michael wrote:
>
> I was quadribooting for awhile (NT,98SE,RH,MDK7.2).
> Make sure windows is on first.
> -m-
>
> Jon Doe wrote:
>
> > I currently run Win98SE and Linux Mandrake 7.2 and things work just fine, but
> > I would like to also run Red Hat. Is triple boot a bad idea? If not what i
Jon Doe wrote:
>
> I currently run Win98SE and Linux Mandrake 7.2 and things work just fine, but
> I would like to also run Red Hat. Is triple boot a bad idea? If not what is
> the best way to install all three?
>
> --
>
> linux: because a PC is a terrible thing to waste
Get System Commander 2
Hello All,
Thanks for all of the information. In response to your question Dan, I'm using the
internet on one PC. I have a cable modem. Running static, not DHCP. Just got it
working. Does this answer your questions? Let me know.
Thanks for your help!
Chuck
Hello folks,
I have an WO2 mother board, with a Quantum 30 Gb ATA 66 (hda) with two
windows partition and a second harddrive Seagate ATA 100 (hdb) with two
mandrake system installed, MDK 7.2 (working fine, including Epson USB
scanner, CDrwriter, DVD -with xine I could see splendid dvd-movies-
I dunno, but it should be:
ide2=0x01f0,0x0400 ide3=0x0170,0x0380
Beware, this is from memory, not from fact as I don;t have an IWill board.
Regards,
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Stephen Liu
> Sent: Friday, March 16, 2001 4:0
Marcia
When you hava vmware running on any Linux platform, is as if you had another
machine. If you want to share data from Linux to your vmware or viceversa
you need to use SAMBA. It emulates the protocol used to share data in a Win
network. If you are also new to samba, you can go to www.ore
subscribe newbie
I am not completely sure but it might be related to the environmental
variable KDEDIR.
Eric Indiogine
On Friday 16 March 2001 13:20, Jon Doe wrote:
> I have QT 1.44 and QT 2.2.1 or whatever it is. How do I direct programs
> (RPM or ./configure) to the QT2? If I try to install an rpm that requir
Dear All, I now have vmware running Windows 95 on my LM 7.2 which is
great. Thanks to the help of some of those here. Now, I would like to
share files between the two. Does anyone know how to do this? I am quite
a newbie in this area. Any help will be greatly appreciated. Thank you,
Marcia
I know your feeling. I bought Linux4Windows despite many warnig against it because Linux would run faster on its own partition, which is true, or they are very anit-Windows which is the impression I got from them. On my laptop the CD boots from the CD drive. I could never get pass the dowloading
I have QT 1.44 and QT 2.2.1 or whatever it is. How do I direct programs (RPM
or ./configure) to the QT2? If I try to install an rpm that requires qt2 I
get unsatisfied dependancies, if I try to build from source I get the can't
create small programs qt2 not found. I did an rpm -q for qt2 and it
Greetings!
Do I have to uninstall KDE 2.0.1 first? Do I have to use one --force
--nodeps?
I modified my list:
0. mv .kde .kde_old
> 1. telinit 3 and su - root
> 2. rpm -Uvh qt2*.rpm
> 3. rpm -Uvh lib rpms
> 4. rpm -Uvh the rest of the rpms
> 5. rebuilddb
> 6. rpm --rebuilddb
> 7. update-menus
Can anyone explain
a) Why the following messages result when starting up VNC:
xrdb: No such file or directory
xrdb: can't open file '/root/.Xresources'
/root/.vnc/xstartup: xterm: command not found
b) How to start up KDE instead of the default twm. Using 'startkde' I get a
whole raft o
Greetings!
I am downloading the Mandrake 7.2 KDE 2.1 rpms from
ftp.kde.org/pub/kde/stable/2.1/distribution/rpm/Mandrake/7.2/i586
The rpms are dated 2001-03-05.
I would like to kow if there are any special instructions on how to install
them.
This is my plan:
1. telinit 3 and su - root
2. rpm
** Reply to message from Graham Watkins <[EMAIL PROTECTED]> on Wed,
14 Mar 2001 09:07:53 +
In the process of following my own instructions and testing how to do this
right, I created the same problems with my Zip drive that you have with your CD
drives. Still working on it - Andy
Hi Paul, sorry for this late reply.. Can't find your email-addy, so i send
this to this list for all the world to see :)
Joystick setup in the vice is very easy. For the unix/linux versions, just
hold the _right_ mouse-button (the left pops up a load-menu), choose joystick
setup from the popup
Forever never goes beyond tomorrow.
> -Original Message-
> From: Stephen Liu [mailto:[EMAIL PROTECTED]]
> Sent: Friday, March 16, 2001 7:05 AM
> To: Charles A Edwards
> Cc: [EMAIL PROTECTED]
> Subject: Installation of Mandrake7.2 on ATA 100 hard disc
>
>
>
> Hi Charles,
>
> Could you pl
i have also messed with SANE a bit. no luck.
at the moment i'm just letting it slide.
my scanner isn't fully supported by linux yet anyhow, so i still have to use win to
make full colour scans.
hopefully soon SANE will be more idiot proof and i'll be able to figure it out.=)
Adrian Smith
'd
At 02:50 16.03.2001 -0800, you wrote:
>Hi,
>
>The auto login works for me on 7.1, even though it was
>designed for 7.2!!
>
>Ok?
>
>Thomas Adam
>
>-
hmm..shouldnt autologin install a /etc/sysconfig/autologin file
?..i installed 1.0.0-3, it had only 8 kB (is this possible ?),
but i dont h
Often brightness problems occur because you havent specified the correct
monitor in setup. Try the similar ones until you get a satisfactory result.
--
Microsoft is not the answer, its the question.
And the answer is no. www.badran.co.uk
Graham,
> I've tried to use Sane under MDK 7.2 but with no luck so far.
> It tells me that no sane devices are detected.
> I have a Plustek 9630 parallel port scanner and there appears
> to be a Plustek back end. Is there anything I need to configure
> to get a result?
Though it didn't work
howdy -- if i understand you correct, you want to take an existing fat32 and convert
it to ext2, yes?
i have done this in the following way --
run diskdrake and find out exactly which partition i'm dealing with, such as hda4
then i used diskdrake to change the partition type (fat32 to ext2) the
Telnet don't have this utility. For this you need have a ftp connection.
Julio Gutierrez escribió:
> does anyone know how I can copy files from a Win2k telnet server to a linux box?
> or is this possible? if anyone knows pls let me know
> Thanks in advance
>
> Julio
--
Édison Andrés Rivera Nor
varun
The Linux4Win can be installed on your Windows FAT partition by
inserting the CD once ME has booted to the desktop. ME will execute the
autorun file and give you the option to install Lin4Win on a certain part of
your FAT partion. Using a boot disk and the CD will excute an actual LINUX
On Thursday 15 March 2001 12:42 pm, Adam Baxter wrote:
> Yet that's the wierd thing, I shouldn't have SCSI on my computer..the
> commands came with the origional kernel on Madrake 7.2. How would I turn
> the SCSI emulation off?
Usually the line append=" hdd=ide-scsi" is in there to accomod
Hi Charles,
Could you please throw me some light re installation of Mandrake 7.2 on ATA
100 hard disc
I'Will WO2 onboard controller
From MSWindows > Settings > Control Panel > System > Device Manger >
Storage Contoller > Resources, following data were found :
a. Input/Output Range 01F0 -
Hi all people,
Re Installation of Mandrake 7.2 on ATA 100 hard disc
I'Will WO2 onboard controller
From MSWindows > Settings > Control Panel > System > Device Manger >
Storage Contoller > Resources, following data were found :
a. Input/Output Range 01F0 - 01F7
b. Input/Output Range 03F6 -
Well I haven't been able to get my Dlink USB 10/100 ethernet card to
work in Linux. It works fine in Windows though. There is a driver
called Pegasus (I think) that is supposed to work but I haven't been
successful and haven't been able to get any help on it here.
Wilson
-Original Message-
Renaud,
You can get the information you're looking for by using this neat little
command.
du -h --max-depth=1
Example:
du -h / --max-depth=1
give it a try...you'll love it!
Mark
Renaud OLGIATI wrote:
>
> Hi all,
>
> I've been trying to find a way to get, for each sub-dire
I am using tcp/ip. I'm in the process of setting up a proxy server, so I
needed something routable...
Moose
-Original Message-
From: Meph Istopheles [mailto:[EMAIL PROTECTED]]
Sent: Thursday, March 15, 2001 12:50 PM
To: '[EMAIL PROTECTED]'
Subject: RE: [newbie] read/write to and from NT
Dan LaBine wrote:
>
> [EMAIL PROTECTED] wrote:
> >
> > Hi,
> >
> > I've just downloaded pmfirewall. I have some pretty bad questions as I am a
>complete newbie. I want to get this up and running so that I can feel safe about
>getting on the net. My question is, after I unzip it where should
at site
www.google.com
type
"c/c++"+"sample"+"examples", or add others words,
"tutorial"+"libraries"+"openGL"+"HOWTO"+"alegro" etc, any thing related. you
will be moved to plents of links you will appreciate.
the path to learn c/c++ is not straight foward, some oscillation occur but
you
hi,
I upgraded cups to 1.1.6 yesterday and got the jobs printing again, I dont
have printpro installed, and no error were reported in software update
interface. I'm using KDE 2.0.1 yet. I curious stuff, in my system when the
printer stops working properly, I have to remove any printer configu
Hi Patrik,
Rightwhere to begin??? If you plan to upgrade to
Mandrake from Rehat, and you want to keep
configuration settings, the best thing to do, is to
back up you /etc folder, since this is the folder
which stores those configuration files. You may also
want to copy "/root" and "/home". Th
Hi,
The auto login works for me on 7.1, even though it was
designed for 7.2!!
Ok?
Thomas Adam
--- Quaylar <[EMAIL PROTECTED]> wrote: > heyho all
>
> does anybody know whether the autologin-package of
> 7.2 will also work on 7.1 ?
>
> --quay
>
>
=
Thomas Adam
Linux Co-ordinator for Th
heyho all
does anybody know whether the autologin-package of 7.2 will also work on 7.1 ?
--quay
Hi everyone.
I would like to migrate to Mandrake from RedHat but I need to keep all the
qmail,vmailmanager settings and users.
Now I wodner if there is any easy way to do this or do I have to install
Mandrake on a new disk and copy the whole mail system to the new disk?
/Patrik
I've tried to use Sane under MDK 7.2 but with no luck so far. It tells
me that no sane devices are detected.
I have a Plustek 9630 parallel port scanner and there appears to be a
Plustek back end. Is there anything I need to configure to get a result?
All advice welcome.
Graham Watkins
38 matches
Mail list logo