--- Begin Message ---
I found this:
QFX1 Series switches do not support the shaping-rate statement.
However, you can configure the transmit-rate exact option to prevent a
queue from consuming more bandwidth than you want the queue to consume.
here:
https://www.juniper.net/documentation/en
Hi!
QFX10008 w/ JUNOS 15.1X53 and 18.4R2.3
Thanks!
On Fri, Feb 21, 2020 at 4:53 PM Timur Maryin wrote:
> What is exact model you have?
> And junos version?
>
>
> On 20-Feb-20 13:43, Chen Jiang wrote:
> > Hi! Experts
> >
> > Sorry for disturbing, we found the "set class-of-service interfaces xx
--- Begin Message ---
What is exact model you have?
And junos version?
On 20-Feb-20 13:43, Chen Jiang wrote:
Hi! Experts
Sorry for disturbing, we found the "set class-of-service interfaces xxx
shaping-rate" is missing in QFX platform, is there any other method could
do port shaping ?
Thanks f
Try configuring with "forwarding-class-sets". It looks the same as CoS on
QFX5K:
set class-of-service interfaces et-0/0/0 forwarding-class-set TEST
output-traffic-control-profile TEST
On Fri, Feb 21, 2020 at 5:22 PM Saku Ytti wrote:
> On Fri, 21 Feb 2020 at 02:48, Chen Jiang wrote:
>
> > I ha
On Fri, 21 Feb 2020 at 02:48, Chen Jiang wrote:
> I have tried you advice but there is no "output-traffic-control-profile"
> under "class-of-service interfaces et-x/x/x" in QFX10K. different from other
> Juniper gears, QFX COS configuration is very weired.
This works in PTX10k and PTX1k which
Hi! Saku
I have tried you advice but there is no "output-traffic-control-profile"
under "class-of-service interfaces et-x/x/x" in QFX10K. different from
other Juniper gears, QFX COS configuration is very weired.
BR!
Chen Jiang
On Thu, Feb 20, 2020 at 10:03 PM Saku Ytti wrote:
> Hey James,
>
>
Hi! Chris
Yes, all my business traffic is BE, but there is also BGP in NC queue, I am
afraid only shaping BE traffic to maxium link capacity will starve NC queue
and cause BGP broken.
Thanks for your help.
BR!
Chen Jiang
On Fri, Feb 21, 2020 at 7:03 AM Chris Kawchuk wrote:
> Assuming all you
Assuming all your traffic is BE, (which is how I generally setup all my QFXes
and ensure I never oversubscribe) and after adjusting all the ingress and
egress shared-buffers from the defaults, (and just go down to a few HQ queues),
you can create a scheduler with a shaper on the BE queue, + sche
Hey James,
PE chip certainly does support egress shaping and have QoS inside the
subrate (HQoS).
Try this:
set class-of-service traffic-control-profiles tcp-5G scheduler-map
YOUR_SCHEDULER
set class-of-service traffic-control-profiles tcp-5G shaping-rate 5g
set class-of-service interfaces et-0/
Hi! Experts
Sorry for disturbing, we found the "set class-of-service interfaces xxx
shaping-rate" is missing in QFX platform, is there any other method could
do port shaping ?
Thanks for your help.
--
BR!
James Chen
___
juniper-nsp maili
10 matches
Mail list logo