Re: [j-nsp] generate a default route question

Hi William, As someone else pointed out, what you need is a static route, not a generated route. You want to point your default gateway to a host on the 1.1.1/24 network, so set your route to 0/0 to that host. The static route will be removed from the routing table if the interface goes down, so n

Re: [j-nsp] Problem with boot after JunOS upgrade (7.5 -> 8.1R3.3)

Hi Yevgeniy, Actually, the jbundle image should not be used for an upgrade. The release notes state this at the beginning of the instructions for the upgrade on M-Series devices: "When upgrading or downgrading the JUNOS software, always use the jinstall package. Use other packages (such as the jb

Re: [j-nsp] Load Balancing via BGP outbound at Colo

Hi Jack, So, if I understand correctly, you'll have the following: Router A A ---1000Mb/s-- ISP #1 A ---10Mb/s---ISP #2 A ---10Mb/s---ISP #3 A ---10Mb/s---ISP #10 | | | Router B | B ---1000Mb/s---

Re: [j-nsp] Splitting E1 possibility in Juniper?

Hi Fredrik, You should be able to do it if you're running PPP, Frame Relay, or Cisco HDLC on those timeslots. You'd need to configure the ds, ce1, or e1 interfaces as required, add the appropriate encapsulation with "ccc", and then configure local interface switching. Here's an example that was d