wrong or something else. Help me out.
Best Regards
丰立波 Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone: 0086-010-62801406
--
linuxbios mailing list
linuxbios@linuxbios.org
http://www.linuxbios.org/mailman/listinfo/linuxbios
Hi, all,
In PCI, the IDSEL pin defines the device number. But in PCIe, there is no such
pin, how is the device number defined?
Best Regards
丰立波 Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone: 0086-010-62801406
--
linuxbios mailing list
linuxbios@linuxbios.org
http
Hi, all,
Is this possible that the FLASH memory containing BIOS code can be partly saved
for NVRAM? Programming FLASH chip is not as easy and fast as RAM, but it is
larger and holds data for ever.
Best Regards
丰立波 Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone: 0086-010
Hi, all,
Who has the VGA BIOS for ATI ES1000 with DDRII frame buffer instead of DDR
frame buffer? Could you send me a copy? Thank you in advance.
Best Regards
丰立波 Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone: 0086-010-62801406
--
linuxbios mailing list
linuxbios
trace. My
understanding is right or not?
Best Regards
??? Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone: 0086-010-62801406
-Original Message-
From: yhlu [mailto:[EMAIL PROTECTED]
Sent: Friday, November 30, 2007 3:46 PM
To: Feng, Libo
Cc: Jones, Marc; linuxbios
Subject
Hi, all,
But the function init_cpus is called before the three functions:
w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); uart_init(); console_init();
The trace is sent out from the init_cpus.
Best Regards
丰立波 Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone: 0086-010
Hi, all,
In our board, we found the trace is sent out: "Issuing SOFT_RESET…" from the
function init_cpus in the file init_cpus.c. But when the function runs, the
serial port is still far to be initialized, how dose the trace is sent out?
Best Regards
丰立波 Feng Libo @ AMD Ext: 20
. So the idea led me to a
wrong direction. The file io_apic.c under arch/i386/kernel tells me all secret:
the function assign_irq_vector(irq), as its name, assigns a vector to an IRQ of
APIC.
==
Best Regards
??? Feng Libo @ AMD
Hi, all,
A simple question: when talking about IRQ, you mean one of the 256 interrupt
vectors within x86, or one of the pins of APIC, or one of the pins of 8259? I
always got confused by it.
Best Regards
丰立波 Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone: 0086-010
find where the code
is located. Who could give me a clue? Thank you in advance.
Best Regards
丰立波 Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone: 0086-010-62801406
--
linuxbios mailing list
linuxbios@linuxbios.org
http://www.linuxbios.org/mailman/listinfo/linuxbios
Best Regards
丰立波 Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone: 0086-010-62801406
From: Darmawan Salihun [mailto:[EMAIL PROTECTED]
Sent: Thursday, September 13, 2007 12:21 PM
To: Feng, Libo; linuxbios
Subject: Re: [LinuxBIOS] A question o
hyper transport,
and LPC is attached to BCM 5785. However, when the first instruction is fetched
from BIOS, HT is not well initialized yet. How the data get to the data bus of
processor?
Best Regards
丰立波 Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone: 0086-010-62801406
Generally, I2C mux has some external pins to set its address. In my Tyan S3992,
the address is 0x71, so the function activate_spd_rom is called before
accessing SPD.
Best Regards
??? Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone: 0086-010-62801406
-Original Message
Hi, Mr. Lu,
You are quit right. I commented out two statements in Config.lb as you suggest,
the keyboard can work now. The attached is the modified file, a BTDC tag
indicates where I modified. Thank you a lot.
Best Regards
??? Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office
nk you. We just
want to gain some BIOS experience, so the LinuxBIOS version is very old.
Best Regards
??? Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone: 0086-010-62801406
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Peter Stuge
Se
;ops,
PC87417_KBCK, PNP_IO0 | PNP_IO1 | PNP_IRQ0, {0x7f8, 0}, {0x7f8, 4}}, is it
correct? I think it should be PNP_IRQ1, {0x60, 0} and {0x60, 4}, I changed it,
but still no keyboard. What should I do next?
Best Regards
??? Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone: 0086-010-6280
cc is 4.0.0. Because we
just want to get some BIOS experience by learning LinuxBIOS, so the version is
very old.
Best Regards
丰立波 Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone: 0086-010-62801406
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On B
configure keyboard
or not?
Best Regards
丰立波 Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone: 0086-010-62801406
--
linuxbios mailing list
linuxbios@linuxbios.org
http://www.linuxbios.org/mailman/listinfo/linuxbios
Hi, all,
Northbridge: AMD M690T/485T
Southbridge: AMD SB600/460
CPU: S1 Sempron
SIO: IT8712F
Is there any system similar with my system? So I can have a base, then I can
adapt it. Thank you.
Best Regards
丰立波 Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone: 0086-010-62801406
and linear memory are the same and exchangeable.
or linear memory
In LinuxBios community, which term is used?
Best Regards
丰立波 Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone: 0086-010-62801406
--
linuxbios mailing list
linuxbios
: Machine check
ng dm-snapshot.ko module
<>
Best Regards
丰立波 Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone: 0086-010-62801406
?
LinuxBIOS-2.0.0_Fallback Thu Jul 5 19:54:34 CST 2007 starting...
*sysinfo range: [000cf000,000cf730)
bsp_apicid=00
01 nodes initialized.
core0 s
Hi, Mr Lu,
Can we boot Linux with the propriety BIOS and then run getpir utility to get
irq routing? We don't have the Explosion schematic.
Best Regards
??? Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone: 0086-010-62801406
-Original Message-
From: yhlu [m
Hi, all,
Who can tell me a general question about BIOS: how many tables exist in BIOS,
which will be used by Operating System later? As far as I know, there are the
IRQ table, MP table, ACPI table. Any others?
Best Regards
丰立波 Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office
Hi, Mr. Ron Minnich,
Do you mean the IRQ table? We use the irq_tables.c under Broadcom/blast. We
just thought Explosion has the same interrupt routing with Blast. We will try a
new IRQ table generated by getpir utility.
Thanks.
Best Regards
??? Feng Libo @ AMD Ext: 20906
Mobile Phone
Hi, all.
We adapted LinuxBIOS for Broadcom Explosion based on Blast LinuxBIOS. It runs
well in LinuxBIOS phase, but in Linux phase, there are some problems. It seems
the hard disk can't be found. Anyone has the same problem? The attached is the
log.
Best Regards <>
丰立波 Feng Libo
oding logic leads the address to the right
place. My understanding is correct?
Best Regards
??? Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone: 0086-010-62801406
-Original Message-
From: Juergen Beisert [mailto:[EMAIL PROTECTED]
Sent: Wednesday, May 30, 2007 7:27
Thank you, Mr. Darmawan Salihun.
I will google the key words you gave.
I am still not quite clear about the second question. Before BIOS runs, the
system must know where BIOS FLASH is attached, LPC, X-BUS or PCI? How?
Best Regards
??? Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
I am also confused a little. The propriety BIOS runs in the real mode, how does
it test the memory beyond 1MB?
Another question is BIOS ROM can attach to XBUS, LPC, someone told me, even
PCI, how dose the address forward to the location?
Best Regards
??? Feng Libo @ AMD Ext: 20906
Mobile
ly.
Best Regards
丰立波 Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone: 0086-010-62801406
--
linuxbios mailing list
linuxbios@linuxbios.org
http://www.linuxbios.org/mailman/listinfo/linuxbios
Oh, I remember that we also changed SMBUS_HUB in the function activate_spd_rom
in cache_as_ram_auto.c because we couldn't get correct data from SPDROM at
first.
Best Regards
丰立波 Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone: 0086-010-62801406
-Original Me
Our GCC is 4.0.0. We will try a new version GCC. Thank you.
Best Regards
丰立波 Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone: 0086-010-62801406
-Original Message-
From: yhlu [mailto:[EMAIL PROTECTED]
Sent: Tuesday, May 08, 2007 12:14 PM
To: Feng, Libo
Cc: AlexHuang
c, it
was a big surprise that the RAM initialization was passed. All were done based
on AMD Athlon 64x2. Just for your reference. Mr. Lu Yinghai owns the file,
maybe he can give more technical explanation.
Best Regards
丰立波 Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office
to 0xc, 0x9000 bytes
entering emulator
un-inited int vector
halt_sys: file /home/fengl/LinuxBIOSv2-2584/src/devices/emulator/x86emu/ops.c,
line 4387
=
Best Regards
??? Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone
us_isa=8
bus_isa=9
Writing IRQ routing tables to 0xf...done.
Wrote the mp table end at: 0020 - 024c
Moving GDT to 0x500...ok
Wrote linuxbios table at: 0530 - 0de8 checksum 8ae6
Welcome to elfboot, the open sourced starter.
January 2002, Eric Biederman.
Version 1.3
ng at 0xfffc.
BTW, I always run buildtarget after changing Config.lb, is it OK?
Best Regards
??? Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone: 0086-010-62801406
-Original Message-
From: yhlu [mailto:[EMAIL PROTECTED]
Sent: Thursday, April 26, 2007 10:41 AM
To: Feng, Li
device number? Thank you.
Best Regards
丰立波 Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone: 0086-010-62801406
--
linuxbios mailing list
linuxbios@linuxbios.org
http://www.linuxbios.org/mailman/listinfo/linuxbios
My colleagues are using the board, so I have to wait.
Mr. Lu, you mean ATI card is attached to PCIX of 5780? I am confused.
Best Regards
??? Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone: 0086-010-62801406
-Original Message-
From: yhlu [mailto:[EMAIL PROTECTED
f b. There is
totally no boot log if with the device number of a.
Best Regards
??? Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone: 0086-010-62801406
-Original Message-
From: yhlu [mailto:[EMAIL PROTECTED]
Sent: Thursday, April 26, 2007 12:15 AM
To: Feng, Libo
Cc:
nd the device
number is hex or decimal? What else variable should be set in config file? Do I
need to switch the console from serial port to VGA? How? Thank you very much.
Best Regards
丰立波 Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone: 0086-010-62801406
--
l
The SPD address is composed with RC0, RC1 and DIMM0, DIMM1. But what is RC0 and
RC1? Different mainboard has different RC0 and RC1, who defines the two? DIMM
sockets or processor or others? Thank you.
Best Regards
丰立波 Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone: 0086
Now that DRAM is initialization and tested, the second part of LinuxBios is
copied into DRAM and runs.
Best Regards
??? Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone: 0086-010-62801406
From: [EMAIL PROTECTED] [mailto:[EMAIL
$@ -T ldscript.ld crt0.o
$(INIT-OBJECTS)
$(CROSS_COMPILE)nm -n linuxbios | sort > linuxbios.map.
So, there is no action on LINUXBIOS_RAM_ROM. Does it mean linuxbios_ram is not
very important. Even without it, the system is also ok?
Feng Libo
--
linuxbios mailing list
linuxbios@linuxbios.
42 matches
Mail list logo