Re: [j-nsp] SRX: rate-limiting source NAT sources

security-zone trust screen session-limit There should be no license needed for this feature.Here is how to configure this: http://www.juniper.net/techpubs/en_US/junos12.1/topics/example/denial-of-service-firewall-source-based-session-limit-setting-cli.html -- Hans Kristian Eiken 2012/10/29

Re: [j-nsp] L2L SRX - Linux

yet to find a situations where this is do not work in ScreenOS 6.3, where the ability came to map several SA's to a route based vpn tunnel. -- Hans Kristian Eiken 2012/10/26 Nick Kritsky > By the way, does anybody know if SRX/Netscreen route-based VPNs use > any sort of transport en

Re: [j-nsp] VPN between SRX with dynamic IP address to Cisco ASA

make it possible to initiate traffic inside the tunnel from the asa side. -- Hans Kristian Eiken ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp

Re: [j-nsp] some questions about junipter router and firewall

> 3/ I use the putty to logon to get config. but it won't be good as > there is many more in screen. How can I remove it? > "set console page 0" will stop the pager from stopping on the end of each screen. -- Hans Kristian Eiken

Re: [j-nsp] Juniper ISG 2000 throughput Analysis

2010/11/26 tahir mirza > Hi All, > > I want to monitor throughput statistics of Juniper ISG 2000. Is it possible > via gui, commandline or any tool? > For general statistics and history I find a mrtg kind of system fetching info via snmp the best. You should observe interface packets and bits, c

Re: [j-nsp] Logging default deny traffic on SSG-550?

me that it also ends up in the traffic log as policy id 32000 (ns-5gt). Be aware of the possible impact on the cpu on logging all denied sessions. -- Hans Kristian Eiken ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp