l 2008 23:01
À : Briant,A,Alain,JPECS R
Cc : [EMAIL PROTECTED]; juniper-nsp@puck.nether.net
Objet : Re: [j-nsp] VRRP flap between CRS-1 and junos 8.5 M40
[EMAIL PROTECTED] schrieb:
> May I advise you something:
> You are not saying if the flap is when the reboot at the end of the upgrade
[EMAIL PROTECTED] schrieb:
> May I advise you something:
> You are not saying if the flap is when the reboot at the end of the upgrade
> is done or if the flap occurs during the upgrade.
> - So does you M40 have a redundant routing engine or not ?
> - Are you doing the upgrade on the passive rout
08 14:07
À : juniper-nsp@puck.nether.net
Objet : [j-nsp] VRRP flap between CRS-1 and junos 8.5 M40
Hi, i have vrrp running between M40 and Cisco crs-1 IOS XR, with junos code of
8.5 and IOS 3.4.1. There is a vrrp running between these two routers, but from
the time of juniper upgrade, the VRRP be
Sorry on that typo...
It is 300 milliseconds.
swamy.
--- "P.Narayana Swamy" <[EMAIL PROTECTED]> wrote:
> Rupesh,
>
> Can you try changing VRRP Fast-interval to 300
> seconds
> or more in M40 and check for the response.
> Also check the advertisement interval in CRS to
> match
> with M40.
>
>
Rupesh,
Can you try changing VRRP Fast-interval to 300 seconds
or more in M40 and check for the response.
Also check the advertisement interval in CRS to match
with M40.
Regards,
Swamy.
You rock. That's
Hi Rupesh,
What i make out from yr question is vrrp master changes during the OS
upgrade of M40 , but thats how it is suppose to work as during the upgrade
the RE goes down so the CRS which is VRRP backup becomes master , when the
RE of M40 is up n then its will becomes the VRRP Master again .
M
Hi, i have vrrp running between M40 and Cisco crs-1 IOS XR, with junos code of
8.5 and IOS 3.4.1. There is a vrrp running between these two routers, but from
the time of juniper upgrade, the VRRP between Juniper and Cisco CRS-1 Flaps.
This flapping i.e. switch between master and slave is being o
7 matches
Mail list logo
