-Original Message-
From: Richard Adams [mailto:[EMAIL PROTECTED]]
Sent: Friday, September 24, 1999 3:32 AM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] SCSI card not recognized at boot
If you simply use a conf option example from someone else make sure
that IRQ is not in use, if it is
On Thu, 23 Sep 1999, you wrote:
> I have a PEL-1600 Scsi card for my CDR. It is supposed to use the
> AHA152x module. I did some research on the net, and found that somebody
> was able to get it working using the following command
>
> aha152x=0x340,10,7,1
>
> unfortunately, I don't know where
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of
> [EMAIL PROTECTED]
> Sent: 23 September 1999 19:48
> To: [EMAIL PROTECTED]
> Subject: RE: [newbie] SCSI card not recognized at boot
>
>
> I'll put together a mail a bit
On Thu, 23 Sep 1999, you wrote:
> I'll put together a mail a bit later tonight on creating the relevent stuff.
> There are other ways to load the modules, but IMHO doing it the way i will
> describe is one of the tidiest and complete ways.
>
> It has to be said - is there another way of loading t
k?
Thanks,
Mark
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Thursday, September 23, 1999 12:12 PM
To: [EMAIL PROTECTED]
Subject: RE: [newbie] SCSI card not recognized at boot
If the 'aha152x.' line is in the conf.modules you shouldn't
A. Yacketta/958157/EKC)
Subject: RE: [newbie] SCSI card not recognized at boot
I don't know, how do I tell? This is all very new to me.
Mark
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Thursday, September 23, 1999 12:12 PM
To: [EMAIL PROTECTED
nal Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Mike Fieschko
> Sent: 23 September 1999 15:15
> To: [EMAIL PROTECTED]
> Subject: RE: [newbie] SCSI card not recognized at boot
>
>
> >>> "martin" == martin <[EMAIL PRO
>>> "martin" == martin <[EMAIL PROTECTED]> writes:
martin> If the 'aha152x.' line is in the conf.modules you
martin> shouldn't need it in lilo.
martin> Are you using an initrd image to specifically load it up
martin> on bootup ??
[snip]
No, no initrdxxx.img
>> My 1502
I don't know, how do I tell? This is all very new to me.
Mark
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Thursday, September 23, 1999 12:12 PM
To: [EMAIL PROTECTED]
Subject: RE: [newbie] SCSI card not recognized at boot
If the 'aha152x