On Fri, Jul 20, 2018 at 3:19 PM Biju Das wrote:
> Adding pinctrl support for scif1 interface.
>
> Signed-off-by: Biju Das
> Reviewed-by: Chris Paterson
Reviewed-by: Geert Uytterhoeven
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia3
On Fri, Jul 20, 2018 at 3:15 PM Biju Das wrote:
> Define the generic R8A77470 part of the PFC device node.
>
> Signed-off-by: Biju Das
> Reviewed-by: Fabrizio Castro
Reviewed-by: Geert Uytterhoeven
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Li
On Fri, Jul 20, 2018 at 3:12 PM Biju Das wrote:
> Replace the hardcoded power domain indices by R8A77470_PD_* symbols.
>
> Signed-off-by: Biju Das
> Reviewed-by: Chris Paterson
Reviewed-by: Geert Uytterhoeven
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's
On Thu, Jun 28, 2018 at 10:45:38PM +0200, Wolfram Sang wrote:
> On Gen3, we can only do RXDMA once per transfer reliably. For that, we
> must reset the device, then we can have RXDMA once. This patch
> implements this. When there is no reset controller or the reset fails,
> RXDMA will be blocked co
On Fri, Jun 29, 2018 at 09:54:04AM +0200, Wolfram Sang wrote:
>
> > > + /* Gen3 needs a reset before allowing RXDMA once */
> > > + if (priv->devtype == I2C_RCAR_GEN3) {
> >
> > So on R-Car Gen3 the device is always reset, even if no reads will be done?
> > Or is that something you ca
Hi Olof,
On Mon, Jul 23, 2018 at 6:22 PM Olof Johansson wrote:
> On Mon, Jul 23, 2018 at 2:11 AM, Geert Uytterhoeven
> wrote:
> >> > * Set CONFIG_LOCALVERSION to shmobile_defconfig
> >> >
> >> > This follows what appears to be common practice in defconfigs
> >> > and allows easier management
On Mon, Jul 23, 2018 at 2:11 AM, Geert Uytterhoeven
wrote:
> Hi Olof,
>
> On Sun, Jul 22, 2018 at 12:27 AM Olof Johansson wrote:
>> On Fri, Jul 20, 2018 at 02:03:54PM +0200, Simon Horman wrote:
>> > Please consider these Renesas ARM based SoC defconfig updates for v4.19.
>
>> > * Set CONFIG_LOCAL
On Wed, Jul 18, 2018 at 04:47:56AM +0900, Yoshihiro Kaneko wrote:
> This series adds sound support for r8a77965 (R-Car M3-N).
> This series is based on the devel branch of Simon Horman's renesas tree.
>
> Hiroyuki Yokoyama (1):
> ASoC: rsnd: Document R-Car M3-N support
>
> Takeshi Kihara (6):
>
On Sat, Jul 21, 2018 at 01:14:49PM +0200, Wolfram Sang wrote:
> This patch adds SDHI support for the R8A77990 SoC (R-Car E3). No driver
> changes
> needed for anything except HS400 which we will enable separately later.
No driver update should be required for HS400, see below.
> Signed-off-by: W
On 07/23/2018 07:08 PM, Simon Horman wrote:
>> Describe RWDT in the R8A77980 SoC device tree.
>>
>> Enable RWDT on the Condor and V3H Starter Kit boards.
>>
>> Based on the original (and large) patch by Vladimir Barinov.
>>
>> Signed-off-by: Vladimir Barinov
>> Signed-off-by: Sergei Shtylyov
>>
On Fri, Jul 20, 2018 at 10:21:45PM +0300, Sergei Shtylyov wrote:
> Describe RWDT in the R8A77980 SoC device tree.
>
> Enable RWDT on the Condor and V3H Starter Kit boards.
>
> Based on the original (and large) patch by Vladimir Barinov.
>
> Signed-off-by: Vladimir Barinov
> Signed-off-by: Serge
On Fri, Jul 20, 2018 at 02:13:31PM +0100, Biju Das wrote:
> Adding pinctrl support for scif1 interface.
>
> Signed-off-by: Biju Das
> Reviewed-by: Chris Paterson
Thanks,
This looks fine to me but I will wait to see if there are other reviews
before applying.
Reviewed-by: Simon Horman
On Fri, Jul 20, 2018 at 02:09:46PM +0100, Biju Das wrote:
> Define the generic R8A77470 part of the PFC device node.
>
> Signed-off-by: Biju Das
> Reviewed-by: Fabrizio Castro
> ---
> Commit 73dacc3403436fc2 ("pinctrl: sh-pfc: Add r8a77470 PFC support")
> is in Linus' tree
> ---
> arch/arm/boo
On Fri, Jul 20, 2018 at 02:07:02PM +0100, Biju Das wrote:
> Replace the hardcoded power domain indices by R8A77470_PD_* symbols.
>
> Signed-off-by: Biju Das
> Reviewed-by: Chris Paterson
> ---
> Commit 964f7c0dd23de68c0 ("soc: renesas: rcar-sysc: Add r8a77470 support")
> is in Linus' tree
> ---
On Fri, Jul 20, 2018 at 02:28:57PM +0200, Geert Uytterhoeven wrote:
> Update the SATA device nodes on R-Car H1, H2, and M2-W to use a 2 MiB
> I/O space, as specified in Rev.1.0 of the R-Car H1 and R-Car Gen2
> hardware user manuals.
>
> See also commit e9f0089b2d8a3d45 ("arm64: dts: r8a7795: Corre
On Fri, Jul 20, 2018 at 02:27:38PM +0200, Geert Uytterhoeven wrote:
> No functional changes.
>
> Signed-off-by: Geert Uytterhoeven
Applied 1-2 to libata/for-4.19.
Thanks.
--
tejun
Hi Morimoto-san,
Thank you for your review.
2018-07-20 8:23 GMT+09:00 Kuninori Morimoto :
>
> Hi
>
>> From: Takeshi Kihara
>>
>> Based on several similar patches of the R8A7796 device tree
>> by Kuninori Morimoto .
>>
>> Signed-off-by: Takeshi Kihara
>> Signed-off-by: Yoshihiro Kaneko
>> ---
>
Hi Morimoto-san,
Thank you for your review.
I will exclude this patch from the series and repost this as a single
patch to ALSA SoC ML.
Best regards,
Kaneko
2018-07-20 8:12 GMT+09:00 Kuninori Morimoto :
>
> Hi
>
> Thnak you for your patch
>
>> From: Hiroyuki Yokoyama
>>
>> Document support for
Hi Geert-san,
Thank you for your review.
I will correct the sort order of the audma nodes and a typo of the commit log.
Best regards,
Kaneko
2018-07-18 18:06 GMT+09:00 Geert Uytterhoeven :
> On Tue, Jul 17, 2018 at 9:48 PM Yoshihiro Kaneko
> wrote:
>> From: Takeshi Kihara
>>
>> This patch ad
Hi Wolfram,
Thanks for your patch.
On 2018-07-21 13:14:49 +0200, Wolfram Sang wrote:
> This patch adds SDHI support for the R8A77990 SoC (R-Car E3). No driver
> changes
> needed for anything except HS400 which we will enable separately later.
>
> Signed-off-by: Wolfram Sang
Reviewed-by: Nikla
From: Michel Pollet
Add a special enable method for the second CA7 of the R9A06G032
as well as the default value for the "cpu-release-addr" property.
Signed-off-by: Michel Pollet
Reviewed-by: Geert Uytterhoeven
Signed-off-by: Simon Horman
---
arch/arm/boot/dts/r9a06g032.dtsi | 2 ++
1 file c
From: Viresh Kumar
The OPP properties, like "operating-points", should either be present
for all the CPUs of a cluster or none. If these are present only for a
subset of CPUs of a cluster then things will start falling apart as soon
as the CPUs are brought online in a different order. For example
From: Wolfram Sang
Signed-off-by: Wolfram Sang
Acked-by: Yoshihiro Shimoda
Acked-by: Kuninori Morimoto
Signed-off-by: Simon Horman
---
arch/arm/boot/dts/emev2-kzm9d.dts | 5 +
arch/arm/boot/dts/emev2.dtsi| 5 +
arch/arm/boot/dts/iwg20d-q7-com
From: Jacopo Mondi
Add device tree header for GR-Peach's audiocamerashield with MT9V111
image sensor.
Signed-off-by: Jacopo Mondi
Reviewed-by: Simon Horman
Signed-off-by: Simon Horman
---
arch/arm/boot/dts/gr-peach-audiocamerashield.dtsi | 79 +++
1 file changed, 79 inser
From: Geert Uytterhoeven
Replace the hardcoded clock indices by R8A77470_CLK_* symbols.
Signed-off-by: Geert Uytterhoeven
Reviewed-by: Biju Das
Signed-off-by: Simon Horman
---
arch/arm/boot/dts/r8a77470.dtsi | 16
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a
From: Marek Vasut
Add PMIC nodes to Porter and connect CPU DVFS supply. There is
one DA9063L and one DA9210 on Porter, the only difference from
the other boards is that DA9063L is at I2C address 0x5a rather
than 0x58 .
Signed-off-by: Marek Vasut
Reviewed-by: Geert Uytterhoeven
Signed-off-by: S
From: Michel Pollet
This adds the Renesas R9A06G032 bare bone support.
This currently only handles the SYSCTRL block note,
generic parts (gic, architected timer) and a UART.
Signed-off-by: Michel Pollet
Reviewed-by: Geert Uytterhoeven
[simon: updated MAINTAINERS file
[simon: do not use r9a06g
From: Michel Pollet
This adds a base device tree file for the RZN1-DB board, with only the
basic support allowing the system to boot to a prompt. Only one UART is
used, with only a single CPU running.
Signed-off-by: Michel Pollet
Reviewed-by: Geert Uytterhoeven
Signed-off-by: Simon Horman
---
Hi Olof, Hi Kevin, Hi Arnd,
Please consider these Renesas ARM based SoC DT updates for v4.19.
Changes since v1:
* Dropped patch which removes MTD partitioning from DT,
Olof requested more discussion of this
* Trimmed text in tag, as per suggestions from Olof
The following changes since commit
From: Geert Uytterhoeven
No recent mainstream system uses the /sbin/hotplug fork-bomb any more.
Commit 7934779a69f1184f29d786b89e77dd14519bd226 ("Driver-Core: disable
/sbin/hotplug by default") disabled it in Kconfig, but the various
defconfigs weren't updated.
According to the systemd requireme
From: Geert Uytterhoeven
Enable support for the Renesas RZN1D-DB Board:
- RZ/N1D (R9A06G032) base SoC support,
- Synopsys DesignWare 8250 serial port support.
Signed-off-by: Geert Uytterhoeven
Signed-off-by: Simon Horman
---
arch/arm/configs/shmobile_defconfig | 2 ++
1 file changed, 2 in
From: Geert Uytterhoeven
Enabling NET_VENDOR_* Kconfig options does not directly affect the
kernel, so there is no need to explicitly disable them.
The individual network drivers under them are still disabled.
Signed-off-by: Geert Uytterhoeven
Signed-off-by: Simon Horman
---
arch/arm/configs/
From: Geert Uytterhoeven
R-Car Gen2 and RZ/G1 SoCs can make use of the optional reset controller
support in the Renesas CPG/MSSR driver.
Signed-off-by: Geert Uytterhoeven
Signed-off-by: Simon Horman
---
arch/arm/configs/shmobile_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/ar
From: Geert Uytterhoeven
Enable support for the Renesas RZN1D-DB Board:
- RZ/N1D (R9A06G032) base SoC support.
Signed-off-by: Geert Uytterhoeven
Signed-off-by: Simon Horman
---
arch/arm/configs/multi_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/multi_v7_
Hi Olof, Hi Kevin, Hi Arnd,
Please consider these Renesas ARM based SoC defconfig updates for v4.19.
Changes since v1:
* Dropped patch to set CONFIG_LOCALVERSION as requested by Olof
* Dropped patch to Enable MTD command line partition parsing as
Olof has asked for more discussion on the relate
On Sat, Jul 21, 2018 at 02:46:20PM -0700, Olof Johansson wrote:
> Hi,
>
> On Fri, Jul 20, 2018 at 02:04:41PM +0200, Simon Horman wrote:
> > Hi Olof, Hi Kevin, Hi Arnd,
> >
> > Please consider these Renesas ARM based SoC DT updates for v4.19.
> >
> >
> > The following changes since commit ce397d
On Sat, Jul 21, 2018 at 03:03:43PM -0700, Olof Johansson wrote:
> On Fri, Jul 20, 2018 at 02:03:54PM +0200, Simon Horman wrote:
> > Hi Olof, Hi Kevin, Hi Arnd,
> >
> > Please consider these Renesas ARM based SoC defconfig updates for v4.19.
> >
> >
> > The following changes since commit ce397d21
Hi Olof,
On Sun, Jul 22, 2018 at 12:27 AM Olof Johansson wrote:
> On Fri, Jul 20, 2018 at 02:03:54PM +0200, Simon Horman wrote:
> > Please consider these Renesas ARM based SoC defconfig updates for v4.19.
> > * Set CONFIG_LOCALVERSION to shmobile_defconfig
> >
> > This follows what appears to
Hi Marek,
On Sun, Jul 22, 2018 at 2:07 PM Marek Vasut wrote:
> On 07/20/2018 06:38 PM, Sergei Shtylyov wrote:
> > On 07/20/2018 03:05 PM, Simon Horman wrote:
> >> From: Marek Vasut
> >>
> >> Add PMIC nodes to Porter and connect CPU DVFS supply. There is
> >> one DA9063L and one DA9210 on Porter,
39 matches
Mail list logo