1 1:15 AM
>> To: juniper-nsp@puck.nether.net
>> Subject: Re: [j-nsp] RES: Trying to get OSPF to work across IPsec for
>> Redundancy
>>
>> Actually...
>> OSPF will work across an ipsec tunnel. Unfortunately, last time I
>> checked, it wouldn't work acros
> -Original Message-
> From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-
> boun...@puck.nether.net] On Behalf Of OBrien, Will
> Sent: Friday, April 29, 2011 1:15 AM
> To: juniper-nsp@puck.nether.net
> Subject: Re: [j-nsp] RES: Trying to get OSPF to wor
Actually...
OSPF will work across an ipsec tunnel. Unfortunately, last time I checked, it
wouldn't work across a tunnel that's terminated within a routing instance on a
srx. The issue was confirmed by JTAC.
We haven't tried it on 10.4 yet, but it's a known issue with older code.
OSPF just won't
sorry I meant IPSEC doesn't carry multicast. OSPF technically doesn't
"carry" anything.
On Thu, Apr 28, 2011 at 11:28 PM, Keegan Holley
wrote:
> I don't think OSPF carries multicast. I know cisco routers have a neighbor
> statement that will force it to unicast hello's I've never tried it on a
: Trying to get OSPF to work across IPsec for Redundancy
I don't think OSPF carries multicast. I know cisco routers have a neighbor
statement that will force it to unicast hello's I've never tried it on a
juniper. I think if you do GRE over IPSEC (not to be confused with IPSEC
over GRE
I don't think OSPF carries multicast. I know cisco routers have a neighbor
statement that will force it to unicast hello's I've never tried it on a
juniper. I think if you do GRE over IPSEC (not to be confused with IPSEC
over GRE) the multicast will work as well. It depends on your endpoints
thou
> Hello All:
>
> I'm trying to get OSPF up over IPsec. We have two IPsec tunnels, a
> primary and a secondary that our spoke router can use. We want to
have
> the spoke router run OSPF across both and then in case of a failure of
> the primary hub router (where the primary IPsec tunnel terminates
7 matches
Mail list logo
