Mark, The speed controls that are advertised for routers won't work on any motor that has a starting capacitor. Chances are your bandsaw has a capacitor on the motor. You can tell by the sheet metal housing (1 1/2" x 4" or so) that is attached to the side of the motor. A rheostat would change only the voltage which is damaging to AC motors. The only way to vary the speed, aside from changing the pully size, is to go to a DC motor and control. This is all practical knowledge so there may be someone else out there that could tell you more.
Good Luck, Chris Aerofoam wrote: > > I just saw a router speed controller at Harbor Frieght, it is essentially a > rheostat with a rectifier. > Would this work on my bandsaw motor? > I was under the impression that AC motors needed to have a speed controller > that controls the pulse width and that a rheostat would damage the motor, > but this is sold for AC routers. > Can someone fill me in on this? > > Mark Mech > [EMAIL PROTECTED] > www.aerofoam.com > > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and >"unsubscribe" requests to [EMAIL PROTECTED] RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]