Re: [PATCH net-next v9] selftests/vsock: add initial vmtest.sh for vsock
On Tue, May 27, 2025 at 05:36:54PM -0700, Bobby Eshleman wrote: This commit introduces a new vmtest.sh runner for vsock. It uses virtme-ng/qemu to run tests in a VM. The tests validate G2H, H2G, and loopback. The testing tools from tools/testing/vsock/ are reused. Currently, only vsock_test is used. VMCI and hyperv support is included in the config file to be built with the -b option, though not used in the tests. Only tested on x86. To run: $ make -C tools/testing/selftests TARGETS=vsock $ tools/testing/selftests/vsock/vmtest.sh or $ make -C tools/testing/selftests TARGETS=vsock run_tests Example runs (after make -C tools/testing/selftests TARGETS=vsock): $ ./tools/testing/selftests/vsock/vmtest.sh 1..3 ok 0 vm_server_host_client ok 1 vm_client_host_server ok 2 vm_loopback SUMMARY: PASS=3 SKIP=0 FAIL=0 Log: /tmp/vsock_vmtest_m7DI.log $ ./tools/testing/selftests/vsock/vmtest.sh vm_loopback 1..1 ok 0 vm_loopback SUMMARY: PASS=1 SKIP=0 FAIL=0 Log: /tmp/vsock_vmtest_a1IO.log $ mkdir -p ~/scratch $ make -C tools/testing/selftests install TARGETS=vsock INSTALL_PATH=~/scratch [... omitted ...] $ cd ~/scratch $ ./run_kselftest.sh TAP version 13 1..1 # timeout set to 300 # selftests: vsock: vmtest.sh # 1..3 # ok 0 vm_server_host_client # ok 1 vm_client_host_server # ok 2 vm_loopback # SUMMARY: PASS=3 SKIP=0 FAIL=0 # Log: /tmp/vsock_vmtest_svEl.log ok 1 selftests: vsock: vmtest.sh Future work can include vsock_diag_test. Because vsock requires a VM to test anything other than loopback, this patch adds vmtest.sh as a kselftest itself. This is different than other systems that have a "vmtest.sh", where it is used as a utility script to spin up a VM to run the selftests as a guest (but isn't hooked into kselftest). Signed-off-by: Bobby Eshleman --- Changes in v9: - make kselftest build target depend on tools/testing/vsock sources (Stefano) - add check_vng() for vng version checking (Stefano) - add virtme_ssh_channel=tcp to kernel cmdline (Stefano) - Link to v8: https://lore.kernel.org/r/[email protected] Cool, this Changes in v8: - remove NIPA comment from commit msg - remove tap_* functions and TAP_PREFIX - add -b for building kernel - Link to v7: https://lore.kernel.org/r/[email protected] Changes in v7: - fix exit code bug when ran is kselftest: use cnt_total instead of KSFT_NUM_TESTS - updated commit message with updated output - updated commit message with commands for installing/running as kselftest - Link to v6: https://lore.kernel.org/r/[email protected] Changes in v6: - add make cmd in commit message in vmtest.sh example (Stefano) - check nonzero size of QEMU_PIDFILE using -s conditional (Stefano) - display log file path after tests so it is easier to find amongst other random names - cleanup qemu pidfile if qemu is unable to remove it - make oops/warning failures more obvious with 'FAIL' prefix in log (simply saying 'detected' wasn't clear enough to identify failing condition) - Link to v5: https://lore.kernel.org/r/[email protected] Changes in v5: - make log file a tmpfile (Paolo) - make sure both default and user defined QEMU gets handled by the dependency check (Paolo) - increased VM boot up timeout from 1m to 3m for slow hosts (Paolo) - rename vm_setup -> vm_start (Paolo) - derive wait_for_listener from selftests/net/net_helper.sh to removes ss usage - Remove unused 'unset IFS' line (Paolo) - leave space after variable declarations (Paolo) - make QEMU_PIDFILE a tmp file (Paolo) - make everything readonly that is only read (Paolo) - source ktap_helpers.sh for KSFT_PASS and friends (Paolo) - don't check for timeout util (Paolo) - add missing usage string for -q qemu arg - add tap prefix to SUMMARY line since it isn't part of TAP protocol - exit with the correct status code based on failure/pass counts - Link to v4: https://lore.kernel.org/r/[email protected] Changes in v4: - do not use special tab delimiter for help string parsing (Stefano + Paolo) - fix paths for when installing kselftest and running out-of-tree (Paolo) - change vng to using running kernel instead of compiled kernel (Paolo) - use multi-line string for QEMU_OPTS (Stefano) - change timeout to 300s (Paolo) - skip if tools are not found and use kselftests status codes (Paolo) - remove build from vmtest.sh (Paolo) - change -> SSH_HOST_PORT (Stefano) - add tap-format output - add vmtest.log to gitignore - check for vsock_test binary and remind user to build it if missing - create a proper build in makefile - style fixes - add ssh, timeout, and pkill to dependency check, just in case - fix numerical comparison in conditionals - check qemu pidfile exists before proceeding (avoid wasting time waiting for ssh) - fix tracking of pass/fail bug - fix stderr redirection bug - Link to v3: https://lore.kernel.org/r/20250428-vsock-vmtest-v3-1-181af61
Re: [PATCH net-next v9] selftests/vsock: add initial vmtest.sh for vsock
On Tue, 27 May 2025 17:36:54 -0700 Bobby Eshleman wrote: > This commit introduces a new vmtest.sh runner for vsock. ## Form letter - net-next-closed The merge window for v6.16 has begun and therefore net-next is closed for new drivers, features, code refactoring and optimizations. Please repost when net-next reopens after June 9th. RFC patches sent for review only are obviously welcome at any time. See: https://www.kernel.org/doc/html/next/process/maintainer-netdev.html#development-cycle -- pw-bot: defer pv-bot: closed
[PATCH net-next v9] selftests/vsock: add initial vmtest.sh for vsock
This commit introduces a new vmtest.sh runner for vsock. It uses virtme-ng/qemu to run tests in a VM. The tests validate G2H, H2G, and loopback. The testing tools from tools/testing/vsock/ are reused. Currently, only vsock_test is used. VMCI and hyperv support is included in the config file to be built with the -b option, though not used in the tests. Only tested on x86. To run: $ make -C tools/testing/selftests TARGETS=vsock $ tools/testing/selftests/vsock/vmtest.sh or $ make -C tools/testing/selftests TARGETS=vsock run_tests Example runs (after make -C tools/testing/selftests TARGETS=vsock): $ ./tools/testing/selftests/vsock/vmtest.sh 1..3 ok 0 vm_server_host_client ok 1 vm_client_host_server ok 2 vm_loopback SUMMARY: PASS=3 SKIP=0 FAIL=0 Log: /tmp/vsock_vmtest_m7DI.log $ ./tools/testing/selftests/vsock/vmtest.sh vm_loopback 1..1 ok 0 vm_loopback SUMMARY: PASS=1 SKIP=0 FAIL=0 Log: /tmp/vsock_vmtest_a1IO.log $ mkdir -p ~/scratch $ make -C tools/testing/selftests install TARGETS=vsock INSTALL_PATH=~/scratch [... omitted ...] $ cd ~/scratch $ ./run_kselftest.sh TAP version 13 1..1 # timeout set to 300 # selftests: vsock: vmtest.sh # 1..3 # ok 0 vm_server_host_client # ok 1 vm_client_host_server # ok 2 vm_loopback # SUMMARY: PASS=3 SKIP=0 FAIL=0 # Log: /tmp/vsock_vmtest_svEl.log ok 1 selftests: vsock: vmtest.sh Future work can include vsock_diag_test. Because vsock requires a VM to test anything other than loopback, this patch adds vmtest.sh as a kselftest itself. This is different than other systems that have a "vmtest.sh", where it is used as a utility script to spin up a VM to run the selftests as a guest (but isn't hooked into kselftest). Signed-off-by: Bobby Eshleman --- Changes in v9: - make kselftest build target depend on tools/testing/vsock sources (Stefano) - add check_vng() for vng version checking (Stefano) - add virtme_ssh_channel=tcp to kernel cmdline (Stefano) - Link to v8: https://lore.kernel.org/r/[email protected] Changes in v8: - remove NIPA comment from commit msg - remove tap_* functions and TAP_PREFIX - add -b for building kernel - Link to v7: https://lore.kernel.org/r/[email protected] Changes in v7: - fix exit code bug when ran is kselftest: use cnt_total instead of KSFT_NUM_TESTS - updated commit message with updated output - updated commit message with commands for installing/running as kselftest - Link to v6: https://lore.kernel.org/r/[email protected] Changes in v6: - add make cmd in commit message in vmtest.sh example (Stefano) - check nonzero size of QEMU_PIDFILE using -s conditional (Stefano) - display log file path after tests so it is easier to find amongst other random names - cleanup qemu pidfile if qemu is unable to remove it - make oops/warning failures more obvious with 'FAIL' prefix in log (simply saying 'detected' wasn't clear enough to identify failing condition) - Link to v5: https://lore.kernel.org/r/[email protected] Changes in v5: - make log file a tmpfile (Paolo) - make sure both default and user defined QEMU gets handled by the dependency check (Paolo) - increased VM boot up timeout from 1m to 3m for slow hosts (Paolo) - rename vm_setup -> vm_start (Paolo) - derive wait_for_listener from selftests/net/net_helper.sh to removes ss usage - Remove unused 'unset IFS' line (Paolo) - leave space after variable declarations (Paolo) - make QEMU_PIDFILE a tmp file (Paolo) - make everything readonly that is only read (Paolo) - source ktap_helpers.sh for KSFT_PASS and friends (Paolo) - don't check for timeout util (Paolo) - add missing usage string for -q qemu arg - add tap prefix to SUMMARY line since it isn't part of TAP protocol - exit with the correct status code based on failure/pass counts - Link to v4: https://lore.kernel.org/r/[email protected] Changes in v4: - do not use special tab delimiter for help string parsing (Stefano + Paolo) - fix paths for when installing kselftest and running out-of-tree (Paolo) - change vng to using running kernel instead of compiled kernel (Paolo) - use multi-line string for QEMU_OPTS (Stefano) - change timeout to 300s (Paolo) - skip if tools are not found and use kselftests status codes (Paolo) - remove build from vmtest.sh (Paolo) - change -> SSH_HOST_PORT (Stefano) - add tap-format output - add vmtest.log to gitignore - check for vsock_test binary and remind user to build it if missing - create a proper build in makefile - style fixes - add ssh, timeout, and pkill to dependency check, just in case - fix numerical comparison in conditionals - check qemu pidfile exists before proceeding (avoid wasting time waiting for ssh) - fix tracking of pass/fail bug - fix stderr redirection bug - Link to v3: https://lore.kernel.org/r/[email protected] Changes in v3: - use common conditional syntax
