Hi,
On Wed, Jul 24, 2013 at 11:27:23AM +1000, Luca Salvatore wrote:
> Just got a couple of new EX4550 switches... current recommended version is
> 12.2r2.5
> But I just saw tha the 12.2 train is up release 5.3.
>
> Just wondering what the rest of you guys are running and if you have any
> horr
I believe 12.3R2 still has the bug where the syslog fills up with erroneous
messages about one or both of the power supplies being removed (12.3R1
complains about the fan tray AND the power supplies). This is finally put to
bed in 12.3R3
Cheers,
Ben
On 24/07/2013, at 7:56 PM, Pierre-Yves Mau
members.
2013/7/24 Phil Bedard :
> This is unrelated somewhat, but what are the current LAG member limits
> as well as ECMP limits? Any restrictions on LAG+ECMP?
>
> phil From: Sam
> Sent: 7/24/2013 8:46
> To: Bouzemarene, Farid (ATS)
> Cc: juniper-nsp@puck.nether.net
> S
arene, Farid (ATS)
> Cc: juniper-nsp@puck.nether.net
> Subject: Re: [j-nsp] EX4550 version
> Hi Farid,
>
> From an old case I had open with Juniper:
>
>> The EX4550 has an ARP table of maximum 8k entries.
>> These entries are tracked in the kernel through something called
This is unrelated somewhat, but what are the current LAG member limits
as well as ECMP limits? Any restrictions on LAG+ECMP?
phil From: Sam
Sent: 7/24/2013 8:46
To: Bouzemarene, Farid (ATS)
Cc: juniper-nsp@puck.nether.net
Subject: Re: [j-nsp] EX4550 version
Hi Farid,
>From an old case I had o
d'origine -
> De : Sam [mailto:sam...@arahant.net]
> Envoyé : Wednesday, July 24, 2013 10:39 AM
> À : Luca Salvatore
> Cc : juniper-nsp@puck.nether.net
> Objet : Re: [j-nsp] EX4550 version
>
> I used the 12.3R2.5 for quite some time now without any issue. The platform
There was a bug in 12.2R3 which cause VC cable not to forward traffic
should be fixed in R4 (look in the list archive for the PSN )
Now I am working with 12.2R3 and R4 without VC
Nitzan
On Wed, Jul 24, 2013 at 10:38 AM, Nick Kritsky wrote:
> I have several running 12.2R1.8, some of them as p
I'll be deploying a couple of EX4550 doing mainly L3/MPLS stuff (ospf,
bgp, l3vpn, l2circuit) and I'm going to roll out 12.3R3.4.
Generally I prefer using at least an R3 release and as Juniper
promised me that 12.3 would be 'the next 11.4' then I'm going for this
one.
2013/7/24 Luca Salvatore :
>
I used the 12.3R2.5 for quite some time now without any issue. The platform has
its limitations (especially related to how MPLS is handled), but if you're just
using it for L2 or basic L3 it works just fine.
--
sam
On 24 Jul 2013, at 03:27, Luca Salvatore wrote:
> Hi All,
>
> Just got a coup
I have several running 12.2R1.8, some of them as pure L2 aggregation
switches, some of them doing basic L3 including OSPF, VRRP. No VC.
No issues found so far.
nick
On Wed, Jul 24, 2013 at 5:27 AM, Luca Salvatore wrote:
> Hi All,
>
> Just got a couple of new EX4550 switches... current recommen
On Wednesday, July 24, 2013 06:56:03 AM Ben Dale wrote:
> I pulled one out of the box the other day and whatever it
> shipped with wouldn't bring up 10G DAC cables (Cisco
> branded) and the backlight on the LCD panel didn't work
> (?!!) until I upgraded it (12.3R3), which fixed both
> issues.
Int
I pulled one out of the box the other day and whatever it shipped with wouldn't
bring up 10G DAC cables (Cisco branded) and the backlight on the LCD panel
didn't work (?!!) until I upgraded it (12.3R3), which fixed both issues.
On 24/07/2013, at 2:49 PM, Mark Tinka wrote:
> On Wednesday, July
On Wednesday, July 24, 2013 03:27:23 AM Luca Salvatore
wrote:
> Just got a couple of new EX4550 switches... current
> recommended version is 12.2r2.5 But I just saw tha the
> 12.2 train is up release 5.3.
>
> Just wondering what the rest of you guys are running and
> if you have any horror stor
Hi All,
Just got a couple of new EX4550 switches... current recommended version is
12.2r2.5
But I just saw tha the 12.2 train is up release 5.3.
Just wondering what the rest of you guys are running and if you have any
horror stories.
I'm not doing VC with these guys, they are going to be a pre
14 matches
Mail list logo
