Re: [j-nsp] Setting PE-4FE-TX port to 10m gives 'Illegal media change: invalid speed'

Hi, http://www.juniper.net/techpubs/software/junos/junos83/swconfig83-network-interfaces/html/interfaces-ethernet-config2.html The statement speed (10m | 100m) applies only to the management Ethernet interface (fxp0) and to the Fast Ethernet 12-port and 48-port Physical Interface Cards (PICs). T

Re: [j-nsp] Setting PE-4FE-TX port to 10m gives 'Illegal media change: invalid speed'

Hi Ras I believe this kind of card is able to run only at 100Mbps full or half. see: http://www.juniper.net/techpubs/hardware/m7i/m7i-pic/frameset.html Saying that the PE-12FE-TX is the only able to run at 10M or 100M I have already had the same problem as you. If you have some M7i with integra

Re: [j-nsp] Setting PE-4FE-TX port to 10m gives 'Illegal media change: invalid speed'

Hi, What's your platform and JUNOS? Erdem On 9/5/07, Ras <[EMAIL PROTECTED]> wrote: > I've just tried to set a port on an PE-4FE-TX to 10m (set interfaces > fe-0/0/1 speed 10m). This works fine on our PE-12FE-TX and the 'commit > check' says all is well, but when I commit I get: > > /kernel: %KE

[j-nsp] Setting PE-4FE-TX port to 10m gives 'Illegal media change: invalid speed'

I've just tried to set a port on an PE-4FE-TX to 10m (set interfaces fe-0/0/1 speed 10m). This works fine on our PE-12FE-TX and the 'commit check' says all is well, but when I commit I get: /kernel: %KERN-2: fe-0/0/1: Illegal media change: invalid speed Are these 100m only ports? If not, what els