waqas Mohammad wrote:
Hi,
I am facing problem with installation of Netscreen VPN client 10.7.7 on
windows Vista, dose it works on Vista or it is only design for XP?
10.8.3 build 6 works on Vista. Maybe you should upgrade.
___
juniper-nsp mailin
Hi,
I am facing problem with installation of Netscreen VPN client 10.7.7 on
windows Vista, dose it works on Vista or it is only design for XP?
Thanks
Waqas.
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/li
ECTED]
> Sent: Saturday, May 17, 2008 6:58 PM
> To: sunnyday
> Cc: Juniper-Nsp; [EMAIL PROTECTED]
> Subject: Re: [j-nsp] Netscreen vpn
>
> There is just not enough information supplied to determine the
> problem. Is the tunnel interface bound to the Trust zone, or the
> Un
iginal Message-
> From: Stefan Fouant [mailto:[EMAIL PROTECTED]
> Sent: Saturday, May 17, 2008 6:58 PM
> To: sunnyday
> Cc: Juniper-Nsp; [EMAIL PROTECTED]
> Subject: Re: [j-nsp] Netscreen vpn
>
> There is just not enough information supplied to determine the
> problem. Is th
And another question how can I tell to which zone the tunnel interface is
bound?
-Original Message-
From: Stefan Fouant [mailto:[EMAIL PROTECTED]
Sent: Saturday, May 17, 2008 6:58 PM
To: sunnyday
Cc: Juniper-Nsp; [EMAIL PROTECTED]
Subject: Re: [j-nsp] Netscreen vpn
There is just not
-
From: Stefan Fouant [mailto:[EMAIL PROTECTED]
Sent: Saturday, May 17, 2008 6:58 PM
To: sunnyday
Cc: Juniper-Nsp; [EMAIL PROTECTED]
Subject: Re: [j-nsp] Netscreen vpn
There is just not enough information supplied to determine the
problem. Is the tunnel interface bound to the Trust zone, or the
There is just not enough information supplied to determine the
problem. Is the tunnel interface bound to the Trust zone, or the
Untrust zone? If it's bound to the Trust zone and you haven't
explicity blocked intrazone traffic then you don't need a policy. Are
you using any other Virtual-Routers
Hello I have configured a dialup vpn and successfully created the tunnel and
received ip address but I cannot manage to ping the netscreen`s
Trust interface. The ip address the vpn has is 10.250.250.1 and the trust
interface is 192.168.10.1. I tried with static routes and policies
With no r
On Wed, 2008-05-14 at 16:12 +0300, M.Mihailidis wrote:
> Anyone knows why is this??
on the general tab, change the mode-config method to push instead of the
default pull.
-Daniel.
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.ne
Is there another free vpn client that I can use except netscreen remote?
-Original Message-
From: Stefan Fouant [mailto:[EMAIL PROTECTED]
Sent: Wednesday, May 14, 2008 5:34 PM
To: M.Mihailidis
Cc: Juniper-Nsp; [EMAIL PROTECTED]
Subject: Re: [j-nsp] netscreen Vpn
IIRC, XAuth has to take
IIRC, XAuth has to take place *after* Phase 1 establishment but *prior
to* Phase 2 negotiations. Therefore I believe you are seeing this
message because the XAuth authentication needs to be completed before
Phase 2 can begin.
If you only saw the error once it just means the XAuth packet wasn't
re
Hello im to set up an ipsec vpn with 5gt using Shrew Soft VPN Client from my
pc
I have setup correctly the 5gt and during the dial I get the message:
KE<85.72.37.175>: XAuth login expired and was terminated for username
at <10.32.32.10>.2008-05-14
16:16:49infoIKE: XAuth login was abor
12 matches
Mail list logo
