I modify the image used in the eprom because i am using a wrong one
the correct I identify by booting de lzdisk image in a diskette
BUt the flash eprom not boot in the card in despite off i enable the eprom in the card
using diag.exe program
The card is a Via Rhine 6105
and the pc is an old
You can't set them all to use the same profile. Copy the .phoenix
directory into each student's home directory. For example:
/home/student01/.phoenix
/home/student02/.phoenix
etc.
Then make sure to chown student1 .phoenix and it's subdirectories, etc.
Don't link them to a central one, the lockf
> I enable the eprom using the diag.exe soft , but the workstation not boot from the
> card.
>
> Is an old P120 and it not have Boot From lan in setup
Make sure you selected the correct rom via. It needs to match the pci
vendor and device id. There are 5 different via-rhine devices:
stati
- (on students)
This e-mail message and / or its attachment(s) does not engage the responsibility of
the sender nor does it bind the Polytechnic of Namibia in any way.
-
Hi all,
Thanks for all yo