On Tuesday, April 30, 2013 11:47:52 PM Eugeniu Patrascu wrote:
> In the Release Notes for JUNOS 12 something for EX, there
> is an example of commit error when you use a protocol
> without a license and you cannot use it. I am missing
> the right link now but it stood out as it was the first
> time
In the Release Notes for JUNOS 12 something for EX, there is an
example of commit error when you use a protocol without a license and
you cannot use it. I am missing the right link now but it stood out as
it was the first time I saw it.
On Wed, May 1, 2013 at 12:32 AM, Mark Tinka wrote:
> On Frid
On Friday, April 26, 2013 06:21:54 PM John pp wrote:
> i have been told its an honor system however
> someone i know bought the license and it was just a piece
> of paper saying they could use it
The rumour is that at some point in the future, Juniper will
add capability in newer release of code
i have been told its an honor system however
someone i know bought the license and it was just a piece of paper saying
they could use it
On Thu, Apr 25, 2013 at 10:04 PM, OBrien, Will wrote:
> My apologies, I didn't pay attention to the blade you referenced.
>
> That blade is only good for swit
My apologies, I didn't pay attention to the blade you referenced.
That blade is only good for switching unless you have the appropriate license
to enable layer 3 protocols.
Here's the document the clarifies what you can do with that card.
http://www.juniper.net/techpubs/en_US/junos10.3/topics/ta
to be clear i need layer 3 features so i can do this under protocols right?
On Thu, Apr 25, 2013 at 6:39 PM, OBrien, Will wrote:
> No license needed. Just configure under protocols.
>
> Will O'Brien
>
> On Apr 25, 2013, at 5:17 PM, "John pp" wrote:
>
> > hi all
> >
> > i have a new MX480 with
No license needed. Just configure under protocols.
Will O'Brien
On Apr 25, 2013, at 5:17 PM, "John pp" wrote:
> hi all
>
> i have a new MX480 with MPC-3D-16XGE-SFPP and I am trying to enable BGP but
> am not sure how?
> someone said I need a license is this true?
> you can email me: luklaupdat
hi all
i have a new MX480 with MPC-3D-16XGE-SFPP and I am trying to enable BGP but
am not sure how?
someone said I need a license is this true?
you can email me: luklaupdates(AT, AT, FOR
SPAM)gmail.com
thanks
___
juniper-nsp mailing list juniper-nsp@puc
8 matches
Mail list logo