ks.
Think it this way
> direct to file
| direct to next command
So you want it to be mailled, you should
df | mail -s subject receivers_mail
If you want it both mailed and saved as a file, you can use tee ("man tee" for more
info)
df | tee /where/you/want/the/file/be
ry.
MV> Marco
Try running drakconf at the console, which will ask you the root
password.
Here you can change/reconfigure the display settings.
You dont need to reinstall.
Regards,
Onur Kucuk
_
Do You Yahoo!?
Get your free
ic)"
GS> VendorName "Unknown"
GS> BoardName "Unknown"
GS> Driver "nv"
---
change to Driver "nvidia"
---
GS> #VideoRam32768
GS> # Clock lines
Regards,
Onur Kucuk
__
suggest you check for the v4l stuff, and check if there is
an irq conflict, before changing dri modules in your mdk box manually.
Regards,
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Want to bu
bad, is the delay caused by the
floppy. To overcome this, boot your system, put in a fresh floppy,
open up "/etc/lilo.conf", change "boot=/dev/hda" (or something
similiar) to "boot=/dev/fd0", save, type "lilo" to make it write lilo
to the disk. It will mak
x27;t succeed.
ŁŁ> Can anyone help?
The reason may be that you dont have kernel source installed.
Check the software manager (rpmdrake) in flat view
Regards,
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at http:/
128MB
RK> SDRAM.
RK> TIA
RK> Roman
+1
Intel i845 board + 512 MB SDRam + Nvidia Geforce2MX
Exactly the same
Regards,
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
the ISO files. I used to mount ISO files on other OSs but
SA> not Linux.
SA> Can somebody please give me a hint?
SA> Thanks,
SA> Seedkum
mkdir /tmp/myisofile
mount /where-iso-is/mandrake-blahblah.iso /tmp/myisofile -o loop
Regards,
Onur Kucuk
e root image as stored on your
F> system.
F> Is that the only way to put the images onto diskette? Can I do it from a
F> windows machine?
F> THX
F> Femme
You can use rawrite (dos) or rawwrite (windows)
Regards,
Onur Kucuk
_
ic
nousb
noauto
etc.
Also if you can, try to upgrade your kernel, which usually helps.
PS: I assumed you dont have a hardware problem.
Regards,
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at http:/
PR> But this seems to stop my system in boot, and it just stays booting
PR> forever.
PR> - Paul
You better try it with sudo, instead of su
Regards,
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.
uggest you try with modprobe , instead of insmode.
To get more info about the module, check with modinfo
Regards,
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Want to buy your Pack or Services fr
yle" and translucency options.
Regards,
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
ed, when you upgrade
instead of install. Also, having a trustable kernel around is a good
idea, as the new kernel may somehow cause trouble.
To solve the trouble, you can use your mandrake CD's. Just boot from
the cd, choose to update (not install) your syste
Sunday, February 17, 2002, 2:38:50 PM, you wrote:
RT> On Sunday 17 February 2002 13:32, Onur Kucuk wrote:
>> RT> I'm sure this one must have been asked and answered before, but
>> I RT> can't find it in the archives
>>
>> RT> How do you get
cured
JR> Fatal: geo_comp_addr: Cylinder number is too big (1567 > 1023)
JR> anyone run into this problem trying to set up the boot manager
JR> also have windows 98 SE installed on the pc first
JR> thanks
Do you have a "lba32
lacking iso8859-9. To correct this, there is a
utility in the main folder of the office, spadmin. Spadmin manages
printers and fonts. Just open it up and show openoffice new truetype
(ttf) fonts to use, that supports iso8859-9. Choosing "use
symlinks/softlinks" wil
ready, untar it again, do ./configure (with
the options you used during installation) and then do the "make
uninstall".
If there is no uninstall rule for make, you will need to trace the
files tru Makefile.
Onur Kucuk
_
Do Y
GM> I am looking for a program that will translate German web pages into
GM> english while online. Google was not helpful. Any suggestions?
GM> Thanks,
GM> Gary
Konqueror :)
Check the tools menu. Though I dont remember from which version this
is included.
rom blackdown.org , sun.com, IBM.com. I personally
choose 1.4.0 beta from sun.
Regards
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
thats
just minor!
JD> Just my .02 cents.
Seems like you are using kde. Just open the sound server in kde
control center and disable arts. And all your troubles will be over
:)
PS: You may also need to disable the alsa services starting at boot.
(Mandrake control center --> sy
at. As they are not at the mbr, they are
not affected by lilo. When lilo boots C:, it boots nt loader, that is
the MS multiboot menu.
Regards,
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
e md5checksum to the iso images you downloaded ? Have you
tried to burn them at a much-slower speed ?
I guess your CD-Rom is getting old (or writer ?). The message comes when
your cdrom is not able to read your cd well, even if your cd is ok.
If the images you downloaded are ok
dows, (or in the console)
- telnet
telnet the_name_of_the_server
and you will be able to login.
- ssh
ssh -l your_user_name the_name_of_the_server
- for telnet, telnet client, for ssh, openssh must be installed in
your system. (you can find them in your mdk cd
rrupted, or your cdrom drive may
have trouble reading it.
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
t is wrong with it.
If it is the pid file just delete de licq.pid in "your home/.licq/".
If it is more, you can reinstall the licq rpms. that should fix.
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at http://
ent)
Instead of changing the default scripts, I suggest you add something
like
rm -f /etc/resolv.conf
cp /var/resolv.conf.ofmine /etc/resolv.conf
to the end of /etc/rc.d/rc.local
Onur Kucuk
_
Do You Yahoo!?
Get your free @yaho
ng that it was going to check "/dev/hdb1", which I'm
JJ> not sure is correct. Any further tips would be appreciated.
JJ> thanks,
JJ> Joe
Just tell the lilo in your boot disk "which partition is your root
(/) partition"
Say, if your "/" partition is /
ng too fast) if the drivers are set up correct.
I advice you check madnrakeuser.org, mandrakeforum.com and the
archives of this list, this subject has been discussed many times.
Onur Kucuk
_
Do You Yahoo!?
Get your free
Monday, January 14, 2002, 11:49:08 PM, you wrote:
MN> It has somebody there that it uses this?
tried but could not make it "execute" :(
any info will be welcome
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com ad
I
assumed its name is vmlinuz, and hda5 is your "/" partition.
- Do you have your linux "kernel", I mean the boot partition at
least, within the first 8 GB ?
- Is your hard disk set to LBA or normal mode in your bios ?
( if sector and head numbers are 255 and 15 it m
nk them :) to the proper place. The proper place has a small,
single *.pk* file, just check the folders.
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
IP address without
JD> rebooting the machine?
JD> Thanks in advance!
if eth0 is configured to use dhcp to get its ip etc., as root, do
ifdown eth0
ifup etho
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at http:
ere first
http://www.linux-mandrake.com/en/errata.php3
if none works, try passing these options to the installation kernel
noauto
noapic
nousb
ide=noautotune,noprobe
vga16
Like when you are booting your cd, type
linux noauto
or multiple comm
TR> Does anyone know if a 64MB GForce Graphics Card will work under Md 8.1
TR> without any problems?
TR> Trevor R.
TR> Campbelltown NSW AUS
TR> Registered Linux User #252240
Should work.
And I advice to use nvidia drivers for it. (www.nvidia.co
guez
Had you ever shut down your pc from linux "normally" ?
I have a p4 on i845 board and it does not shut down (o does but I dont
know how ) so it may not be supported.
Usually I would recommend you check your apm stuff, both in linux a
another email. Happy New Year to all.
DB> Dan B
You can change your /etc/lilo.conf with anything you like, mc, pico,
vi, adding lines with echo or changing from x windows.
But whatever you do, to make it work, you have to execute "lilo"
to make your changes written
. The machine, though, seems to be ignoring
everything. telnet to port 110 gave me nothing, also the nmap.
Up to here, nothing proves me hotmail has a pop server. Any other
ideas are welcome.
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.c
sible tru kmail etc If
so what is the POP3 adress ? ...
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
definition in /etc/hosts. Define your
ip (that is connected to the internet) as your host.name (that is
connected to the internet) above the line of your local line.
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at http://ma
es
56 Hz or 60Hz @ 1024x768.
If these tries wont work, the error output would be nice. Honestly I
never saw that error.
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Want to buy your Pac
operties etc.)
or at the console type
chmod +x the_name_of_your_bin_file
then run it. (double click, or at the console ./the_name_of_your_bin_file)
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
id's?
RB> thanxs..
RB> roy
Try passing "single" to kernel when you are booting. Like, if you are
using lilo, type "linux single" instead of "linux" at the prompt.
Onur Kucuk
_
Do You Yahoo!?
Get y
Luck
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
What may affect you, did you chage your boot sequence from your
bios? Did you have a previously installed cdrom at hdb, then removed
(or vice versa) ?
These are what I can think of now. If you give me more info, (how is
your boot sequence defined in your bios, what are your hd~ devices,
and their sizes, /etc/lilo.conf) I can help you about this.
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
ent
"styles" to be configured. Which modem are you trying to make work ?
What rpm did you use ?
Btw, many of the modems can not work with rpms, as they need to be
compiled against your machine.
Onur Kucuk
_
Do You Yahoo!?
G
hoose the 70 Hz one, as it seems to work on more
monitors, but if 74 works for you of course it is better.
Just find a generic monitor that gives you display, even if it is
ugly. Then you can use xvidtune to make the display look better.
Onur Kucuk
_
your mandrake root partition.
The trick is that "/boot" and "windows first partition" shall be named
as hda1 and hda2 (or vice versa) and that they are both limited to the
first 8GB. Rest will be managed by lilo and your OS.
For the slider, try the arrow keys on your k
hey dont seem to be updated for a few weeks,
since winehq anounced it as a usable version. (11.01 I guess)
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Want to buy your Pack or Se
so your system is not using
your nvidia cards hardware acceleration. Go to nvidia.com and
mandrakeuser.com and follow the instructions.
The fps in gears may be 250, but gears do alot less than tux racer so
it is normal. Actually, it is slow. Just install the drivers.
Onur Kucuk
__
eymap was not enough to fix it so it was
reported to XFree and fixed in new versions.
About July 2001 I had realized this and proper reports were sent to
Xfree, so I guess a version after that will be enough to fix it.
Onur Kucuk
_
Do
resolutions, to see what is available, and what
works better.
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
, but i686 were not yet. Maybe he
made them.
http://skyblade.homeip.net/xine/XINE-0.9.5
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
R> Is it possible to mount WinNt NTFS partitions in linux? If so, what is
R> the correct format to use in fstab? mount
/dev/hda5 /mnt/hda5 ntfs user,exec,umask=0 0 0
But keep in mind that writing to an NTFS partition is still
experimental. (It has been for long actually :)
Onur
afe to use ?
Could not try that yet
CD> Thanks for any help,
CD> regards,
CD> Charlie.
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
work ! But I guess there is a
misunderstanding.
When you upgrade your linux, aka the kernel, the
drivers you had installed previously will not work. All you need is to
re-install them so they will be using your new kernel.
Geforce 2mx works, I have no trouble, tried on
>>
>>mount -t iso9660 /dev/hdb /mnt/cdrom
>>will be the answer :)
>> Onur Kucuk
RCdOF> I've tried that too! ;-(
RCdOF> Oops! now I got it permissions problem!;-/
RCdOF> I think there is a problem with the links
RCdOF> When I eject the 'cd
searched and found several RPM packages that
> have this file in them,
> however all are older than what is currently being
> used with Mandrake 8.1. So,
> is there a way to remove that 1 single file from an
> RPM? I did a "man rpm" but
> didn't see anythin
o
/mnt/cdrom, and nothing is "already" mounted to /mnt/cdrom, the
correct command is
mount /dev/hdb /mnt/cdrom
I dont think you will even need to define the type, but if you will
want or need
mount -t iso9660 /dev/hdb /mnt/cdrom
will be the answer :)
Onur Kucuk
r 1.2.3.5
You can get these numbers from your isp, or if you have windows, use
winipcfg (write it at start --> run ) and note the DNS servers.
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Wa
find more info on gpm. If you will find the
proper command, you can change how gpm is started, in the file
/etc/rc.d/init.d/gpm
Sorry cant tell you where and how right now (have no linux-pc right now),
but these will show you the way I guess
Good luck
Onur Kucuk
correct path will solve the problem but you dont need
that. Go to the adress below and install the rpms.
http://skyblade.homeip.net/xine
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Want t
Is soundblaster audigy supported ? And do you advice to use it?
Thank You
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Want to buy your Pack or Services from MandrakeSoft?
Go to http
that stupidity confuses lilo...
hdc = 0x80 when I have hda. Nonsense.
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
n use the command c++
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
'll be able to dump WInblows for good!
http://skyblade.homeip.net/xine/XINE-0.9.2/
download the rpms and install them. Nothing more :)
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Want to buy you
their own UNIX (AIX) for long, and they spend
billions of $ for the penguin.
It is wise to see the future, and it is even wiser to catch the
technology. Those companies who ignore linux will regret it one day,
in a very bad day.
Onur Kucuk
And if things did not change, debian is the only distro that can support
the GNU's kernel, hurd.
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Want to buy your Pack or Services
How good can linux use p4's capabilities ? Is there a kernel version
you advice to upgrade to ?
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Want to buy your Pack or Services
ill be
developed fast, and will fix the troubles I believe.
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
port, usb etc. After all that, try different combinations
of pci slots on your board, after a few tries you will realize how
to solve your trouble.
Good Luck
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at ht
Can anybody send me a sample /etc/modules.conf (or at least the right
entries for it) so that emu10k1 works right.
After adding those lines and a reboot I guess I will only need to
change the sampling rate in arts.
Thanks
Onur Kucuk
Sunday, October 28, 2001, 4:19:01 PM, you wrote:
SN> How do I extract bz2 files from a console?
SN> Best regards
SN> Søren
bunzip2 the_file
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.
t to accelerate my mouse I add
Option "Resolution" "250"
in the /etc/X11/XF86Config-4 , in the mouse section.
Onur Kucuk
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Want to buy yo
in windows/x11drv/keyboard.c
and submit them
to us for inclusion into future Wine releases.
See the Wine User Guide, chapter "Keyboard" for more
information.
and it ran normally. Why not try other programs ?
Onur Kucuk
- wine . conf ---
WINE REGISTRY
t describes your preferences. (you can find an
example in /etc/wine I guess, but you must have the config in your
home directory to make it work ). As that config is not there, wine
could not find how( c:\blablabla\starcraft etc ) it should name your starcraft folder.
Onur Kucuk
__
on, of
course nothing changed.
There is only one thing that looks strange, when xinetd starts, even
if only one server is active, or none is, it starts very slow, though
it starts.
May someone show me how to accept telnet connections in my MDK 8.1 ?
At leas
on expert and newbie a while ago, and there was
no solution.
MDK 8.1 is not capable of telnet-serving
As far as you will be told, "use secure shell".
Though if it will be fixed anyhow, I will be glad to know too.
Onur Kucuk
_
libGConf1-1.0.4-2mdk
DJ> Is this my fault for trying to install from the 8.1 RPM's or should I be able
DJ> to do this?
Just put the necessary rpms to the same folder and do an
rpm -ivh *
Onur Kucuk
_
Do You Yah
partition not
mounted etc.
And also, if you dont want re-install your system,
if you can give us the name "which version" you have, and if you did
not change much in /boot , a copy+paste from a friend would be fine I
guess.
If it is MDK 8.1 I c
cceed" , this is because you used export instead of set, or vice
versa. ( dont worry, it wont hassle things :)
Onur
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
nestly, these are the detail things you can do.
I advice you try to run sndconfig in a terminal
window, before doing these manually, because it will
do these automatically.
ps: module means sort of driver.
goodluck.
Onur
__
Do You Yahoo!?
Yahoo! Photos - Share your holiday photos online!
http://photos.yahoo.com/
e ready, in case.
All I can think of , is the famous kernel < @1024 cylinder problem, but I dont
remember any other. (and this problem is fixed in new lilo, isnt it?)
Onur
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
ting to nvidia's files, not Mesa's .
These Should be enough to make the opther stuff work :)
Goodluck
MI> Meph
Onur
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
vers "all the time" , and will
work on the modules, only and only when you need them
This is optimizing the kernel :)
--
Best regards,
Onur
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
art
>> moduled to s> load so I could install the nvidia drivers I would be
>> delirious. s> -s
>>
>> You are welcome :)
>> Do you have an i815 board ? I came to that problem (agpgart and new
>> kernels) only on that one, and could not solve it anyhow
art
>> moduled to s> load so I could install the nvidia drivers I would be
>> delirious. s> -s
>>
>> You are welcome :)
>> Do you have an i815 board ? I came to that problem (agpgart and new
>> kernels) only on that one, and could not solve it anyhow
>&g
t problem (agpgart and new
kernels) only on that one, and could not solve it anyhow
Onur
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
/X11/X
ln -s /usr/X11R6/bin/XFree86 /etc/X11/X
will do the job. Goodluck
Onur
__
Do You Yahoo!?
Yahoo! Shopping - Thousands of Stores. Millions of Products.
http://shopping.yahoo.com/
89 matches
Mail list logo