[j-nsp] FW: Stack of 3 x EX4200's not responding to SNMP Query

Have three EX4200's in a stack. Until recently they were not properly monitored. We have a couple of NMS machines for various monitoring functions. Updated SNMP config: client-list list0 { 10.2.100.55/32; 10.11.33.67/32; 10.11.41.50/32; } community { authorization read-onl

[j-nsp] Fw: new message

Hey! Open message juniper-nsp ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp

[j-nsp] Fw: important

Hello! Important message, please visit juniper-nsp ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp

Re: [j-nsp] FW: 1000Base-T SFP shows Link Up without cable inserted

Hi Thong, We experienced same difficulty on 3rd party 1000base-T SFP. We are preparing few MX5 (JUNOS 11.4R7.5) new deployment, and figured out all of our 3rd party 1000base-T SFP became UP even there is no cable plugged in. Those 3rd party 1000base-T SFP came from different vendors; they are wor

[j-nsp] FW: 1000Base-T SFP shows Link Up without cable inserted

Hi Mathias, We have experience something quite similar with out MX480 BRAS as well. Can remember what version of Junos we were running but it was the "X" track specifically for the subscriber management features instead of the "R" track. It was a 3rd party copper SFP as well. Regards thong

[j-nsp] FW: mahmoud yasin

hello! http://colourviet.com/ohwrokm/vnq/cthpq/sey.html mahmoud yasin ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp

Re: [j-nsp] Fw: L2 Circuits accross domains

> | JNICIS-ent, JNCIS-er, JNCIS-Sec, JNCIA-Ex, Linux+, A+ | > > - > > > > From: Alex Arseniev > To: Peter Nyamukusa ; > juniper-nsp@puck.nether.net > Se

Re: [j-nsp] Fw: L2 Circuits accross domains

; juniper-nsp@puck.nether.net Sent: Tuesday, November 20, 2012 11:07 AM Subject: Re: [j-nsp] Fw: L2 Circuits accross domains Thanks Alex, I had already redistibuted all my loopback into my IGP and all were reachable

Re: [j-nsp] Fw: L2 Circuits accross domains

, 2012 12:28 PM Subject: Re: [j-nsp] Fw: L2 Circuits accross domains You should have remote loopbacks also redistributed into LDP (if your transport label is from LDP). In JUNOS, this does not happen by default, you must have LDP egress-policy for this to occur. By default, LDP announces only

Re: [j-nsp] Fw: L2 Circuits accross domains

(no outgoing label). Before you ask, this is totally different to CSCO IOS which announces all routes (bar BGP ones) as LDP FECs. HTH Rgds Alex - Original Message - From: "Peter Nyamukusa" To: Cc: Sent: Tuesday, November 20, 2012 7:46 AM Subject: [j-nsp] Fw: L2 Circuits accro

[j-nsp] Fw: L2 Circuits accross domains

- Forwarded Message - From: Peter Nyamukusa To: "juniper-nsp@puck.nether.net" Sent: Tuesday, November 20, 2012 9:33 AM Subject: L2 Circuits accross domains Hi Folks, I have an exsisting L3 / L2 MPLS network with Cisco ASR on the Core as PE router and Junper routers as PE router, i

Re: [j-nsp] FW configuations which are required during failover of one db to other !!

On Sun, Jul 22, 2012 at 8:06 AM, Harri Makela wrote: > Hi All > > Application Server connecting successfully to DataBase Server01 (db01). This > DB01 now need to mirror to db02 and port 5022 will be used. > > Requirement : Application Servers which currently access DB01 should be able > to acces

[j-nsp] FW configuations which are required during failover of one db to other !!

Hi All   Application Server connecting successfully to DataBase Server01 (db01). This DB01 now need to mirror to db02 and port 5022 will be used.   Requirement : Application Servers which currently access DB01 should be able to access DB02 when failover to DB02 will happen.  From FW perspective,

[j-nsp] FW: OID for BGP inet/0 and inet6.0

I forgot to mention, this is for an M router From: Darren O'Connor Sent: 20 March 2012 22:05 To: juniper-nsp@puck.nether.net Subject: OID for BGP inet/0 and inet6.0 Hi all. Does anyone know the oid value to get the current inet.0 and inet6.0 BGP total values via SNMP? Thanks Da

[j-nsp] Fw: MX80 Opinions

- Forwarded Message - From: Derick Winkworth To: Richard A Steenbergen Sent: Thursday, June 2, 2011 9:14 PM Subject: Re: [j-nsp] MX80 Opinions Amongst other things.  Like a GDOI Server, or a JUNOScript jump box complete with development environment.  So many things they could instal

Re: [j-nsp] FW: SRX Debug Commands.

@puck.nether.net Subject: Re: [j-nsp] FW: SRX Debug Commands. Hello, check out this KB http://kb.juniper.net/InfoCenter/index?page=content&id=KB16110 HTH, On Tue, Jan 18, 2011 at 12:44, Braham Pal Singh mailto:brahampal.si...@ericsson.com>> wrote: Hi All, We recently have SRX 3600 In the n

Re: [j-nsp] FW: SRX Debug Commands.

Hello, check out this KB http://kb.juniper.net/InfoCenter/index?page=content&id=KB16110 HTH, On Tue, Jan 18, 2011 at 12:44, Braham Pal Singh < brahampal.si...@ericsson.com> wrote: > Hi All, > > We recently have SRX 3600 In the network and In the Earlier Netscreen > Firewall there was a very

[j-nsp] FW: SRX Debug Commands.

Hi All, We recently have SRX 3600 In the network and In the Earlier Netscreen Firewall there was a very Good utlity to Capture and debug comand ( debug flow basic , get dbuff stream etc ) to see the movement of the packet. Does some one has idea as how this function has been transferred to SRX

[j-nsp] FW: M7i FIC GE-SFP Throughput

Argh, nevermind. It's right on the documentation for the PFE: http://www.juniper.net/techpubs/en_US/release-independent/junos/topics/concept/m7i-pfe-architecture.html -Original Message- From: Eric Van Tol Sent: Monday, January 18, 2010 9:11 AM To: juniper-nsp@puck.nether.net Subject: M7

[j-nsp] Fw: L3VPN on J series enhance services

Samin-san Please configure the J-series like this, it should be help... PC-J4350-J2350--PC L3vpn works well when you disable the security feature in Junos Enhance Services ade root# show | no-more ## Last changed: 2009-10-31 09:05:56 UTC version 9.2R4.4; system { root-authent

[j-nsp] Fw: Routers SPF calculation time

Dear Sirs, I would like to collect real-world average SPF calculation times in large OSPF or IS-IS areas. If someone work for a big SP please write it to me. And please if someone answer write also the number of routers and the number links that the area consists, and the type of the router t

[j-nsp] Fw: J-6300 Supports for Optical Link Gbic/SFP/OC1/Oc3

Can any body guide me about that Juniper 6300 router supports Optical Fiber Link (Single Mode) If we can add any cards or modules to support Gbic port/SFP/OC1/OC3 Ports or any way to connect optical fibre back bone I will be thankfull   Thanks Arshad Add more friends to your messenge

[j-nsp] FW: Web Filtering

Hi all,, I want to enable webfiltering on my ssg 20 firewall.I got the license.i tried to implement using the steps. Please send me the steps for doing the same. Thanks In Advance Regards, Rajeev Krishna Pinnacle Computer Systems LLC Office 21, Al Abbar (Splash/Bafco) Building Bur Dubai, N

Re: [j-nsp] Fw: OSPF Adjeceny for Serial Interfaces

o: Juniper Puck > Subject: [j-nsp] Fw: OSPF Adjeceny for Serial Interfaces > Importance: High > > Hi Guys any idea on this. > > regards > abhijeet.c > > > > > - Forwarded Message > From: Abhi <[EMAIL PROTECTED]> > To: Juniper Puck >

[j-nsp] Fw: OSPF Adjeceny for Serial Interfaces

Hi Guys any idea on this. regards abhijeet.c - Forwarded Message From: Abhi <[EMAIL PROTECTED]> To: Juniper Puck Sent: Thursday, June 19, 2008 5:38:18 PM Subject: [j-nsp] OSPF Adjeceny for Serial Interfaces Hi All Is their a method to force OSPF to form adjacency on serial interfa

[j-nsp] FW: Traffic sampling

Thanks to everyone!!! This has solved my problem. I knew it was something simple. One other thing, is their a way to limit the memory used by junos. I have a j2320 and it using 800mb of ram (has 1024) as I have two bgp feeds and the memory usage is growing slowy Thanks again -Original

Re: [j-nsp] FW:

You use the 'get event' command to display or clear event-log messages. You can filter these events using the number value which corresponds to the event type. You can find the list of events and their associated id's on the Juniper site - http://www.juniper.net/techpubs/software/screenos/ under

[j-nsp] FW:

Hello Any one familiar with the get event command in screenos ? I think there are some numbers for specific outputs and I havent found anything.if someone knows them it would be great. Thanks ___ juniper-nsp mailing list juniper-nsp@puc

Re: [j-nsp] Fw: AAA

why you want them to log to another VR? the suggestion is that you configure like this : aaa authentication ppp default radius none - Original Message - From: "sunnyday" <[EMAIL PROTECTED]> To: "Juniper-Nsp" Sent: Tuesday, March 04, 2008 6:25 PM Subject: [j-

[j-nsp] Fw: AAA

Hello i have a E320 and i use radius as authentication. i have one VR and 4 VRFs the thing i want to do is when radius becomes unavailable the users to log to the bras without authentication is this possible. any ideas ___ juniper-nsp mailing

Re: [j-nsp] Fw: BRAS- No queues

seconds when looking at the sh egress rates) Bryan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of M.Mihailidis Sent: Friday, November 02, 2007 7:12 AM To: Juniper-Nsp Subject: [j-nsp] Fw: BRAS- No queues Hello all i get this output from a E320 can anyone tell

[j-nsp] Fw: BRAS- No queues

Hello all i get this output from a E320 can anyone tell me what the * in voice traffic class mean in the output? Thanks in advance dc-bras01(config)#run show egress-queue rates full interf gig 3/0/3.17110001 trafficforwarded aggregate minimum

[j-nsp] FW: VLAN Q-in-Q-Termination on Juniper M-Series ?

sorry... I've found somewhat ... [edit interfaces ge-0/0/0 unit 2000] root# set vlan-tags ? Possible completions: <[Enter]>Execute this command inner[tpid.]vlan-id, tpid format is 0x and is optional outer[tpid.]vlan-id, tpid format is 0x an