Hi all,
I am part of a committee here in NZ that has been asked to look at
implementing safety rules regarding inspections of large aerotowed models.
I see you have some pretty large scale sailplanes in use over there and I
assume you are likely to have some sort of safety/inspection checklist at
m
Here over the ditch in NZ we dont even use the welded ring anymore.
Sleeve the line as you described but put the loop in the line directly on
the hook thru the crown of the chute. Less weight and no hard bits to whack
your tails.
I have yet to catch a tail using this system and I think the slight
A few years ago down under we changed our whole way of numbering
frequencies. We used to use a similar way to the US but now we use the
first number of the freq band and the next 2 are the first numbers after the
decimal point, thus 72.150 becomes channel 715, 72.330 becomes 733 etc.
Very simple a
Technically possible, F3B rules were changed many years ago to stop a
similar occurance by saying that the time stops when the model comes to
rest, not when it first touches the ground. I have the 2003 F3J rules and
they state the time stops when the model first touches the ground or a
ground base
- Original Message -
From: "ROBERT M GELLART" <[EMAIL PROTECTED]>
To: "Les or Gypsy Stockley" <[EMAIL PROTECTED]>;
Sent: Tuesday, August 09, 2005 1:34 AM
Subject: Re: [RCSE] Shocker 3-view, German F3B link
> Lee, none of these seem to work, w
Theres quite a good write up on the Freestyler, an earlier Herrig design at
http://studweb.studserv.uni-stuttgart.de/studweb/users/lrt/lrt28575/proj_fre
estyler.htm
http://studweb.studserv.uni-stuttgart.de/studweb/users/lrt/lrt28575/DC_Frees
t.htm is the design study including the airfoil design.
Hi all, just wanted to tell you all that recently I saw that Samba Model
(Pikes etc) had clear servo hatches ( http://www.f3j.com/accesor.htm ) with
blisters molded in to clear slightly protruding servo arms. Dont need em to
be clear but needed the blisters. After corresponding via email a few ti
I guess Airtronics as Host sponsor with Futaba and JR also being Gold
sponsors of the IHLGF doesn't count then??
Les.
> From: "Jim Deck" <[EMAIL PROTECTED]>
> To: "RCSE"
> Subject: JR Aerotow prompts a question
>
> Witnessing the 3rd JR Aerotow and reliving the experiences with the
many
> fi
For the USA modellers, Tower Hobbies now has stock of 2mm clevises and
couplers.
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXWL54&P=0
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXBWK9&P=0
Cheers, Les.
> Did not know it was difficult to get metric clevices. I will tell Samba.
> M
Hi all, been some discussion on the 9C and I thought I'd share a few things
I've found to make life easier.
Flaps - To get all the flap travel you need, activate the FLP-TRIM mix and
set it to about 40-50%, then turn the VrA knob to about the 3 o'clock
position. You have now offset the entire tra
Had a great day of flying today. Don't normally get out to fly much but got
a lot done today.
First up a friend rang the other day to see if I could help him sort a model
he was having trouble getting consistent launches with. I happen to live
next door to a mile long grass runway that is mostly
Howdy all,
some time ago there was a post about someone who had designed a PC to Futaba
9C interface that could be used to transfer programmes to the PC using the
Campac port.
Have Googled for the last hour or so but can't find it, anyone have the
link?
Cheers, Les.
RCSE-List facilities provided b
Theres the Eraser 48" or 60" from www.flycs.com , they have an agent in the
USA.
Les.
Date: Tue, 30 Nov 2004 12:59:30 -0800
From: "Norm Timbs" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Subject: EPP Slope Trainer
Message-ID: <[EMAIL PROTECTED]>
RCSE,
So besides the Bowman Super Scooter, what ot
Hi all,
I have seen some discussion in the past about the 361 being identical to the
368, however I have found differing specs between the two.
DS36128x30x13mm18g0.15s/40deg
DS36828x30x13mm22g0.11s/40deg
I believe the difference between the two is the 361 has a 3 pole moto
http://www.dse.co.nz/cgi-bin/dse.storefront/4142966b0bde4eda2740c0a87f99074b
/Product/View/W2240
Can one of the electronic gurus out there tell me if this wire would be OK
to use to make servo extensions, my usual supplier is out of stock at the
moment. As a related question, what is considered h
15 matches
Mail list logo
