Marc. I use an electric blanket when bagging wings in the cold northwest. After the final suck-down, Place the lower "beds" on the blanket. Position the bagged cores on top of beds and carefully fold the E-blanket over the top of the wing..... I have never had a warped wing by using this method. I had a "hot box" but you have to store it someplace........... ----- Original Message ----- From: Marc Webster <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, December 12, 1999 9:28 PM Subject: [RCSE] wing layup with hotbox question? > Hello, > > I am about to vacuum bag lay up a composite wing for a thermal duration > glider called the addiction. I am considering making a hotbox to increase > the curing temperature since winter has arrived. I will be using a hotbox > with a few lightbulbs and a recerculating fan to keep the air moving. The > bulbs will be isolated from direct exposure to the cores by a ceiling in the > box. My question is. Will the hotbox cause the wing to cure faster on the > top than the bottom causing the wing to bow or twist. I use to work at a > mold shop where we used post cure ovens, to allow the molds to cure evenly > they were placed on a large racks to allow the air to flow between them. Do > I need to use a rack as well? If so, chances are the rack will leave marks > on the wing. If anyone has any experience in this matter, please let me > know I do not want to waste a set of cores to learn from a mistake someone > like myself may have already made. > > Thank you, > > Marc Webster > > ______________________________________________________ > Get Your Private, Free Email at http://www.hotmail.com > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]