Hoyt Bailey wrote:
I have a USR 5610B works great. If you have wvdial.conf use it
otherwise run setserial (CLI). The U.S. Robotics 5610 is compatable
with Linux.
I went through all 8 choices on the Mandrake Control Center/New
Connection. It hesitates before presenting me the 8 choices proba
On Thursday 08 April 2004 01:17 pm, Olwë Melwasúl wrote:
> I would be very angly if my expensive USRob modem was not Linux
> compatible. I looked in the Mandrake Control Center/Hardware and it sees
> "US Rob/3Com PCI 56k faxmodem Model 5610". I tried to run scanModem, but
> it errored-out "/dev/mod
On Thursday 08 April 2004 15:17, Olwë Melwasúl wrote:
> I would be very angly if my expensive USRob modem was not Linux
> compatible. I looked in the Mandrake Control Center/Hardware and it
> sees "US Rob/3Com PCI 56k faxmodem Model 5610". I tried to run
> scanModem, but it errored-out "/dev/modem
I would be very angly if my expensive USRob modem was not Linux
compatible. I looked in the Mandrake Control Center/Hardware and it sees
"US Rob/3Com PCI 56k faxmodem Model 5610". I tried to run scanModem, but
it errored-out "/dev/modem symbolic link not set; lspci not found please
install pciu
Seems PCMCIA is broken. Have same problem with a wireless card. Will
investigate.
Hannes
- Original Message -
From: "Olwë Melwasúl" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, April 08, 2004 4:36 AM
Subject: [newbie] MD10 can't see stuff
On Wednesday 07 April 2004 07:36 pm, Olwë Melwasúl wrote:
> Hello,
>
> I installed a community download version of 10 and the install seemed to
> go smoothly. However, I cannot get it to recognize my US Robotics 56k
> PCI modem. On the WinXP side (if I can get MD to work Win goes!), the
> modem is
Hello,
I installed a community download version of 10 and the install seemed to
go smoothly. However, I cannot get it to recognize my US Robotics 56k
PCI modem. On the WinXP side (if I can get MD to work Win goes!), the
modem is at COM4, INT10. I've tried sticking this into the system
hardware
