On Mon, Feb 7, 2011 at 1:04 PM, Nauman Sulaiman
wrote:
> Hi ,thamks. The thing is I have configured all Us and none of them have a
> proxy entry only domain. In the initial case here though the UA=> A simply
> sends it to b...@wherever.com as it doesn't know address of B.
>
Even if you don't
Hi,
I have following doubts on usage of b=RR and b=RS attributes in SDP.
Assume that the SDP message sent from UA-A to UA-B includes b=RR:0 and
b=RS:0.
1. Does it mean UA-A media also has RTCP component, but only to send the
RTCP packet to UA-B?
2. How UA-A signals that it does not wish to se
Hello,
Is it allowed by PBX on customer premises for a SIP trunk to change the port
number on VIA header once 401 UNAUTHORIZED received from SBC (via call
controller) for an outbound call ? The UDP port initially was 15275 which was
changed to 5060 after 401 response.
Before 401 (origina
For what it is worth, rfc4291 section 2.5.2 indicates that the "unspecified
address must not be used as the destination address of IPv6 packets or in IPv6
Routing headers".
> -Original Message-
> From: Brett Tate
> Sent: Monday, February 07, 2011 7:10 AM
> To: 'bindukumari.r'; sip-implem
> What must be done when NULL IPv6 address in received
> in SDP c= line,
No MUST behavior has been defined for the situation; it is not a hold.
The UAS received a request to communicate with a non reachable/responsive
location. If the UAS responds prior to the connection attempt, the UAS wi
Hi ,thamks. The thing is I have configured all Us and none of them have a proxy
entry only domain. In the initial case here though the UA=> A simply sends it
to b...@wherever.com as it doesn't know address of B.
in the Refer-to case UA B is given an exact address to refer to but (with some
U
On Mon, Feb 7, 2011 at 12:42 AM, Nauman Sulaiman
wrote:
> Hi, situation is as follows
>
> 2 UA's A and B with private addresses communication with domain wherever.com
>
> A transfers B to Parking slot. Sometime later A retrieves B from parking
> slot. The Refer sent by proxy (at wherever.com) to
Hi Brett,
Could u please clarify the below question on how to respond when
NULL Connection IP is received in SDP c= line?
1 ) What must be done when NULL IPv6 address in received in SDP c=
line,
should it be used for putting a call on hold, should it be
ignored by sending
