Dear Moderator, I tried many times to unsubscribe but always failed although with correct password (never receive email confirmation). Please help to unsubscribe me from this mailing list.
Thank you.. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Monika M Sent: Thursday, 14 June, 2007 6:19 PM To: juniper-nsp@puck.nether.net; [EMAIL PROTECTED] Subject: [j-nsp] VPLS with 2 interfaces on the same router There was a discussion on this forum with the above subject concluding the below point. *The value of "site-identifier" must be equal or less then the value of " site-range". With your current configuration if you configure this VPLS service on another router the traffic won't be forwarded over the MPLS cloud. * But as per Juniper document, the site range specifies the total number of sites in the VPLS. If this is the total number of sites, why should it be greatere than the site id? Assume we have 10 PEs in a instance. We will configure site range as 10 in all the PEs. The site id of individual PEs can be in any range. Could be 50-60, 60-70..... I am not able to get the dependencies between these two configuration. Had never come across in Juniper document also such a dependancy. Could you please explain the reason behind this condition specified in your mail? TIA, Monika ** _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp