If so
what could be causing this?
thanks,
-Doan
-
Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.
___
Hi,
does anyone know the specific error message you would look for if you get a
malformed update from your neighbor causing you to reset your BGP session?
In the advisory they showed this...
error code of "UPDATE message error" (3) and a sub-code of "Malformed
Attribute List" (1)
Would this
8 matches
Mail list logo