hooks. He also modified his grip
accordingly.
Moreover club specs from back then were also different than today’s.
Enjoy your Sunday.
André
From: Davy
Sent: Saturday, August 06, 2016 12:58 AM
To: ShopTalk@mail.msen.com
Subject: Re: ShopTalk: Loft/Lie Question
@ Andre Cantin
Lies should
Greetings,
I have used mostly a Mitchell, for both, but that said 1 thing that hasn't
been mentioned is that loft adjustments can affect lie as can lie
adjustments affect loft.
When doing an adjustment especially if it's more than a degree or less,
always PRE check your loft and lie measure
.com [mailto:owner-shopt...@mail.msen.com] On
Behalf Of Davy
Sent: 5-Aug-16 2:14 PM
To: ShopTalk@mail.msen.com
Subject: Re: ShopTalk: Loft/Lie Question
Only a fool would not listen to Tom. You'd be hard-pressed to find a handful of
experts out there with his experience and knowledge. You can take wh
riday, August 5, 2016 2:14:50 PM
To: ShopTalk@mail.msen.com
Subject: Re: ShopTalk: Loft/Lie Question
@ Davy
It gets confusing. So many claims out there.
Dynamic lie fitting or ink line drawn to the back of the ball:
http://www.golfwrx.com/277293/the-best-way-to-fit-lie-angle/ or lie detector
fi
ve Longeway
To: shoptalk
Sent: Fri, Aug 5, 2016 8:57 am
Subject: ShopTalk: Loft/Lie Question
I have a question about loft/lie adjustments that I’m struggling with.
I’ve always been under the impression that you cannot use a “bending machine”
to take accurate loft lie measurements. You were to
As Old Schultz used to say: I know nothing, I hear nothing and I see nothing
From: Davy
Sent: Friday, August 05, 2016 2:35 PM
To: ShopTalk@mail.msen.com
Subject: Re: ShopTalk: Loft/Lie Question
@ Andre Cantin
Donald Trump is going to build a wall. Hillary turned over all of her emails.
And
André Cantin
Sent: Friday, August 5, 2016 11:22:50 AM
To: ShopTalk@mail.msen.com
Subject: Re: ShopTalk: Loft/Lie Question
That is what most experts say. However Mitchell claims otherwise. Take a look
at page 2 of the pdf:
https://www.mitchellgolf.com/pdfs/manuals/SAMI-MANUAL.pdf
Your STEEL
Wishon
Sent: Friday, August 5, 2016 11:07:49 AM
To: ShopTalk@mail.msen.com
Subject: RE: ShopTalk: Loft/Lie Question
Steve
You'll probably hear from others here who will tell you that you can do that
accurately. But I am here to tell you as a clubhead designer since 1986 and
from having cre
-Original Message-
From: Steve Longeway
Sent: Friday, August 05, 2016 11:27 AM
To: shoptalk@mail.msen.com
Subject: ShopTalk: Loft/Lie Question
I have a question about loft/lie adjustments that I’m struggling with.
I’ve always been under the impression that you cannot use a “bending
AM
To: shoptalk@mail.msen.com
Subject: ShopTalk: Loft/Lie Question
I have a question about loft/lie adjustments that I’m struggling with.
I’ve always been under the impression that you cannot use a “bending machine”
to take accurate loft lie measurements. You were to do adjustments on the
machine,
I have a question about loft/lie adjustments that I’m struggling with.
I’ve always been under the impression that you cannot use a “bending machine”
to take accurate loft lie measurements. You were to do adjustments on the
machine, then use a club gauge to test the “real” loft and lie of the
Sorry guys / gals wrong fourm.
RK
---Original Message---
From: [EMAIL PROTECTED]
Date: Wednesday, August 20, 2003 1:40:44 PM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: Re: ShopTalk: Loft & lie question
I was told by just every brain doc I've seen that
t: Re: ShopTalk: Loft & lie question
Dan,
I second what Al wrote about the accuracy. You don't need absolute readings as
much as you need relative readings.
About the stand, since you're looking at setting it into the floor, you might
want to think about getting a stand from Mitchell
Thanks Al.
--- Al Taylor <[EMAIL PROTECTED]> wrote:
> Dan,
> I would recommend that you build your stand so that
> when you have a club in
> place, and the bar attached, the grip of the bending
> bar is about where
> your hands would hang, or a bit lower. The reason
> being that you can
> con
Mark,
Thanks for the forward thinking. I do appreciate the
input.
I'm sure I'd figure this out on my own, after four
years and thousands of dollars.
Dan
--- Mark Fields <[EMAIL PROTECTED]> wrote:
> Dan,
> I second what Al wrote about the accuracy. You
> don't need absolute readings as
> much a
Dan,
I second what Al wrote about the accuracy. You don't need absolute readings as
much as you need relative readings.
About the stand, since you're looking at setting it into the floor, you might
want to think about getting a stand from Mitchell and then making an adapter to
fit the Golfsmith m
Dan,
I would recommend that you build your stand so that when you have a club in
place, and the bar attached, the grip of the bending bar is about where
your hands would hang, or a bit lower. The reason being that you can
control your pull and push easier with straight arms and use your body
w
I came across a Golfsmith Loft & Lie machine at a
price I could not pass up. (next one will be a
Mitchell)
Question: Rather than go through trial and error, at
what height is best to mount the machine on a stand
from the floor? I am 5'11" if that helps.
I'm planning on setting it directly to the
18 matches
Mail list logo
