[j-nsp] Juniper MX240-40G License required?

Hello Everyone     We're wondering if we get a second hand Router with this config, we would need some kind of license ? it will be intended in using for routing, ospf, BGP, and possibly NAT * MX240BASE * MIC3-3D-2X40GE-QSFPP * MX-MPC3E-3D MPC3 Thanks!

[j-nsp] Juniper M120 - SSD Replacement

Hello Guys Could  you please tell me a good SSD replacement for this Routing Engine (RE-A-2000)?? thanks ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp

Re: [j-nsp] M20 issues installing Junos 10

I rebuild the pcmcia junos installer and it works, but it means that for each new installation i have to remake the pcmcia?, does any one of you have the same experience ? Thanks On 30/05/2012 11:34 a.m., Juan C. Crespo R. wrote: It will not help because I'm installing from pcmcia

Re: [j-nsp] M20 issues installing Junos 10

ay 30, 2012, at 11:35 PM, "Juan C. Crespo R." wrote: I'm trying to install from the pcmcia boot installer the RE HD and CF has been low level formatted Any Idea? On 30/05/2012 10:31 a.m., sth...@nethelp.no wrote: The MD5 Match Perfect as file checksum md5 /var/junos/install-med

Re: [j-nsp] M20 issues installing Junos 10

I'm trying to install from the pcmcia boot installer the RE HD and CF has been low level formatted Any Idea? On 30/05/2012 10:31 a.m., sth...@nethelp.no wrote: The MD5 Match Perfect as file checksum md5 /var/junos/install-media-10.4R3.4-domestic MD5 (/var/junos/install-media-10.4R3.4-domest

Re: [j-nsp] M20 issues installing Junos 10

The MD5 Match Perfect as file checksum md5 /var/junos/install-media-10.4R3.4-domestic MD5 (/var/junos/install-media-10.4R3.4-domestic) = 61f1a2e585049a91e09cbe4c75a50c7d http://www.juniper.net/support/products/junos/dom/10.4/juniper_junosdom.xml install-media-10.4R3.4-domestic367585280system=

[j-nsp] M20 issues installing Junos 10

Hi Guys I've been trying to install the Junos 10 into one M20 with Routing Engine 3.0 (with one SSD of 8GB) and I getting this error Adding jbase... gzip: stdin: invalid compressed data--format violated tar: Unexpected EOF in archive tar: Error is not recoverable: exiting now Any idea?

[j-nsp] Memory Module for Juniper M20 SSB-E

Guys Does anyone of you have the exact link where I can buy a 8 Memory Modules? or if you wish could anyone of you send me a quote? I have spend 200US$ on not compatibles memory modules Thanks ___ juniper-nsp mailing list juniper-nsp@puck.ne

[j-nsp] Traffic Manager Appliance to limit or block P2P

Guys We are looking to limit the P2P(kazaa, winMX, Ares) traffic in ours POP could any one of you give us some advices? we're considering netscreen solution Thanks ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mai

[j-nsp] M20 SSB E Memory seller required

Guys Does anyone of you could suggest me where I can find memory modules for SSB-E ? Thanks JC ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp

[j-nsp] Memmory for M20 SSB-E

Guys Does anyone of you knows where I can find the modules for one Juniper M20 SSB-E ?, I've tried a lot on Ebay & Google with no useful results :( Thanks ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listin

Re: [j-nsp] Does any one knows who fix Juniper Power Supply?

-AC-S 740-001465 Revision 7 and earlier M20 DC PWR-M20-DC-S 740-001466 Revision 8 and earlier regards, martin 2011/4/4 Juan C. Crespo R.: You're completely right Thanks On 04/04/2011 10:03 a.m., Paul Stewart wrote: Presume you have no J-Care on them? -Original Message- From: ju

Re: [j-nsp] Does any one knows who fix Juniper Power Supply?

You're completely right Thanks On 04/04/2011 10:03 a.m., Paul Stewart wrote: Presume you have no J-Care on them? -Original Message- From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Juan C. Crespo R. Sent: Monday, April 04, 2011

[j-nsp] Does any one knows who fix Juniper Power Supply?

Hi Guys, could any one of you tell me some company who can repair Juniper Power Supply? I got 3 with the FAN Failed Alarm, but all the FANS are Working so I don't know what to do!!!, if any one of you could give me a hand with any company contacts, i will appreciate this too much.!

[j-nsp] Cisco Reflexive Access-list

Guys I have been trying to find a translation of this Cisco feature but is almost impossible to find it, so please give me a hand IP access-list extended OUTBOUND permit tcp any any reflect permit udp any any reflect permit icmp any any reflect ip access-list extended INBOUND evaluate OUTBOUN

Re: [j-nsp] M20 FPC PIC's Screws

THANKS! Eric Van Tol escribió: http://juniper.cluepon.net/index.php/Screws -Original Message- From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp- boun...@puck.nether.net] On Behalf Of Juan C. Crespo R. Sent: Monday, February 08, 2010 9:30 AM To: juniper-nsp

[j-nsp] M20 FPC PIC's Screws

Guys Does any one of you could tell me any URL where i can buy a lot of screw to fit the PICS in the FPC? Thanks ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp

[j-nsp] Help please..

-- ---///---///-///- ///---//-/// -///-///--///-///--- *Juan C. Crespo R. Gerencia de Red *IFX Networks Venezuela 0800 3654632 0212 2057500 0212 9523655 www.ifxnw.com.ve ___ juniper-nsp mailing list juniper-nsp

[j-nsp] Cisco Translation

Dears Could anyone of you sendme a translation about the configuration below from Cisco to Junos? ip route 192.168.0.0 255.255.255.0 null 0 254 ! This is for generate the network ip prefix-list BGP-OUT seq 10 permit 192.168.0.0/24 route-map BGP-OUT match ip prefix-list BGP-OUT set l

[j-nsp] DS3 Cable Question

Hi Dears Does any one of you knows where I can buy cables SMB Plug to BNC Jack? and if this cables haves something special ? Thanks ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp

Re: [j-nsp] BGP community format question

I don't have User account on Juniper .. :( Peder Bach escribió: > Try this tool :-) > > > https://i2j.juniper.net/release/index.jsp > > > > - Peder > > On 8/27/07, Juan C. Crespo R. <[EMAIL PROTECTED]> wrote: > >> Hi >> >>Does a

[j-nsp] BGP community format question

Hi Does any one knows how its the translation of this ip community-list in Cisco to Junos? ip community-list 101 permit A:620 A:1521_ A:1522_ A:1523_ A:5128 ip community-list 101 permit A:121_ ip community-list 101 permit A:122_ ip community-list 101 permit A

Re: [j-nsp] Problem with boot after JunOS upgrade (7.5 -> 8.1R3.3)

jinstall images are for clean install, the correct image for update its jbundle Regards :D JC Yevgeniy Voloshin escribió: > Hi Group, > > I have a problem with boot on M7i after upgrade JunOS: > request system software validate /var/tmp/jinstall- > 8.1R3.3-export-signed.tgz > request system s

[j-nsp] Juniper M20 SNMP Libs

Dears Does Anyone knows where i can download the SNMP Libs for one M20? I need to monitor CPU Utilization, Memmory, Temperature ..and other values.. Any comments will be apreciated.. Thanks ___ juniper-nsp mailing list juniper-nsp@puck.nether.n

[j-nsp] how to import one config file

Dears Does anyone knows how to import one config file into one M20?, this is because we replace the RE, because the old one was broken :(, any comments will be apreciated. Thanks ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://pu

Re: [j-nsp] MPLS-in-MPLS mtu

With 1524 to 1530 of MTU size should works, but remember you will need to increase the MTU on your Switch too.. Greetings :) Jonas Frey escribió: > Jared, > > i've done this on most of my network. However the 12 port FE pic > (P/PE-12FE-TX) only does 1532 bytes max MTU (and this only with newer

Re: [j-nsp] Issues with Boot

wever, Juniper uses a > specific HDD sets from diff. manufactures built for specific network > purposes, HA, lots of logging, 24/7 environment. There isn't a lot of HDD of > this kind on the market. I would rather RMA-it. > > ----- Original Message > From: Juan C. Crespo R

Re: [j-nsp] Issues with Boot

By the way, I want ask you, It is possible change the Hard Drive without any problem? Thanks Juan C. Crespo R. escribió: > but I have another problem, when I try to install with the Ata Flash > Disk, it shows FreeBSD installation Menu, not the automatic install process, > > Any Ide

Re: [j-nsp] Issues with Boot

Original Message > From: Juan C. Crespo R. <[EMAIL PROTECTED]> > To: Juniper Request Help List > Sent: Wednesday, March 21, 2007 7:19:03 PM > Subject: [j-nsp] Issues with Boot > > > Hi dears > > > I'm getting problem booting one M20, I try to make

[j-nsp] Issues with Boot

Hi dears I'm getting problem booting one M20, I try to make it boot from one ATA compact flash with the Junos Ver 4 and looks like the CF was broken or something wrong, I just remember the unit was alarming with Heat, but was working Ok. The M20 was working with Junos 7.4 Ver. Trying to

Re: [j-nsp] MPLS VPN LAYER 3 translation from cisco to M20

abl inet.0: 5/5/0 bgp.l3vpn.0: 3/3/0 L3VPN.inet.0: 3/3/0 e.f.g.hASASA 83796741 0 1 6:07:49 Establ inet.0: 211818/211840/0 bgp.l3vpn.0: 118/124/0 L3VPN.inet.0: 116/123/0 Thanks so much :D Georgi Yalamov escribió: > Juan C. Crespo R. wrote: &g

[j-nsp] MPLS VPN LAYER 3 translation from cisco to M20

Dears Anyone could help me translating this config from a Cisco to a Juniper M20? STATIC ROUTE ip route X.X.X.X 255.255.255.252 Serial0 name L3VPN ip vrf L3VPN rd ASASA:1 route-target export ASASA:1 route-target import ASASA:2 address-family vpnv4 neighbor a.b.

Re: [j-nsp] [Fwd: How to upgrade from Junos4.01]

Thanks!! Finally the Junos 7 its installed, but I did it on force mode, because in normal mode, the installer script get errors and get stop. request system software add /var/tmp/jinstall-7.0R2.7-domestic-signed.tar.gz force Pekka Savola escribió: On Thu, 25 Jan 2007, Jonathan Looney wrot

[j-nsp] [Fwd: How to upgrade from Junos4.01]

Hi I'm getting started with one M20, and I'm trying upgrade from the Junos 4.0R1 to 7, but it fail, because the file system is full?? but how?? the HD have 8Gb of size?? Any Idea?¿? Thanks root> show system storage Filesystem 1K-blocks UsedAvail Capacity Mounted on /dev/wd0s1a