the 2 PICs
but noway !!!
set logical-routers PE2 interfaces fe-0/2/0 unit 0 family inet address
10.0.123.1/30
set logical-routers PE3 interfaces fe-0/3/0 unit 0 family inet address
10.0.123.2/30
any idea
On Wed, Dec 22, 2010 at 9:24 AM, juniper light wrote:
> thanks Nilesh and Cristi
RIGHT ON M10
I will write it 1000 times to never forget it :)
anyway , thank tou guys.
Kind Regards/ Mounir
On Wed, Dec 22, 2010 at 11:10 AM, juniper light wrote:
> hi again ,
>
> i tried this time using 1x G/E, 1000 BASE-SX connected to annother router
> and it is working.
>
s. If you find some
> > route marked as rejected you could think in some problem of connectivity
> > in L1.
> >
> > Good luck
> >
> > logo impre
> > Ing. Cristian Frizziero
> > Honorio Pueyrredon 1475 -- Buenos Aires
> > Tel+54.11.4855.6041 (Ex
and to switch the PIC to a different fpc
> slot, just to be sure that there is no hardware issue
>
> The configuration looks fine
>
> Cristian
>
>
>
>
>
>
>
>
>
> El 21/12/2010 15:07, juniper light escribió:
>
> Hi guys,
> I would
Hi guys,
I would like to use M10 to simulate 3 PE, using logical-routers ( Junos
8.4R4.2 )
I connected 2 fastethernet back-to-back, link are UP. but when I tried
configuring vlan-id , I cannot ping from one Logical router to the other :
first scenario using Vlan-tagging :
set logical-routers PE2
Hi Team,
I'm working on multiple OSPF instance (each on its own vrf) described on th
scenario bellow :
R1, R2 (M20) and my R3(M7i) are connected on the same L2 switch (same area
0.0.0.1)
R1 and R2 already established OSPF election and can exchange their route
under OSPF, but M7i Ospf still fail
hi all,
I need some help regarding authentication, by error when i tried to change
my password on M7i router, i did :
set system root-authentication encrypted-password test
of course i should put an encrypted password instead of a clair text passwd
"test"
and when i tried to log on the router agai
7 matches
Mail list logo
