unsuscribe
---
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.co
What do you think about Mandrake Terminal Server in comparition
to LTSP ?
thnks
Bruno
---
This SF.Net email is sponsored by: GNOME Foundation
Hackers Unite! GUADEC: The world's #1 Open Source Desktop Event.
GNOME Users and Developers European Con
I modify the image used in the eprom because i am using a wrong one
the correct I identify by booting de lzdisk image in a diskette
BUt the flash eprom not boot in the card in despite off i enable the eprom in the card
using diag.exe program
The card is a Via Rhine 6105
and the pc is an old
. OK i JUST GRAB 16 K ON A 64 EPROM BUT ??
I enable the eprom using the diag.exe soft , but the workstation not boot from the
card.
Is an old P120 and it not have Boot From lan in setup
Any help Please
Thanks in advance
Bruno Luciani
Argentina
sessions.
I change the maximun sessions in gdm.conf but only works more time and then crash
again ..
Its seem that the server have an acount of sesions started and at some number of
logins xdmcp crash.
any help whit that
thanks in advance
Bruno Luciani
I dont know about RH9 but in mandrake you can edit
the taskbar an the menu in /usr/X11R6/lib/x11/icewm/ in this directory
you can found some files that have the settings of icewm
Remember that in the taskbar and menu the icons must be .xpm
Bruno Luciani
Linuxtech Systems
On Wed, 10 Dec
Hey Ken , where are you from ?
You are from brazil ?
I am in Argentina and in this moment I am trying to open a
Cyber Cafe using LTSP , but some people don't like
this because is diferent from M$ software and in his
ignorance the unknown is bad , what do you think ?
Bruno
Ramallo ( a lit
but I dont know wich's , one of the cards is an onboard CMI , aparently
all work ok , I am using ESD, but I don't have sound in this workstations.
I have a variety of sound cards, where I found some tips on configurations ?
Thanks in advance , and sorry for my english
Bruno Luciani
Bu
Check if the modules are loaded during boot ,
What type of instalation you do ? using rpm ?
Linux distribution?
I have a similar problem and I discover that some modules (serial etc etc)
are not in his place...
Try install ltsp from .tgz files
Bruno
On Mon, 25 Aug 2003 19:09:41 -0400
"Roy Ra
th the boot program ?
Thanks for the help
yours
Bruno Luciani
Linuxtech Systems
Argentina
On Thu, 21 Aug 2003 10:04:56 +0200
Andy Rabagliati <[EMAIL PROTECTED]> wrote:
> On Wed, 20 Aug 2003, Bruno Luciani wrote:
>
> > OK I know this but I am using good cables and a Po
ngewhite orange, greenwhite
> blue,bluewhite green, brownwhite brown and test cables for continuity.
> If it is a cable issue that should fix it.
> Scott Carle
>
> On Tue, 2003-08-19 at 16:42, Bruno Luciani wrote:
> > I install ltsp and put to work using a 10mbit hub
> >
whats happening here ?
I think LTSP must work in a 100mbit network
thanks in advance for any help
Bruno Luciani
Buenos Aires
Argentina
---
This SF.net email is sponsored by Dice.com.
Did you know that Dice has over 25,000 tech jobs
Fijate si no tenes activa la firewall por defecto de Mandrake9.1
en mi caso impedia el funcionamiento correcto del tftp.
HAbria que desactivar shorewall
espero que te sirva
Saludos
Bruno Luciani
Ramallo Buenos AIres
El Vie 20 Jun 2003 02:20, Usuario de Sistemas y Comp. escribió:
> Hola a to
from network in his setup.
In other hand if I can't boot easy from the card , the floopy is the Best.
What is it for the rom boot in question ?
thanks Bruno Luciani
El Dom 15 Jun 2003 01:42, escribió:
> Bruno Luciani wrote:
> > I am ready to burn my own rom
> >
> >
Ok I try yhis chip thanks for the help
Bruno Luciani
El Sáb 14 Jun 2003 23:42, [EMAIL PROTECTED] escribió:
> On Sat, 14 Jun 2003, Bruno Luciani wrote:
> > I am ready to burn my own rom
> >
> > but : which is the correct type of chip for my card ?
> >
> >
I am ready to burn my own rom
but : which is the correct type of chip for my card ?
the rom is a rtl8139 10ec rom
It's correct to use a 27c128 eprom chip ?
which time access is necesary: 120ms may be ?
thanks in advance for the help
Bruno Luciani
Bs As
Argentina
linuxtech Sy
this question ?
May be this help you
Bruno Luciani
Ramallo-Bs As
Linuxtech Systems
http://www.linuxtech.com.ar
El Dom 08 Jun 2003 09:38, Bjørn-Sverrre Nøttum escribió:
> Hi!
>
> I am trying to install ltsp on my redhat 9 server, but it is not very
> successfull. I have used ltsp o
thinks trough internet
I try to make my own Programmer or pay to anybody to program the eproms
Which are the files needed to burn the eproms I think a binary file
I need for rtl8139 , 8029 , dm9102 and sis900
Thanks to averybody to helpme with this project.
Bruno Luciani Garkauskas
Ramallo
__
> > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
> > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
> > For additional LTSP help, try #ltsp channel on irc.freenode.net
--
Bruno Luciani
//
easy)
Can anybody helpme with an electronic circuit of a programmer and recommend a
software to do this ?
Thanks in advance
--
Bruno Luciani
Buenos Aires
Argentina
///Linux Mandrake 9.1///
---
This SF.net email is sponsored by: Etnus, m
PRINTER_0_DATABITS = 8 # Databits: 5,6,7,8 (defaults to 8)
/////
--
Bruno Luciani
///Linux Mandrake 9.1///
---
This SF
e !
> Regards
> Jean Christophe
>
> Bruno Luciani a écrit:
> >Yes here is , the error in the terminal is can' t open serial device
> >/dev/ttyS0 or something else and the mouse is conected and chequed that it
> >works ok in this port , I dont't know
t; #PRINTER_0_SPEED= 9600 # baud rate: defaults to 9600
> > #PRINTER_0_FLOWCTRL = S # Flow control: S-Software (XON/XOFF),
> > # # H-Hardware (CTS/RTS)
> > #PRINTER_0_PARITY = N # Parity: N-None, E-Even, O-
23 matches
Mail list logo
