Hi,
Try shutting down the vlan-range with something like the following statement:
(config-if)#vlan bulk-config test shutdown vlan-range 567 667
also see:
http://www.juniper.net/techpubs/software/erx/junose73/swconfig-link/html/dynamic-interfaces-bulk-config6.html
Regards,
Junaid
On Fri, Jan 1
: Motoki Seta
Subject: Re: [j-nsp] dymanic interfaces junose
To: juniper-nsp@puck.nether.net
Date: Monday, December 22, 2008, 5:19 AM
Hello
Maybe...
The reason why the interface cannot be deleted is that "Dormant"
interface remains.
>#show vlan
Hello
Maybe...
The reason why the interface cannot be deleted is that "Dormant" interface
remains.
>#show vlan subinterface
> Svlan Vlan Ether
> Interface Status MTU IdId type Type
> --- --
Hello
Maybe...
The reason why the interface cannot be deleted is that "Dormant" interface
remains.
>#show vlan subinterface
> Svlan Vlan Ether
> Interface Status MTU IdId type Type
> --- --
Usually you need wait a few minutes until all interfaces are deleted. Then
the right command to
remove the bulk config is:
no vlan bulk-config "test"
HTH
./diogo -montagner
On Fri, Jan 18, 2008 at 10:10 AM, SunnyDay wrote:
> Hello
> In junose ihave this configuration on an interface:
>
> i/nt
That does not appear to be a JunOS interface config but none the less,
in your situation, I would suggest deleting the entire interface
config and starting over.
~Chris
On Fri, Jan 18, 2008 at 05:10, SunnyDay wrote:
> Hello
> In junose ihave this configuration on an interface:
>
> i/nterface giga
Hello
In junose ihave this configuration on an interface:
i/nterface gigabitEthernet 1/0/1
shutdown
mtu 1522
encapsulation vlan
vlan bulk-config "test"
profile vlan bulk-config "test" "test pro"
vlan bulk-config "test" vlan-range 567 667
/my problem is that the interface is shutdown but i still
7 matches
Mail list logo