I recently picked up and old (1983) Thermic Sniffler tx. It did not
have a monitor. The Literature that came with it was very complete and
says I need an AM reciever at 49.83 mhz. However, all my AM radios stop
at 5.3 khz. I know that Ace bought out the line and sold them for a few
years but dis
For everyone that needs Ohm's Law there are some sites here that
have some good info & charts to print out, or you can use the list
below
Howard Rudy
http://www.angelfire.com/pa/baconbacon/index.html
http://www.angelfire.com/pa/baconbacon/page2.html
http://www.angelfire.com/pa/baconbacon/page3.ht
For an unusual and useful representation of (almost) real time winds in
the San Francisco bay area, point your (java enabled) browser to:
http://sfports.wr.usgs.gov/wind/streaklines.shtml
Note that your browser must be Java enabled.
(the other) Dave in Berkeley, California
RCSE-List faciliti
Here's the URL for Cabelas: http://www.cabelas.com/ (don't go to the
site without the 's', its some online gaming site that opens up 6
browser windows)
-Ben
Howard Rudy wrote:
>
> In Cabela's 2000 Shooting Catalog ph.# 800-237-
> page 55 item # XL-21-0316-003 #4 Lead Shot,
> 5 lb bag
Martin made a few comments about CNC'd molds that I do not really agree
with. The biggest advantage of using a Computer controlled Machine to
produce Molds is accuracy . The next big advantage is one that a lot of
people have failed to recognize, you can easily produce a fuselage plug in
two piece
In Cabela's 2000 Shooting Catalog ph.# 800-237-
page 55 item # XL-21-0316-003 #4 Lead Shot,
5 lb bag $9.99
Jim Ealy wrote:
> Hi Guys:
>
> I need a cheap source for good old fashion lead shot. (25 lb bags) None of
> the local gun shops carry Remington lead shot anymore.
>
> reply off
You will not have a problem staying an extra night early at Schnepf Farms. There are
still
about 3 RV spots with full hookups open, out of the 24 available. The tent(no hookup)
camping area next to the 60 acre flying field is huge if for some reason the RV spots
fill
up. Both sites have full us
Greetings,
In general, when skinning a wing or laying up a new fuze, will laying
the glass cloth, with the weave at a 45 degrees angle in relationship to
the project, produce more strength than laying it parallel to the
project ?
Thanks
Bob Germano
RCSE-List facilities provided by Model Airpla
8 matches
Mail list logo