Re: [newbie] CD Read errors

2002-12-02 Thread Michael Adams
On Sun, 01 Dec 2002 17:05, Randy Kramer wrote: > On Saturday 30 November 2002 05:18 pm, Anne Wilson wrote: > > On Saturday 30 Nov 2002 9:00 pm, Randy Kramer wrote: > > > hdparm will let you set a slower speed for the cdrom. See > > > http://twiki.org/cgi-bin/view/Wikilearn/Hdparm. > > > > > > Unfo

Re: [newbie] CD Read errors

2002-12-01 Thread Randy Kramer
Good luck! I often have trouble with those high speed CDs -- one of the symptoms is that I hear them sort of cycle (either on and off or from a low speed to a high speed) -- I suspect that sometimes the software expecting to get something from the CDROM times out while the drive is accelerating

Re: [newbie] CD Read errors

2002-11-30 Thread Anne Wilson
On Saturday 30 Nov 2002 9:00 pm, Randy Kramer wrote: > hdparm will let you set a slower speed for the cdrom. See > http://twiki.org/cgi-bin/view/Wikilearn/Hdparm. > > Unfortunately, hdparm did not seem to be installed "by default" in my > Mandrake 8.2 or 9.0 installations, but I'm assuming it's av

Re: [newbie] CD Read errors

2002-11-30 Thread Randy Kramer
hdparm will let you set a slower speed for the cdrom. See http://twiki.org/cgi-bin/view/Wikilearn/Hdparm. Unfortunately, hdparm did not seem to be installed "by default" in my Mandrake 8.2 or 9.0 installations, but I'm assuming it's available somewhere on the installation CDRoms (or from somew

Re: [newbie] CD Read errors

2002-11-27 Thread Stephen Kuhn
On Wed, 2002-11-27 at 14:52, Michael Adams wrote: > Whoa - We are dealing with a brand new machine put together commercially for > linux. If we can't get this working on the list, then the box goes back to > the store for them to replace the CD-ROM. > I just saw a utility on either: http://www.

Re: [newbie] CD Read errors

2002-11-26 Thread Michael Adams
Whoa - We are dealing with a brand new machine put together commercially for linux. If we can't get this working on the list, then the box goes back to the store for them to replace the CD-ROM. Meanwhile i am checking for suggestions. The suggestion about checking if it will read other disks wa

Re: [newbie] CD Read errors

2002-11-26 Thread Technoslick
I, for one, have no need for anything that fast. If I was using the drive to house a massive data store, and needed to access that from a program in a timely manner, I could see the benefit. Still, I think that such a need is a very small percentage of users. This is where marketing hype gets in th

Re: [newbie] CD Read errors

2002-11-26 Thread JoeD
In some cases the problem may be the cd label but a recent article that I had read (don't remeber where) had put the blame on the way that the newer faster drivers clamp and hold the cd's by putting the blame on poor mechanical design. The comment was to use a better quality lower speed drive.

Re: [newbie] CD Read errors

2002-11-25 Thread Michael Adams
On Mon, 25 Nov 2002 20:50, Ron Bouwhuis wrote: > --- Stephen Kuhn <[EMAIL PROTECTED]> wrote: > > On Mon, 2002-11-25 at 16:05, Michael Adams wrote: > > > Following the "First -Suspect Me" Thread with > > > > interest. > > > > > My Case... > > > Brand new store bought V9.0 pre-installed > > > > compu

Re: [newbie] CD Read errors

2002-11-25 Thread FemmeFatale
At 11:50 PM 11/24/2002 -0800, you wrote: > Why not try using hdparm to change/modify the > buffering on the device? > Make sure it's using DMA and it's using the proper > PIO/XFer modes... > (i.e. hdparm -X70 -d1 -p4 /dev/hdb ) ??? > > Give that a go before getting purchase-crazy... > > PS: I

Re: [newbie] CD Read errors

2002-11-25 Thread Technoslick
I agree with John in that peeling material off the back of a CD can be hazardous to it. The backing material must be 100% intact at all times. If the coating should be worn, dissolved (from peeled off glue) or scratched, the laser will pass through instead of reflecting off the backing. The result

Re: [newbie] CD Read errors

2002-11-25 Thread John Richard Smith
Ron Bouwhuis wrote: --- Stephen Kuhn <[EMAIL PROTECTED]> wrote: On Mon, 2002-11-25 at 16:05, Michael Adams wrote: Following the "First -Suspect Me" Thread with interest. My Case... Brand new store bought V9.0 pre-installed computer. It has a 52x CD on hdb (fstab wa

Re: [newbie] CD Read errors

2002-11-24 Thread Stephen Kuhn
On Mon, 2002-11-25 at 16:05, Michael Adams wrote: > Following the "First -Suspect Me" Thread with interest. > > My Case... > Brand new store bought V9.0 pre-installed computer. > It has a 52x CD on hdb (fstab was set up for hdd but i corrected that). > The supplied disks are recorded download edit

[newbie] CD Read errors

2002-11-24 Thread Michael Adams
Following the "First -Suspect Me" Thread with interest. My Case... Brand new store bought V9.0 pre-installed computer. It has a 52x CD on hdb (fstab was set up for hdd but i corrected that). The supplied disks are recorded download edition 9.0 40x recordable. The disks have an envelope address siz