On Thu, Dec 29, 2011 at 12:40 AM, Doug Hanks wrote:
> You can actually configure 50G worth of tunnel-services on the MX80. 10g
> worth on FPC0 and 40G worth on FPC1. You need to be running Junos 10.2R4.
> All of this without losing any revenue ports, but at the cost of
> over-subscribing them.
You can actually configure 50G worth of tunnel-services on the MX80. 10g
worth on FPC0 and 40G worth on FPC1. You need to be running Junos 10.2R4.
All of this without losing any revenue ports, but at the cost of
over-subscribing them.
Thank you,
--
Doug Hanks - JNCIE-ENT #213, JNCIE-SP #875
I had no problem enabling 10g worth of tunnel-services on a 3D 20x
1GE(LAN) SFP MIC, but this was on a MX960. In terms of losing a 10G port,
that's only true for the first generation DPC card. With Trio/MPC that is
no longer the case and you can retain all of your revenue ports, but at
the loss o
> > On the 1G MICs there is extra capacity to handle an lt interface, so
> > you can configure under chassis, assuming a 20x1G MIC in MIC slot 0:
> >
> > fpc 1 {
> > pic 1 {
> > tunnel-services {
> > bandwidth 1g;
> > }
> > }
> > }
> >
>
> I understood that as MIC ha
On Wed, Dec 28, 2011 at 10:40 AM, wrote:
> On the 1G MICs there is extra capacity to handle an lt interface, so
> you can configure under chassis, assuming a 20x1G MIC in MIC slot 0:
>
> fpc 1 {
> pic 1 {
> tunnel-services {
> bandwidth 1g;
> }
> }
> }
>
I understo
> Are lt- intefaces are supported on MX80 ?
Yes.
> I have MX80 + 2 20x1G SFP
> linecards. I would like to setup logical router and provide IP
> connectivity between logical router and global instance using lt-
> interface. If it's supported then what number of interface I should
> use and is exis
Are lt- intefaces are supported on MX80 ? I have MX80 + 2 20x1G SFP
linecards. I would like to setup logical router and provide IP
connectivity between logical router and global instance using lt-
interface. If it's supported then what number of interface I should
use and is exist any bandwidth lim
7 matches
Mail list logo