GReetings crew!
I have the misfortune of having a Windoz style multi-purpose device
(actually, it's not that bad), the HP PSC750XI. It is connected by USB
directly to the PC, and was discovered and configured (what seemed to be)
correctly during a recent Mdk8.1 installation- but doesn't print
Dear All, I finally have my Epson Stylus Color printing now that I added xpp,
however the quality is horrrible. The colors are fine but the B&W has banding
through the letters. I have it configured with the cups+gimp print at
adaptive hybrid, 360 dpi, and photograph. I tried 720 but that did no
Dear All,
I am sending this again since I sent it hours ago and it never showed up on
the list it seems.
My Epson Stylus color printer does not work at all now. I installed the new
cups , I did a test page which printed but had alot of bands with the black &
white print. I was able to finally
Dear All,
My Epson Stylus color printer does not work at all now. I installed the new
cups , I did a test page which printed but had alot of bands with the black &
white print. I was able to finally use the calibration for Epson but I cannot
print anything other than test pages and calibration
Thanks for your input Sean. I have an Epson 777, that I read is essentially
the same as a 680, and had used 680, 760 & 860 drivers in past with success
(before the addtion of 777). The 777 and others were real bad, while the 680
were only little better. I had never had to play around with th
On Monday 21 May 2001 21:10, Marcia Waller wrote:
> Dear Lanman and All, Thank you for the ftp site and suggestions. I did get
> the new cups. How would I check to see which version of cups is running
> now?
>
> Run the updates first, and delete your Epson printer, then do
>
> > a fresh config fo
Dear Lanman and All, Thank you for the ftp site and suggestions. I did get
the new cups. How would I check to see which version of cups is running now?
Run the updates first, and delete your Epson printer, then do
> a fresh config for the printer. Assuming that Mars and Venus (?) are in
> prope
On Sunday 20 May 2001 15:06, Marcia Waller wrote:
> On Friday 18 May 2001 20:12, s wrote:
> > Well, Marcia, I think we ought to quit wasting ink. Seems our Epson
> > printers are also broken in 8.0. Mandrakesoft is being a little too
> > quiet about these problems people are having. Anyway, our
Marcia; I've read about your problem, and I'd like to offer the following
suggestions:
1) Go to the ftp site below, and download ALL the files to a separate folder,
then run the software updater in Mandrake control Center. It's a fast site,
and usually not busy.
ftp://ftp.twoguys.org/pub/l
On Friday 18 May 2001 20:12, s wrote:
> Well, Marcia, I think we ought to quit wasting ink. Seems our Epson
> printers are also broken in 8.0. Mandrakesoft is being a little too quiet
> about these problems people are having. Anyway, our choices - buy a HP, go
> back to 7.2, or do without a pri
Hi Marcia,
I had the same problem with my Epson Stylus Color 600 printer producing
severely "banded" text output when I upgraded to LM8 from LM7.2.
Moreover, there were also very long and painful pauses during the
printing process - which were absent in LM7.2. I also use the CUPS+GIMP
driver.
Well, Marcia, I think we ought to quit wasting ink. Seems our Epson printers
are also broken in 8.0. Mandrakesoft is being a little too quiet about these
problems people are having. Anyway, our choices - buy a HP, go back to 7.2,
or do without a printer until maybe it's fixed in 8.1.
P.S. I
Marcia,
Is that an ink jet printer? Did you have it out of service very long
while you upgraded from 7.2 to 8.0? Is there any chance a cartridge has
clogged up? Do you have another computer that you can use to test the
printer?
Just some things to check.
Randy Kramer
Marcia Waller wrote:
>
On Wednesday 16 May 2001 19:49, Marcia Waller wrote:
> Dear All,
>
> I just installed LM 8 after having LM 7.2 for awhile. I am having some
> problems getting decent printing quality with my Epson Stylus Color
> printer. I am using the cups + gimp printer driver which worked great in
> 7.2. I have
Dear All,
I just installed LM 8 after having LM 7.2 for awhile. I am having some
problems getting decent printing quality with my Epson Stylus Color printer.
I am using the cups + gimp printer driver which worked great in 7.2. I have
tried to adjust the resolution, etc, but nothing has helped
15 matches
Mail list logo