> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Samit
> Sent: 21 October 2008 06:32
> To: juniper-nsp@puck.nether.net
> Subject: [j-nsp] Juniper M7i, Junos9.2 w/ PE-1GE-SX-B ,802.1Q
> inter vlan routing
>
> Hi,
>
&
Samit,
Try this document:
http://www.juniper.net/techpubs/software/junos/junos92/swconfig-network-interfaces/configuring-ethernet-interfaces.html#id-12156738
http://www.juniper.net/techpubs/software/junos/junos92/swconfig-network-interfaces/configuring-ethernet-physical-interface-properties.html
On Tuesday 21 October 2008 13:31:37 Samit wrote:
> We are getting couple of used M7i with Junos 9.2 w/
> PE-1GE-SX-B next week. I have a very simple
> questiondue to lack of junos knowledge, The M7i Gig
> interface will be connected with Catalyst 3400 802.1Q
> trunk port and I need to do a int
Hi Samit,
Configure the link as Layer two trunk and allow relevant VLAN.
You are done.
Start with:
http://www.juniper.net/techpubs/software/erx/junose52/swconfig-physical/html/ethernet-config8.html#274361
HTH,
Mustafa
On Tue, Oct 21, 2008 at 11:31 AM, Samit <[EMAIL PROTECTED]> wrote:
> Hi,
>
> I
Hi,
I am quite elated that we are now moving into Juniper from Cisco
(Npe-g1) for our border gateway deployment w/ 2 full bgp feed.
We are getting couple of used M7i with Junos 9.2 w/ PE-1GE-SX-B next
week. I have a very simple questiondue to lack of junos knowledge,
The M7i Gig interface wil
5 matches
Mail list logo