I am about to install Mandriva Linux as a dual boot with XP Pro. Before I
jump in, I would like to make sure I am doing everything correctly. I have
a Pentium III 800mhz w/500MB RAM and three hard drives: 40GB, 110GB and
200GB. Here are my questions:
1.Is it best to install XP and Linux
Hey guys ..
just a quickie .. I hope.
I've installed mandrake 9.0 on two machines .. the first one has almost the
same as the second.
I thought I've chosen all the same information on startup, but there's one
difference on the 2nd machine I need to get working.
There seems to be some commands m
On Sun, 29 Sep 2002, Mark Berkwitt wrote:
> I know this should be so simple, but Mandrake just doesn't get it.
> eth0 using tulip is connected to my cable modem. I have it set to dhcp as it
> should. On installation I have 2 nics. eth1 is for a nic I plan to use in
> the future, but it's not conn
g.net
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Mark Berkwitt
> Sent: Sunday, September 29, 2002 10:59 PM
> To: Newbie-Mandrake
> Subject: [newbie] New install of Dolphin, can't config nic to cable
> modem.
>
>
&
mån 2002-09-30 klockan 08.35 skrev Mark Berkwitt:
> Then you chose the 'network' option when mandrake install asked for you to
> cofigure eth0?
Eh, not sure, probably. I do remember it said "lan" though, but I used
the installer in Swedish and don't know what minor differences in
wording there ma
Then you chose the 'network' option when mandrake install asked for you to
cofigure eth0?
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Bo Rosén
> Sent: Sunday, September 29, 2002 11:34 PM
> To: [EMAIL PROTECTED]
&g
mån 2002-09-30 klockan 05.59 skrev Mark Berkwitt:
> I know this should be so simple, but Mandrake just doesn't get it.
> eth0 using tulip is connected to my cable modem. I have it set to dhcp as it
> should. On installation I have 2 nics. eth1 is for a nic I plan to use in
> the future, but it's n
I,m running 9.0 with the same setup I use two nic,s
because I use it both ways on cable modem.Mine came right
up ,the one not connected fails. Joe
> I know this should be so simple, but Mandrake just doesn't get it.
> eth0 using tulip is connected to my cable modem. I have it set to dhcp as it
> s
I know this should be so simple, but Mandrake just doesn't get it.
eth0 using tulip is connected to my cable modem. I have it set to dhcp as it
should. On installation I have 2 nics. eth1 is for a nic I plan to use in
the future, but it's not connected for now. During install I specified to
use et
--- [EMAIL PROTECTED] wrote:
> - I have also been trying to use msn messanger
> threw samba sharing to a
>couple of windows machines. the chatting works
> fine but if you try to
>use voice or video instead of typing it does not
> work?
>
> If you have any ideas or can direct me to wher
I have been running mandrake 8.0 until recently and have had fairly good success with
it. I recently formated and did a fresh install of the newest version 8.2 (I
think:)and everthing went well except for 2 things perhaps someone could help me out
for I am new at this!
- I have been hosting
I just installed my Mandrake 8 disk, and I get messages in
/var/log/messages that say modules cannot be loaded, kernel isn't module
enabled, etc. I can't even post my messages file because I can't get
online without ppp. It was working fine before, I reinstalled because I
downloaded the seco
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, May 16, 2001 1:37 AM
> To: mandrake newbie
> Subject: [newbie] New Install, can't find CD
>
>
> Ok, this is so bad it hurts.
> I'm trying to load Mandrak
Ok, this is so bad it hurts.
I'm trying to load Mandrake 8.0 on an older box (an aging 75mhz
Pentium), to set up as a firewall box.
I've run Linux on it in the past, but it's been retired for a year or
so.
Anyway. I have to boot it from a floppy (it won't boot from a CD). So I
made the floppy, a
l Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Owens, Blaine C
Sent: Sunday, 25 February 2001 4:02 AM
To: [EMAIL PROTECTED]
Subject: [newbie] New install - Xwindows
After a new install my Xwindows has horizontal lines making most
applications INCLUDING DrakConf app
On Sat, 24 Feb 2001 15:01:32 -0500
"Owens, Blaine C" <[EMAIL PROTECTED]> wrote:
> If anybody who is not a smartass can give me a clue as to how to
> correct my
> Xwindows problem then I think I can figure the rest out for myself.
>
> The card according to Windows Device Manager is Trident
On Sun, 25 Feb 2001 07:01, Owens, Blaine C wrote:
> After a new install my Xwindows has horizontal lines making most
> applications INCLUDING DrakConf applications basically unusable.
> Perhaps if I could get Xwindows working reasonably I could address
> some of the other problems I am having. I r
After a new install my Xwindows has horizontal lines making most
applications INCLUDING DrakConf applications basically unusable. Perhaps if
I could get Xwindows working reasonably I could address some of the other
problems I am having. I reinstalled this morning - still horizontal lines
making mo
On Sun, 25 Feb 2001 02:07, Owens, Blaine C wrote:
> Last night I bit the bullet and installed Mandrake 7.2 dual boot
> with Windows 98. I've got a couple of problems and a question .
>
> 1) Xwindows comes up with horizontal lines across the screen. You
> cannot even read some apps because of these
Yep .. u have to install them
- Original Message -
From:
IRoKd
To: [EMAIL PROTECTED]
Sent: Wednesday, December 27, 2000 10:25
AM
Subject: [newbie] new install
Hey I have a couple of questions here if you
please:
When I installed the new 7.2 I
Hey I have a couple of questions here if you
please:
When I installed the new 7.2 I got several
errors about unzipping or uncompressing files (I did the full
shabang-3.5gig). None of them seemed to be anything of importance.
Is this normal?
Is it standard that the telnet and SSH serve
Hi,
I have one more question for those of you in the know. I have tried once
again to find this in the help file first and could not find it. I have ver
7.2 on my dell inspiron 3700 laptop. It has a built in usb port, and I have
a usb zip drive. How do I may it work? Drakz finds the usb
Hi Bob,
If you are running KDE2, the themes aren't there anymore - KDE2 doesn't do
themes as it did in KDE1 :-(
There is a tool to import old themes (found in Configuration -> Other ->
Legacy Theme Importer) , but I couldn't get it to work yet.
There are supposed to be KDE2 themes showing up
Hi All,
I just installed mandrake 7.2 on my dell inspiron lap top and it works great,
my question is, where are the themes. I was running mandrake 7.0, and really
like the themes, now there aren't any. I checked the help files but couldn'
t find out anything. Does anyone know where the them
New to the list and Linux.
I just bought Mandrake 7.0 and am attempting to install, and not having
much luck. The problem is that during the install, my PC keeps
re-booting. Each time a get a bit further in the process, then it
re-boots?? I have formatted my c drive, and have no Windows instal
ED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, August 27, 2000 4:50 AM
Subject: [newbie] new install
> Macmilan Software,
>
> Hi I just purchased and registered Linux 7.1 Mandrake Complete today
> 8-26-2000. I am putting it on a custom built system. The problem I am
> having
Macmilan Software,
Hi I just purchased and registered Linux 7.1 Mandrake Complete today
8-26-2000. I am putting it on a custom built system. The problem I am
having is that when it see the CD-ROM and starts copying files the menu
never comes up as stated in the insulation and user guide on pg.
Sorry guys,
deleting some when reply, ok.
But I didn't wrote anything of that !!
Eric MC
Paul wrote:
>
> On Mon, 14 Aug 2000, Eric MC.D wrote:
>
> >> I just installed Linux (well actually I did it twice now) and I am having a
> >> fundemental problem. I think the problem is that my hardware con
yes...I saw that too *BIG grin* NT...BLAAh phooey!
--
Mark
** =/\= No Penguins were harmed |
** <_||_> in the making of this |
** =\/= message...| Registered Linu
audio card has an IDE interface. I think most every hardware
> resource is consumed, and other than the IDE "conflict" I don't see any
> conflicts. The IDE interface on the Sound Blaster is disabled in my Win98
> setup which is how I get by with that (I think).
>
> ---
-=PINE 4.21+Linux Mandrake 7.1=-
> -- Forwarded message --
> Date: Mon, 14 Aug 2000 19:46:12 +0100
> From: System Administrator <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: Undeliverable: Re: [newbie] New install
>
> Your message
>
> To: [EMAIL PR
<[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: Undeliverable: Re: [newbie] New install
Your message
To: [EMAIL PROTECTED]
Subject: Re: [newbie] New install
Sent:Mon, 14 Aug 2000 19:47:24 +0100
did not reach the following recipient(s):
[EMAIL PROTECTED] on Mon, 14 Aug 2
Have you tried using "sndconfig" on your sound card? That card is definitly
supported, and it's odd that it doesn't work.
> I just installed Linux (well actually I did it twice now) and I am having a
> fundemental problem. I think the problem is that my hardware configuration
> is wrong for both
TECTED]])0(
> http://nlpagan.net - ICQ 147208
> Registered Linux User 174403
> -=PINE 4.21+Linux Mandrake 7.1=-
> -- Forwarded message --
> Date: Mon, 14 Aug 2000 19:46:12 +0100
> From: System Administrator <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
&
ow I get by with that (I think).
- Original Message -
From: Eric MC.D <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, August 14, 2000 10:34 AM
Subject: Re: [newbie] New install
> John Eichenberger wrote:
> >
> > I just installed Linux (well actually I did i
On Mon, 14 Aug 2000, Eric MC.D wrote:
>> I just installed Linux (well actually I did it twice now) and I am having a
>> fundemental problem. I think the problem is that my hardware configuration
>> is wrong for both audio and modem. No specific devices show up for either
>> one. Not anymore any
John Eichenberger wrote:
>
> I just installed Linux (well actually I did it twice now) and I am having a
> fundemental problem. I think the problem is that my hardware configuration
> is wrong for both audio and modem. No specific devices show up for either
> one. Not anymore anyway. The secon
I just installed Linux (well actually I did it twice now) and I am having a
fundemental problem. I think the problem is that my hardware configuration
is wrong for both audio and modem. No specific devices show up for either
one. Not anymore anyway. The second time I installed EVERYTHING I had
I'm not sure if it'll work, but at the lilo prompt try doing "linux 1". I've
also heard you can boot off the install CD as a sort of rescue disk, so maybe
try that. I'm just tossing idea's out of my head.
> I just completed an expert install(even though I'm not) because I needed
> to make sure th
I just completed an expert install(even though I'm not) because I needed
to make sure that S3 Virge(I have an S3 Trio) package is installed
instead of S3 VGA that auto install costantly defaults to. And beside, I
wanted to minimize my server installation. The only problem is that I
made a rookie m
Actually, I don't have a problem with SC, because I didn't install LILO into the MBR.
SC boots up fine and finds the Linux ext partition, and can boot to that partition.
The problem that I'm having is the LILO boot. I saw that someone else on the newbie
list out there is having the same problem
If you have the boot utility disk (you should have made it installing system
commander ) just boot from the floppy. This will tell SC the computer's new
configuration and SC will be reset. This way you will see if there is any
problem with LILO or GRUB and if the partitions are bootable.
On Wed,
I just downloaded the new 7.1 and installed on my computer on the second hard drive.
I'm running:
Shuttle MB w/Celeron 500
128MB RAM
IDE/33
1 - 6GB IDE
1 - 8GB IDE
Voodo3 2000 AGP
5X DVD
ATAPI ZIP
Ensoniq Audio PCI
I configured a 5GB partition as the Linux partition in the first slot of the sec
Bob Schmidt wrote:
>
> Hi All,
>
> I hope you can help me out. i just installed mandrake 7.0 on my Dell inspirion
> 3700. Everything works fine, I really like this os. Except I have one
> problem, when ever I shut down the computer. When it comes to unmounting the
> drives, I get this error
Hi All,
I hope you can help me out. i just installed mandrake 7.0 on my Dell inspirion
3700. Everything works fine, I really like this os. Except I have one
problem, when ever I shut down the computer. When it comes to unmounting the
drives, I get this error message:
end request: I/O error
bd startup succeeded
smb: nmbd startup succeeded
..
EOF
- Original Message -
From: "Cameron Kerr" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, February 07, 2000 10:48 PM
Subject: RE: [newbie] New install... Network problems
> What is the output o
Rodney Fulk wrote:
>
> Hello, I have a problem that nothing I have seems to explain...
> I have a linux box running on an Asus P2B-S motherboard with 32 meg of
> memory, Celeron 300a, Diamond Stealth 2000 video card (Pci with standard S3
> chipset.), 8 Gig hard drive, LinkSys 10/100 Network card
What is the output of dmesg?
also /var/log/messages might offer some help.
You might also try using linuxconf to set hostname
-Original Message-
From: Rodney Fulk [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, 8 February 2000 4:22pm
To: [EMAIL PROTECTED]
Subject: [newbie] New install
Hello, I have a problem that nothing I have seems to explain...
I have a linux box running on an Asus P2B-S motherboard with 32 meg of
memory, Celeron 300a, Diamond Stealth 2000 video card (Pci with standard S3
chipset.), 8 Gig hard drive, LinkSys 10/100 Network card and a CD rom.
I have Linux Man
Hello All,
Okay i have installed a new mandrake 6.1 box i can
only use the console like on the pc i try and telnet to my box "port 23" and
check mail "port 110" and it rejects all ips on my network... it only
accepts the proxy port 8080 and sendmail port 25
i cant find anything in
info
in the boot record of your choice (1st or second HD)
Darcy.
- Original Message -
From:
DKunz
To: newbie
Sent: Monday, September 27, 1999 7:46
AM
Subject: [newbie] New install on second
hd -- advice please.
Hello,
I am trying to install MDK 6.0 on second
--On Monday, September 27, 1999, 6:46 AM -0500 DKunz <[EMAIL PROTECTED]> wrote:
>
> Hello,
> I am trying to install MDK 6.0 on second hard drive. It is a Western
> Digital 6.4 Gig hd. The first hard drive is a Maxtor 4.2 Gig. Does part
> of MDK 6.0 have to be on first drive? I have Partion Ma
Hello,
I am trying to install MDK 6.0 on second hard
drive. It is a Western Digital 6.4 Gig hd. The first hard drive is a Maxtor 4.2
Gig. Does part of MDK 6.0 have to be on first drive? I have Partion Magic 4.01
so moving partions around is easy enough, it also comes with BootMagic. I could
linux [[EMAIL PROTECTED]] said:
>I would like to install Mandrake 5.3 on a Toshiba Tecra notebook
>that is currently running Win98 on a FAT32 HD. I would actually
>like to remove Win98 and install only Mandrake. How can I do so?
During the install, use Disk Druid to delete the FAT32 partition
I would like to install Mandrake 5.3 on a Toshiba Tecra notebook that is currently
running Win98 on a FAT32 HD. I would actually like to remove Win98 and install only
Mandrake. How can I do so?
Thanks in advance for all your help.
- [EMAIL PROTECTED]
55 matches
Mail list logo
