Yep, couldn't do it. Can't remember the error, so installed StarOffice,
but...
-s
On Monday 11 December 2000 22:50, you wrote:
> Is there anyone else out there having trouble getting WordPerfect 8 to
> install in LM 7.2. I had it working great in 7.0 but after installing 7.2
> it won't insta
Hello Mr Ganesan,
That may have worked under 7.1, which used inetd. It seems like 7.2
uses xinetd, which as far as I can tell, requires a different type of
configuration. The line you suggested was already uncommented. Any
other suggestions?
Are you in Bangalore? If so, you can call me at 35
On Mon, 11 Dec 2000, Adrian Smith wrote:
>hi Paul --
>thanks for responding. i checked my config file and it contains
>ViewPort 0 0
>already. does this mean i should try changing those settings?
>or would my problem be something else?
>thanks yet again=)
Hmmm. This should show that the pro
Is there anyone else out there having trouble getting WordPerfect 8 to
install in LM 7.2. I had it working great in 7.0 but after installing 7.2 it
won't install.
On Mon, 11 Dec 2000, Jim V. wrote:
May be that I am mistaken on the name...
On my page http://nlpagan.net/linux.htm there should be a working link
(have not checked that lately though)
Paul
>I have tried every combination of .org/.com and .linux/.aureal. that I
>can think of to find those drive
- Original Message -
From: "civileme" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, December 11, 2000 1:28 PM
Subject: Re: [newbie] Another KDE2 2.0.1 ?
> On Monday 11 December 2000 15:43, you wrote:
>
> > > Really can´t understand. First Mandrake quit 2.0.1 version of KDE,
Try the same thing I sent to the list earlier:
"I think I answered this for somebody else yesterday.
do an ls-l on your cdrom
you will find that it is a link to some other filename
and the other name does not have the necessary permissions.
whatever name the file points to (-->) do a chmod on
On Monday 11 December 2000 05:26 pm, you wrote:
> Wilson wrote:
> > Tried your suggestion, didn't work. The cd wil play you can see the time
> > counting up but no sound. There is no problem with mp3's and system
> > sounds. Thanks for the suggestion.
>
> Have you made any hardware changes to yo
There was a recent article on burners in a local computer rag that you pick
up free at grocery and computers stores. The Yamahas were the most highly
recommended followed by the Plextors. Of course the cost a little more too.
Rick
Thanks for the response. Yes it works in Windows and I did check the cables
so I'm not sure what is wrong.
Wilson
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
John Rye
Sent: Monday, December 11, 2000 5:26 PM
To: [EMAIL PROTECTED]
Subject: Re: FW: [ne
Hi,
I have been using windoze for ten years. I am moving away from
windoze now and have got
suse 7, mandrake 7 & 7.1, corel 1 & 1.2 R H 6 & 6.2
I find linux very easy to install and run, the only problem I am
having is installing software.
I have a scanner which I would love to use under linux
Hi,
You should check out http://www.lexmark.com
I contacted them and they said they had drivers for the Z32 and Z52
printers. But you never know what you will find untill you look.
I hope this helps you out.
Regards Anthony Daniell.
- Original Message -
From: Joan Tur <[EMAIL PROTECTED]>
Has anyone had any luck setting up this printer or a similar one on Linux?
I am using RedHat7, but I tried figuring it out on my Mandrake machine
using the file from linuxprinting.org, but I had no clue how to do it. If
anyone has any guidance, it would be appreciated. Thanks.
Regards,
Justin
On Monday 11 December 2000 17:00, you wrote:
> Tried your suggestion, didn't work. The cd wil play you can see the time
> counting up but no sound. There is no problem with mp3's and system
> sounds. Thanks for the suggestion.
>
> Wilson
>
> On Monday 11 December 2000 04:48 pm, you wrote:
> > --
OOPS! I sent ya-all a dead link. The updated site is here:
http://www.geocities.com/bofh_666/aureal.html
>From personal experience, these drivers WORK!
Paul,
To change the "format" that you compose with click on
Edit-->Preferences-->Mail and Newsgroup-->Send Format
then click on "convert the message to plain text"
Under Edit-->Mail/News Account settings the first panel near the bottom is
a check box. Left unchecked the composi
Tried your suggestion, didn't work. The cd wil play you can see the time
counting up but no sound. There is no problem with mp3's and system sounds.
Thanks for the suggestion.
Wilson
On Monday 11 December 2000 04:48 pm, you wrote:
> -Original Message-
>
> You can try this (as root)
Heck yea...Diskdrake will do a real nice job of resizing the DOS partition
so you can make some Linux partitions. One thing you want to watch that
you don't do and that is to make the new Linux partitions behind an
extended DOS partition. This is a very bad thing to do and will result in
partition
I had to install using "Expert" and increase the partition sizes.
Security had to be "Medium" NOT "High".
Finding KFTP never happened but, I did successfully use GIFT!
Thanks Newsier Group!
Becky
Paul:
I noticed this a few months back when I was getting a lot of
bounce-backs. My recollection is that it occurred on postings that had
multiple reply-to addresses that included mandrax.org, and that they
often originated with the good people of Mandrake.
Regards,
Carroll
Paul wrote:
>
>
Wilson wrote:
>
> Tried your suggestion, didn't work. The cd wil play you can see the time
> counting up but no sound. There is no problem with mp3's and system sounds.
> Thanks for the suggestion.
Have you made any hardware changes to your box?
Check your cables from Sound card to CDrom driv
"Jim V." wrote:
>
> Does anybody have any idea where I could find drivers for the Aureal
> Vortex Soundcard (Turtle Beach, Montego, etc)??
>
> This is for Mandrake 7.1.
>
> --
> _
> Jim Van Cleaf
> Motley + Associates, P.C.
Sourceforge has them, as does the following si
You can get this update in:
http://ftp.sourceforge.net/pub/mirrors/kde/stable/2.0.1/distribution/rpm/Mandrake/7.2/
Is very convenient to download not only the rpm files, but also the
README, with interesting advice about how to update.
In my case some of the rpms didn't want to update, I did the
Jim
The Aureal site is no more other than the home page.
You can download the Vortex drivers from
http://www.vortexofsound.com/drivers/drivers.htm
Just choose your card and the Linux OS from the drop down menus.
Charles (-:
Forever never goes beyond tomorrow.
-Original Message-
- Mensaje Original -
Remitente: Graham Kerr <[EMAIL PROTECTED]>
Fecha: Lunes, Diciembre 11, 2000 11:26 pm
Asunto: Re: [newbie] USB support
> Huh???
>
> Ive got both a USB scanner (Primax) and webcam (only god knows who
> made it..),
> Can I use these setting for my gadgets???
>
>
I have added the line
/mnt/magc /mnt/magc supermountfs=smbfs,
dev=//mags/MAGC,username=ron,password= 0 0
in /etc/fstab.
When I reboot, I get the following error message:
mount: wrong fs type, bad option, bad superblock on /mnt/magc, or too
many mounted file systems
The mount point (/mn
hi Paul --
thanks for responding. i checked my config file and it contains
ViewPort 0 0
already. does this mean i should try changing those settings?
or would my problem be something else?
thanks yet again=)
Adrian Smith
'de telepone dude
Telecom Dept.
x 7042
[EMAIL PROTECTED]
>>> Paul
http://www.voterxfsound.com/drivers/drv_lnx.htm
Read the page and...
Try to download the unofficial drivers, the link is at the end of this
webpage, they are improved.
Francisco Alcaraz
(Murcia, Spain)
- Mensaje Original -
Remitente: "Jim V." <[EMAIL PROTECTED]>
Fecha: Lunes, Diciembre
Huh???
Ive got both a USB scanner (Primax) and webcam (only god knows who made it..),
Can I use these setting for my gadgets???
Cheers
Monster
On Sun, 10 Dec 2000, you wrote:
> In my case I have a scanner Epson Perfection 1200U and I have to do the
> next:
>
> a) create the devices typin
There are no drivers for the vortex soundcards. Either 1, 2, or 3.
-Original Message-
From: Jim V. [mailto:[EMAIL PROTECTED]]
Sent: Monday, December 11, 2000 2:21 PM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Aureal Vortex
I have tried every combination of .org/.com and .linux/.aureal.
I have tried every combination of .org/.com and .linux/.aureal. that I
can think of to find those drivers, but apparently that site is down
I wonder if it is for good. I know that Aureal go taken over by Creative
Labs
Anybody have any other ideas?
Paul wrote:
> On Mon, 11 Dec 2000, Jim
On Mon, 11 Dec 2000, Joan Tur wrote:
>Hallo!
>
>Does anyone know if there are drivers for such printer? I haven't been
>able to find them in linuxprinting.org 8-(
This printer is NOT supported
Do not even try to use it with a Z1 or Z10 or something driver, I have
heard that this is capable of
Does anybody have any idea where I could find drivers for the Aureal
Vortex Soundcard (Turtle Beach, Montego, etc)??
This is for Mandrake 7.1.
--
_
Jim Van Cleaf
Motley + Associates, P.C.
Thanks Paul,
This is actually my second installmy first was on a partitioned hard
drive. I obviously did not save my documentation from the first time I went
through this process!!
That should fix it.
JimV
Paul wrote:
> On Mon, 11 Dec 2000, Jim V. wrote:
>
> >I just recently installed
On Mon, 11 Dec 2000, Jim V. wrote:
>Does anybody have any idea where I could find drivers for the Aureal
>Vortex Soundcard (Turtle Beach, Montego, etc)??
>
>This is for Mandrake 7.1.
www.aureal.linux.com (might be .org)
Paul
--
How do you set a laserprinter to stun?
http://nlpagan.net - ICQ
Just a note of warning...
I had already tried the option stated below and that caused major problems.
It apparently was trying to replace settings for Grub with Lilo settings, and
basically produced a non-bootable drive. This only happened when you used
the "Boot" section to edit boot options ins
Nobody followed up, but I figured out my problem.
I was running MandrakeUpdate from an NFS mounted directory. If I move
do a local directory, like / and try run MandrakeUpdate it works. I
don't know why it matters as it doesn't seem to write anything to that
directory but it matters.
On Monday 11 December 2000 15:43, you wrote:
> > Really can´t understand. First Mandrake quit 2.0.1 version of KDE, but can
> download it, but not installed because some guys from the list said it´s
> bad. And now in tucow´s ftp I find an update ONLY for Mandrake 7.2. This
> have minor size than
I just recently installed Linux Madrake 7.1 Complete.
I am interested in finding out how to edit the configuration of Grub
(default boot).
In specific, I am interested in changing the # of seconds before it is
automatically loaded, and which hard drive (I have two hard drives with
two operating sy
Mark Johnson wrote:
>
> While I'm at it, can anyone suggest a descent burner that works well in a
> dual boot system with windows and linux?
I've been very pleased with my Acer 8432A with an 8MB buffer, not to be
confused with the Acer 8432IA, with a 2MB buffer. You should be able to
find one f
Hi,
I've installed 7.2 on weekend and it's very nice.
I've got one bigger problem.
PHP4 is installed(rpm -q) but in the Apache-config file it's not adjusted and
Apache doesn't read php or php3 files.
Where should I start to adjust my installation.
I'm afraid to make some bad mistakes if I follow
Does anyone know if there is a place that lists hardware compatibility with
linux. I want to get a cd burner, but don't want to risk buying one that
won't work with linux. My first CD-ROM wouldn't work in conjuction with my
motherboard and linux, I don't want to go through that headache again.
Not sure about the list but I have a Yamaha scsi burner that works in both
Windows and Linux : )
http://www.linux-mandrake.com/en/fhard.php3
At 09:25 AM 12/11/2000 -0600, you wrote:
>Does anyone know if there is a place that lists hardware compatibility with
>linux. I want to get a cd burner, but don't want to risk buying one that
>won't work with linux. My first CD-ROM wouldn't work in co
It is fixed now. I read a post that just came down.
Thanks Dave Degear.
-Original Message-
From: Michael, Steve [mailto:[EMAIL PROTECTED]]
Sent: Monday, December 11, 2000 9:29 AM
To: Mandrake Linux News group (E-mail)
Subject: [newbie] enable telnet from a remote machine.
I have inst
1) What does the following entry into /var/log/messages mean? 2)
How can I stop future connections?
portmap[29706]: connect from 202.156.38.254 to dump(): request from
unauthorized host
Note: When you reply to this message, please include the mailing
list and my email address.
**
Really can´t understand. First Mandrake quit 2.0.1
version of KDE, but can download it, but not installed because some guys from
the list said it´s bad.
And now in tucow´s ftp I find an update ONLY for
Mandrake 7.2. This have minor size than previous. And have a Readme very
usefull to upgra
look for the telnet-server rpm on the cdrom, it is there ;)
=>-Original Message-
=>From: Michael, Steve [mailto:[EMAIL PROTECTED]]
=>Sent: Monday, December 11, 2000 9:29 AM
=>To: Mandrake Linux News group (E-mail)
=>Subject: [newbie] enable telnet from a remote machine.
=>
=>
=>I have in
I have installed Mandrake 7.2 in all three modes, and since I will be doing
some Java development, I ended up using the Developer install. I love the
install and almost everything works great, however, I cannot Telnet in to
the box from another machine. I did start the service, however it didn't
I also had this problem with my initial install of Mandrake 7.2. Make
sure that you have the telnet server installed. Type "rpm -qa |grep
telnet" and see if you have both the telnet and telnet server rpms
installed. I then had to install the proftp rpm to get the ftp server
running. My la
Hello Becky! Welcome to the "club." :0)
Well here goes my crack a your issue.
Somebody already answered saying that it's best to go with a full
install, and I'm going to have to agree. I have NOT run an upgrade
from lower version # of the OS to the "Latest & Greatest." I've
always backed up s
Hi all,
Is there a way to save the packages selected during an expert install of 7.2,
so that if you install again, you don't have to make all those selections all
over again ? If the option is there, I keep missing it.
The auto-install feature is not feasable to use on a multi-boot workstatio
On Monday 11 December 2000 00:52, you wrote:
> Hi, I have mdk 7.2. I burned my own ISOs and installed
> it. It is all updated through mandrake update, and I have
> it all set up with the internet just fine.
> However, I have explored the CDs from crappy
> macmillan walmart mdk7.2.on which
> I foun
please edit the file /etc/inetd.conf using the gedit on the Startx or
any other editor.
Go down the file and u will find an entry pop2 etc etc and another line
below it starting with pop3 etc etc
These two lines will be commented. Please remove the comment on the line
starting with pop3 etc etc
Hi,
I installed LM7.2 using the normal workstation (i.e not server) method,
and it seems to not have enabled pop3 by default. At least, when users
go to check their email from another machine on the network, they are
getting the message "server unexpectedly terminated the connection". I
can
Hello
I don't pay internet en the meddle night, so I want to right some
script
that do it form this every night, this mean connect with the pppd daemon
(
I think ) and put the message in some temporary local Inbox in order to
take
this in the morning with my netscape. This is possible???
I am trying to reconnect jpilot to the Palm Pilot after a hard reset and get
the message"use pilot-xfer to restore the palm and install-user to add a
username and user id to the palm". Can anyone tell me in simple terms how
to go about this?
Barry Orton
57 matches
Mail list logo
