Hi Stephen,
I am not a J-Series expert but you might want to check into licensing
issues. I understand that you need J-Flow license to run cflowd after
JUNOS 8.5.
Thanks,
Nilesh.
Stephen Fulton wrote:
Excellent point:
s...@router> show services accounting flow
error: Sampling does not have
Excellent point:
s...@router> show services accounting flow
error: Sampling does not have flow accounting configured
Again, this worked in 8.5, but not 9.2 -- there have not been any changes apart
from those may to the rate of sampling in forwarding-options->sampling. I've
looked at accountin
On Sat, Apr 18, 2009 at 1:25 PM, Stephen Fulton wrote:
> Stefan,
>
> Thanks for the tip. I do have NTP set up and running correctly.
>
> -- Stephen
When you run a 'show services accounting flow' or 'show services
accounting status/usage' does it appear that accounting is even
enabled?
--
Stefa
Stefan,
Thanks for the tip. I do have NTP set up and running correctly.
-- Stephen
Stefan Fouant wrote:
Make sure you have a proper NTP source. It's not documented but
somewhere in JUNOS 9.x they started requiring NTP to be setup in order
to make sure your flows had accurate timestamps.
On
Make sure you have a proper NTP source. It's not documented but
somewhere in JUNOS 9.x they started requiring NTP to be setup in order
to make sure your flows had accurate timestamps.
On 4/18/09, Stephen Fulton wrote:
> Greetings,
>
> I recently upgraded a J-series 6350 from 8.4 to 9.2, and it a
Greetings,
I recently upgraded a J-series 6350 from 8.4 to 9.2, and it appears that it is
no longer exporting, or properly exporting, version 5 flows. I'm at a loss,
since the documentation on Juniper's site is simply wrong for the J-series --
ie. commands listed do not exist. Here's a redac
6 matches
Mail list logo