Axalon Bloodstone wrote:
> it says the ne2k-pci doesn't accept an irq, you'll need to tell your bios
> to assign it an irq, somecards have a tool to set this also. What flavor
The problem has been resolved. The cause was that "Plug-n-Play OS" was
set to "Yes" in the BIOS. Thanks for th
On Wed, 22 Sep 1999, Dan Brown wrote:
> From: Axalon Bloodstone <[EMAIL PROTECTED]>
>
> > Well, obviously i wasn't fully paying attention i said options ne. No like
> > it says the ne2k-pci doesn't accept an irq, you'll need to tell your bios
> > to assign it an irq, somecards have a tool to set
From: Axalon Bloodstone <[EMAIL PROTECTED]>
> Well, obviously i wasn't fully paying attention i said options ne. No like
> it says the ne2k-pci doesn't accept an irq, you'll need to tell your bios
> to assign it an irq, somecards have a tool to set this also. What flavor
> is the card anyway?
On Wed, 22 Sep 1999, Dan Brown wrote:
> Axalon Bloodstone wrote:
>
> > it can't get irq0, specify it in your conf.modules 'options ne irq=X'
>
> This sounded good, so I tried it. The module is ne2k-pci, so I added
> "options ne2k-pci irq=10" to conf.modules. Now, it says "invalid
> para
Axalon Bloodstone wrote:
> it can't get irq0, specify it in your conf.modules 'options ne irq=X'
This sounded good, so I tried it. The module is ne2k-pci, so I added
"options ne2k-pci irq=10" to conf.modules. Now, it says "invalid
parameter irq". Checking Don Becker's site, it appears
On Sun, 19 Sep 1999, Dan Brown wrote:
> I'm installing Mandrake 6.0 on a Compaq Presario 4504, and I'm running
> into two problems which are rather distressing. In short, it won't
> communicate with the NIC or the modem. First the NIC problem. At
> system boot, it says it's bringing up e
I'm installing Mandrake 6.0 on a Compaq Presario 4504, and I'm running
into two problems which are rather distressing. In short, it won't
communicate with the NIC or the modem. First the NIC problem. At
system boot, it says it's bringing up eth0, and it gives a green "OK"
indicating tha
