Thank you, this fixed the issue /
On Wed, Mar 11, 2009 at 12:02 AM, Arda Balkanay wrote:
> You have configured interface fe-5/2/2.100 but used fe-5/2/2.600 at
> l2circuit that's why you get " Mar 10 16:52:06.832065 [l2ckt_vc_update]
> Failure to create/update vc 2.2.2.2:999 --> interface not pres
You have configured interface fe-5/2/2.100 but used fe-5/2/2.600 at
l2circuit that's why you get " Mar 10 16:52:06.832065 [l2ckt_vc_update]
Failure to create/update vc 2.2.2.2:999 --> interface not present" error.
It says "interface does not exist" ...
On Wed, Mar 11, 2009 at 2:14 AM, Dinesh wr
On Wednesday 11 March 2009 01:41:58 pm Amjad Ul Hasnain
Qasmi wrote:
> Define "family ccc" under unit 100.
That shouldn't be necessary. 'encapsulation vlan-ccc' should
be sufficient, assuming other logical units are carrying IP
(inet|inet6) directly as well.
Cheers,
Mark.
signature.asc
Des
Define "family ccc" under unit 100.
-Original Message-
From: juniper-nsp-boun...@puck.nether.net
[mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Dinesh
Sent: Wednesday, March 11, 2009 5:15 AM
To: Juniper Puck
Subject: Re: [j-nsp] l2-circuit from Juniper m40 to a c
On Wednesday 11 March 2009 08:14:42 am Dinesh wrote:
> unit 100 {
> encapsulation vlan-ccc;
> vlan-id 600;
> }
> }
Mismatched logical unit between interface and protocol
configurations. Sync those and you should be good.
Cheers,
Mark.
signature.asc
On Wednesday 11 March 2009 07:57:49 am Dinesh wrote:
> Hi i am trying to bring up a l2-circuit from Juniper m40
> to a cisco... i see cisco fine... but i get this error on
> m40 ...
What does your interface configuration look like on both
sides?
Cheers,
Mark.
signature.asc
Description: This
I think its misconfig.
You can configured unit 100 under fe-5/2/2 but in L2CKT you have
configured unit 600.
Thanks,
Nilesh
Dinesh wrote:
just attaching the interface config..
fe-5/2/2 {
vlan-tagging;
encapsulation vlan-ccc;
fastether-options {
loopback;
just attaching the interface config..
fe-5/2/2 {
vlan-tagging;
encapsulation vlan-ccc;
fastether-options {
loopback;
}
unit 100 {
encapsulation vlan-ccc;
vlan-id 600;
}
}
On Tue, Mar 10, 2009 at 4:57 PM, Dine
Hi i am trying to bring up a l2-circuit from Juniper m40 to a cisco... i see
cisco fine... but i get this error on m40 ...
neighbor 2.2.2.2 {
interface fe-5/2/2.600 {
virtual-circuit-id 999;
}
}
10 16:52:06.831491 [l2ckt_intf_change_process] Change processing for intf
fe-5/2/2.
9 matches
Mail list logo