Axalon wrote:
On Sat, 17 Jul 1999, Rhichard Barth & Family
wrote:
> Hey Axalon !
> Boy I'm always glad to get responses from you...(not that I'm mind
the rest)
> So your saying:
> / boot = 20 meg
> / = a lot of harddrive
then swap?
> swap
>
ey can't
"surf")
Your friend
Rhichard,
Axalon wrote:
> On Sat, 17 Jul 1999, Rhichard Barth & Family wrote:
>
> >
> >
> > Hello again "newbie Group"
> > Well I've got a new one, I just got a 13.0 gig WD hard drive for free, I would
&
Hello again "newbie Group"
Well I've got a new one, I just got a 13.0 gig WD hard drive for
free, I would like to use it all for Linux. I found that VMware uses it's
own partition inside the Linux partition, better(or it's easier) than to
use a second hard drive(Raw partition)
The only thing is
got to be one of the greatest sites there is.
I owe you guys.
I'll be back!
Rhich
"The Phoneless Guy"
Icq 8150164
>
> - Original Message -
> From: Rhichard Barth & Family <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Sunday
John Aldrich wrote:
Are you editing the file as "root"? If not, that's
a "system file" and only
"root" can edit it.
- Original Message -
From: Rhichard Barth & Family <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, J
Axalon wrote:
On Wed, 30 Jun 1999, Flight16 wrote:
> For anybody else having the problem I was of a huge error crashing
their system
> whenever the shutdown script tried to halt, it is because of the
power off command,
> like Axalon said, but the specific problem comes from the -p parameter
tha
Axalon wrote:
> On Wed, 30 Jun 1999, Flight16 wrote:
>
> > For anybody else having the problem I was of a huge error crashing their system
> > whenever the shutdown script tried to halt, it is because of the power off command,
> > like Axalon said, but the specific problem comes from the -p par
Flight16 wrote:
For anybody else having the problem I was of a huge
error crashing their system
whenever the shutdown script tried to halt, it is because of the power
off command,
like Axalon said, but the specific problem comes from the -p parameter
that tries to
power down your pc. This comm
What happened to the "Guy" with the Jaz drive?
I have had great success with both Jaz and LS120's with 5.3.
I don't have a Jaz right now for 6.0 but no problems getting a LS120
up and running...
If you would like my help I'm here.(I was away for the weekend)
and am now just starting to read
Linda and Mike wrote:
Hi,
I am going to be reinstalling again, but since our last install, we
updated our
system with a new motherboard, chipset to 450/100MHZ, and doubled our
RAM from
128 to 256. Can we make one swap partition size of 256 or do
we have to make 2
partitions of 128MG each?
Lind
I am currently using a ATI rage pro AGP w/8MB if this helps,
The only thing I found out was I didn't probe and selected 8MB.
So far so good
Linux Mandrake 5.3 Festin.
Just started to upgrade to RH6.0 and am downloading 1.1.1 as I speak
It seems as if RH6.0 supports more top end graphic cards(
You can configure Linux to allow X-Windows to run automatically at boot
time,
without the "startx" command. In this case, you'll have to login
through the KDM prompt (I believe this is what your looking for)
In order to do this, just edit the /ect/inittab file and replace
the line
id:3:initdefaul
You can configure Linux to allow X-Windows to run automatically at boot
time,
without the "startx" command. In this case, you will have to login
through the KDM prompt.
In order to do this, just edit the /ect/initab file and replace
the line
id:3:initdefault:
with the line
id:5:initdefault:
This
Yes !! thats what I ment too..I'm using the 550 driverswith
HP890cxi and so far it's working.
Bernhard Rosenkraenzer wrote:
On Sat, 29 May 1999, Hidong Kim wrote:
> Upon booting into 2.2.9 with the boot option
> 'append = "parport=0x378,5"' in lilo.conf, no printer is detected
by
ndows and Linux.
Linux & KDE would use up 600MB easy with a full install
Jose Alberto Abreu wrote:
Rhichard Barth & Family escribió:
> You did a "Work Station" install? did you set up your partitions and
> then did the "Work Station" If you do a "Work Stat
Is the lp enabled?
I found when I installed my 890cxi after going from 5.3 to 6.0 the
port became disabled and It locked my printer dr.
Hidong Kim wrote:
Hi,
I'm having problems installing a printer, HP DeskJet 870 Cxi.
I'm
running Mandrake 5.3. I had the printer working under kernel
2.2.6
wher
d up being to smallCustom is
the way to go...this way you can pick and chose your own settings and only
install what you needThen use fdisk or Disk DruidBeing a "Widows
user" also I find fdisk is best.
How big is your drive?
Jose Alberto Abreu wrote:
Rhichard Barth & Family
Guillermo Belli wrote:
> I think the swap is too little. I was running KDE on a Cyrix PR-120 with 16mb
> of RAM and 100mb swap and it worked fine. Only when I opened some 4 Netscape
> and two kvirc windows and also kfm the system started to slow down. So try
> making that swap partition bigger.
"SunLord, William Schweder" wrote:
Will i encounter any version conflicts or any other
problems if i upgrade my
rh 60.0 to mandrake 6.0?
I am currently upgrading from RH5.2 to Mandrake 6.0
so far so good...
I haven't had any hang-ups so farkppp was a little tricky
Rhich
8150164
19 matches
Mail list logo
