Re: [j-nsp] Questions about EX4550 switches

2016-11-22 Thread Mark Tinka
On 16/Nov/16 16:42, Valentini, Lucio wrote: > The 12.3R12 is recommended also for EX2200 and EX4200; always follow > Juniper´s recommendations! The table of recommended versions is available on > the website juniper.net > Ref.: > https://kb.juniper.net/InfoCenter/index?page=content&id=KB21476

Re: [j-nsp] Questions about EX4550 switches

2016-11-22 Thread Mark Tinka
On 16/Nov/16 17:12, Doug McIntyre wrote: > > BUT, I know on this platform (EX4550), that certain interface cards require > newer code in the 13.2 series of code releases. So, make sure you check > out the requirements of all the modules installed in the switch. I know > the 40GB expansion module

Re: [j-nsp] Questions about EX4550 switches

2016-11-22 Thread Doug McIntyre
On Tue, Nov 22, 2016 at 08:22:04AM +0200, Mark Tinka wrote: > On 16/Nov/16 17:12, Doug McIntyre wrote: > > BUT, I know on this platform (EX4550), that certain interface cards require > > newer code in the 13.2 series of code releases. So, make sure you check > > out the requirements of all the modu

Re: [j-nsp] Questions about EX4550 switches

2016-11-16 Thread Aaron
I use dual ex4550's in my data centers and they are virtual chassis together and they function very dependably ...I forget I have them in the network :) 12.2R4.5 - Aaron ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net

Re: [j-nsp] Questions about EX4550 switches

2016-11-16 Thread Doug McIntyre
On Wed, Nov 16, 2016 at 03:02:04PM +0800, Rod Bio wrote: > 1. Configuring firewall gives me "Warning: statement ignored: > unsupported platform (ex4550-32f)" when including "except". I'm trying > to filter ALL traffic except from some IP but except is not working. Indeed, filters tend to be a gr

[j-nsp] Questions about EX4550 switches

2016-11-16 Thread Valentini, Lucio
Hi there, To your questions, I´ve been using EX series switchs for over 2 years now: 1. Configuring firewall gives me "Warning: statement ignored: unsupported platform (ex4550-32f)" when including "except". I'm trying to filter ALL traffic except from some IP but except is not working. Ind

[j-nsp] Questions about EX4550 switches

2016-11-15 Thread Rod Bio
Good day everyone. Just recently subscribed so I'm sorry if I break any rule here. But I'd like to post some questions about EX4550 we recently got. Our network mostly run cisco but with a couple of old Juniper M5 and I have experience but I am not really familiar with Juniper. So I'm running