Re: [j-nsp] Juniper 6PE

Hi Vlad, I'm attaching the snippet of 6PE sample configuration. Hope this help! Regards, Hangu 2011/1/21 Vlad Ion > Hi, > > Can anyone please lend me a hand with a sample configuration for 6PE on > J-series routers since Google was not helpful at all so far in this quest > of > mine? > > This

Re: [j-nsp] LINE VTY IN JUNIPER

Hi, You can do it as follwoing to restirct the connections, t...@router# set system services telnet connection-limit ? Possible completions: Maximum number of allowed connections (1..250) -Hangu On Mon, Jan 19, 2009 at 9:46 PM, shariq qamar wrote: > Hh guys , > > to restrict and allow a

Re: [j-nsp] flexible-vlan-services

Hi Marlon, Do you mean flexible-vlan-taggig? If yes, it simultaneously support transmission of 802.1Q VLAN single-tag and dual-tag frames on logical interfaces on the same Ethernet port. -Hangu On Thu, Jan 15, 2009 at 8:21 AM, Marlon Duksa wrote: > Hi - does anyone know what this command does

Re: [j-nsp] M320 SW upgrade from Junos 8.4 to 9.2

Hi, Refer to following instructions to upgrade to 9.2, In JUNOS Release 8.5, the JUNOS software was extended to use FreeBSD version 6.1. As a result, the following requirements apply when you upgrade your routing platform to JUNOS Release 8.5 and later: For J-series, M-series, MX-series, and T-

Re: [j-nsp] multicast load-balance

Hi BIT, You can use join-load-balance as below, http://www.juniper.net/techpubs/software/junos/junos90/swconfig-multicast/configuring-pim-join-load-balancing.html#id-join-load-bal-guidelines [edit protocols pim] rp { static { address 10.10.10.1; } } interface all { mode sparse; version 2; } jo

Re: [j-nsp] 4:1 oversubscription

In case of 4:1 oversubscription, you can get only 1G wire rate performance of the PIC even there are 4 GE ports on it. -Hangu On Thu, Nov 20, 2008 at 10:42 PM, Andrew Jimmy <[EMAIL PROTECTED]> wrote: > Can someone please explain what does mean by 4:1 or 2:1 oversubscription? > > > > A 4-port Giga

Re: [j-nsp] FRR MIB

AFAIK, there is no FRR enterprise MIB in JUNOS yet. You can check JUNOS ernterprise MIBs as below link. http://www.juniper.net/techpubs/software/junos/junos93/swconfig-net-mgmt/juniper-specific-mibs-junos-nm.html#jN18D0B -Hangu On Thu, Nov 20, 2008 at 4:38 PM, vijaya simha reddy aedavelli < [EMA

Re: [j-nsp] FRR MIB

Hi Vijay, FRR related information is cluded in MPLS-MIB as below, mplsPathProperties OBJECT-TYPE SYNTAX INTEGER { record-route(1), adaptive(2), cspf(4), mergeable(8), preemptable(16), preemptive(32),

Re: [j-nsp] rewrite-rules being applied, despite not being configured

Hi, As my experience, if the interface is participated in MPLS, default exp rewrite rule is applied always. It is only for exp rewrite not for others, looks like document bug. Hope this help! Regards, Hangu On Tue, Oct 28, 2008 at 6:39 AM, David Ball <[EMAIL PROTECTED]> wrote: > If I'm readi

Re: [j-nsp] SNMP interface index change after upgrade to 9.2

Your assumption is correct, actually router maintain snmp index as below file, So there is no snmp index changes across reboots. router# file show /var/db/dcd.snmp_ix /* file-format-version: 1 */ /* * mib2d-generated /var/db/dcd.snmp_ix * Version: MIB2D release 9.2R1.10 built by builder on 200

Re: [j-nsp] Limitation Aggreate Ethernet T-series

Hi David, As I know, there is no any interface limitation of AE but some SFP, IQ specific features not supported on AE. For more detail information, check below link http://www.juniper.net/techpubs/software/junos/junos84/swconfig84-network-interfaces/id-12190637.html#id-12190637 Regards, Hangu