Re: [j-nsp] EOMPLS between 10G subinterface and GE subinterface between two 7600 with Juniper MX480 as CE1

2010-02-19 Thread Mark Tinka
On Saturday 20 February 2010 12:45:17 am Ioan Branet wrote: > There is no problem with IOS because on another 7609 with > same IOS the EOMPLS circuit works the only difference > is that on the 7609 on which the EOMPLS won't works is > that i have redundant processors and the following > modu

Re: [j-nsp] EOMPLS between 10G subinterface and GE subinterface between two 7600 with Juniper MX480 as CE1

2010-02-19 Thread Ioan Branet
Hello, I use 7609 with the following IOS: #sh ver | i IOS Cisco IOS Software, c7600s72033_rp Software (c7600s72033_rp-ADVIPSERVICESK9-M), Version 12.2(33)SRB4, RELEASE SOFTWARE (fc3) There is no problem with IOS because on another 7609 with same IOS the EOMPLS circuit works the only difference

Re: [j-nsp] EOMPLS between 10G subinterface and GE subinterface between two 7600 with Juniper MX480 as CE1

2010-02-19 Thread Mark Tinka
On Friday 19 February 2010 04:52:30 pm Ioan Branet wrote: > I used a 6500 instead of 7600 as PE1 and connect this > 6500 to Juniper MX (PE1-CE1 link) and it works,it seems > that the problem is with this Cisco 7600,maybe a bug or > something like this. You probably mentioned this in an earlier

Re: [j-nsp] EOMPLS between 10G subinterface and GE subinterface between two 7600 with Juniper MX480 as CE1

2010-02-19 Thread Ioan Branet
Hello, I used a 6500 instead of 7600 as PE1 and connect this 6500 to Juniper MX (PE1-CE1 link) and it works,it seems that the problem is with this Cisco 7600,maybe a bug or something like this. Thank you for your help, John On Fri, Feb 19, 2010 at 9:53 AM, Ioan Branet wrote: > Hello, > > Here

Re: [j-nsp] EOMPLS between 10G subinterface and GE subinterface between two 7600 with Juniper MX480 as CE1

2010-02-18 Thread Ioan Branet
Hello, Here is a ping result with monitor traffic activated on xe-3/1/0. I Ping the other CE and it seems that the ping leaves the Juniper interface: I also create an extended access list on CE2 and debub ip packet detail 199 #sh ip access-lists 199 Extended IP access list 199 10 permit icm

Re: [j-nsp] EOMPLS between 10G subinterface and GE subinterface between two 7600 with Juniper MX480 as CE1

2010-02-18 Thread Aditya mahale
Couple of things: 1. When you ping from Juniper CE do you know where ping is getting dropped? If you do monitor traffic on Juniper xe-3/1/0 do you see ping going out? 2. Can you please remove accounting and sampling on xe interface and then try? On Wed, Feb 17, 2010 at 11:44 AM, Ioan Branet wro

[j-nsp] EOMPLS between 10G subinterface and GE subinterface between two 7600 with Juniper MX480 as CE1

2010-02-17 Thread Ioan Branet
Hello group, I have the following setup CE1(Juniper MX480) xe3/1/0.999 -Te7/3.999 PE1(Cisco 7600)PE2(Cisco 7600)Gi2/2.999---SVI 999(7600)CE2 I configured EOMPLS between PE1 and PE2 and if I use Cisco 7600 as CE1 I am able to ping between CE1 and CE2 If I use MX480 Juniper I cant ping betw