[j-nsp] Parameters of "default_arp_policer"

Hi, We have observed so many arp packet on router: M120_R1> show policer __default_arp_policer__ Policers: Name Packets __default_arp_policer__ 915263815 Have a query regarding "default_arp_policer" :- >

Re: [j-nsp] JUNOS-secondary Path

Hello, Can we see the configuration done for MPLS LSPs and which Junos Version you are running on ? Thx.. On Sat, Feb 2, 2013 at 5:27 PM, Ahmed Taha wrote: > > Dear Obrien, I couldn't get your words " config or it didn't happen" > > > > > > > > > > > > > > From: obri...@missouri.edu > > To: a

Re: [j-nsp] Junos-RSVP-TE_nested_paths_RFC4206

Hi, Please share the configuration... BR// On Tue, Feb 7, 2012 at 3:32 AM, Victor Lyapunov wrote: > Hello All > > I have been trying to perform a simple to test for RSVP-TE testing > according to RFC4206. Specifically my test topology is the following > > PE1<=>CORE1<=>CORE2<=>CORE3<=>R2 > > Al

[j-nsp] Observing "error: device vlan not found"

Hello Experts, During the configuration for vlan and vlan l3-interfaces we observed "error: device vlan not found". Following is configuration which i did on MX80 (11.2R3): interfaces { ge-0/0/0 { unit 0 { family bridge { interface-mode access;

[j-nsp] Port mirroring issue

Hi, While configuring the Port Mirroring on MX router (MPC 3D 16x 10GE) I am getting following log message: *chassisd[1396]: Ignoring unsupported port-mirror instance config on PIC: FPC 0 PIC 0* Configuration for the same is as given below: show configuration forwarding-options port-mirroring

[j-nsp] Sampling under the routing-instance

Hi, I would like to know that if we can do the sampling under the routing-instance for version 5. example: set routing-instances ABC forwarding-options sampling.. Thanks.. ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether

[j-nsp] PORT Mirroring on MX480

Hi All, I have one query regarding the port mirroring on MX480 from "ge-5/2/0" to "xe-4/0/0", following is the configuration: *show forwarding-options *port-mirroring { instance { gids { input { rate 1; run-length 0; }

[j-nsp] Can the ae interface count any errors that are occuring on an individual interface ?

Hello All, I am having one query and would like to know if it happens: If the physical interfaces under the ae interface occuring some errors then will the ae interface count for the same. Regards, Sunny ___ juniper-nsp mailing list juniper-nsp@puck.n

Re: [j-nsp] Output for "show bgp summary" is showing different on twoREs

techpubs/en_US/junos11.1/topics/reference/requirements/nsr-system-requirements.html#nsr-bgp> > Note, for instance, inet-vpn multicast AFI is not supported for NSR. > HTH > Rgds > Alex > > > - Original Message - From: "saurabh sood" > To: > Sent: Saturda

Re: [j-nsp] Output for "show bgp summary" is showing different on two REs

; From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp- > > boun...@puck.nether.net] On Behalf Of saurabh sood > > Sent: Saturday, June 25, 2011 9:41 AM > > To: juniper-nsp@puck.nether.net > > Subject: [j-nsp] Output for "show bgp summary" is showing differe

[j-nsp] Output for "show bgp summary" is showing different on two REs

Hello, I have observed a different scenario, i don't know wthr it is by expected or not. Router has two REs and GRES, NSR is enabled also commit synchronize is there. But while checking the output for "show bgp summary" then on Master RE everything is showing ok. On the other hand backup RE is s